Potentiometer sensitivity can be increased by – McqOptions

MCQOPTIONS

1.	Potentiometer sensitivity can be increased by
A.	Increasing the current in potentiometer wire
B.	Increasing the length of potentiometer wire
C.	Decreasing the length of potentiometer wire
D.	Replacing the standard cell by a regulated power supply
Answer» C. Decreasing the length of potentiometer wire

Discussion

No Comment Found

Related MCQs

A simple slide wire potentiometer is used for measurement of current in a circuit. The voltage drop across a standard resistor of 0.1 Ω is balanced at 75 cm. Find the magnitude of current if the standard cell emf 1.45 volt is balanced at 50 cm.
DC potentiometer is a/an ________ type instrument.
How many turns of wire are needed to provide a potentiometer with a resolution of 0.05%?
Potentiometer sensitivity can be increased by
Current in a circuit is measured using a simple slide wire. What will be the Voltage drop per unit lengthif the standard cell is of emf 2.38 V balanced at length of 35 cm ?
High value pot resistance leads to _____.
_______ can be used to output a resistance which would be a function of the voltage applied to it.
A 3-turn 100 kΩ potentiometer with 1% linearity uses 30 V supply. What is the potentiometer constant?
Potentiometer is basically a ____________ type instrument
A Murray loop test is conducted on a 400-m long faulty cable. At balance, the resistance connected to the faulty core was set to 40 Ω and the resistance of the resistor connected to the sound core was 60 Ω. What is the distance of the fault from the test end?