Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

The path layer of SONET is responsible for the movement of a signal _________

A. from its optical source to its optical destination
B. across a physical line
C. across a physical section
D. back to its optical source
Answer» C. across a physical section
2.

The photonic layer of the SONET is similar to the __________ of OSI model.

A. network layer
B. data link layer
C. physical layer
D. transport layer
Answer» D. transport layer
3.

In SONET, STS-1 level of electrical signalling has the data rate of _________

A. 51.84 mbps
B. 155.52 mbps
C. 2488.320 mbps
D. 622.080 mbps
Answer» B. 155.52 mbps
4.

Which of the following frequencies is not used in WiMAX for communication?

A. 2.3 ghz
B. 2.4 ghz
C. 2.5 ghz
D. 3.5 ghz
Answer» C. 2.5 ghz
5.

SONET stands for ___________

A. synchronous optical network
B. synchronous operational network
C. stream optical network
D. shell operational network
Answer» B. synchronous operational network
6.

WiMAX is mostly used for __________

A. local area network
B. metropolitan area network
C. personal area network
D. wide area network
Answer» C. personal area network
7.

For encryption, WiMAX supports _______

A. advanced encryption standard
B. triple data encryption standard
C. advanced encryption standard and triple data encryption standard
D. double data encryption standard
Answer» D. double data encryption standard
8.

WiMAX MAC layer provides an interface between ___________

A. higher transport layers and physical layer
B. application layer and network layer
C. data link layer and network layer
D. session layer and application layer
Answer» B. application layer and network layer
9.

Which of the following modulation schemes is supported by WiMAX?

A. binary phase shift keying modulation
B. quadrature phase shift keying modulation
C. quadrature amplitude modulation
D. all of the mentioned
Answer» E.
10.

WiMAX uses the _________

A. orthogonal frequency division multiplexing
B. time division multiplexing
C. space division multiplexing
D. channel division multiplexing
Answer» B. time division multiplexing
11.

WiMAX provides _______

A. voip services
B. iptv services
C. both voip and iptv services
D. no iptv services
Answer» D. no iptv services
12.

WiMAX provides ________

A. simplex communication
B. half duplex communication
C. full duplex communication
D. no communication
Answer» D. no communication
13.

WiMAX stands for ___________

A. wireless maximum communication
B. worldwide interoperability for microwave access
C. worldwide international standard for microwave access
D. wireless internet maximum communication
Answer» C. worldwide international standard for microwave access
14.

A scatternet can have maximum __________

A. 10 piconets
B. 20 piconets
C. 30 piconets
D. 40 piconets
Answer» B. 20 piconets
15.

Bluetooth supports _______

A. point-to-point connections
B. point-to-multipoint connection
C. both point-to-point connections and point-to-multipoint connection
D. multipoint to point connection
Answer» D. multipoint to point connection
16.

Bluetooth transceiver devices operate in ______ band.

A. 2.4 ghz ism
B. 2.5 ghz ism
C. 2.6 ghz ism
D. 2.7 ghz ism
Answer» B. 2.5 ghz ism
17.

What is A2DP (advanced audio distribution profile)?

A. a bluetooth profile for streaming audio
B. a bluetooth profile for streaming video
C. a bluetooth profile for security
D. a bluetooth profile for file management
Answer» B. a bluetooth profile for streaming video
18.

Bluetooth uses __________

A. frequency hopping spread spectrum
B. orthogonal frequency division multiplexing
C. time division multiplexing
D. channel division multiplexing
Answer» B. orthogonal frequency division multiplexing
19.

In a piconet, one master device ________

A. can not be slave
B. can be slave in another piconet
C. can be slave in the same piconet
D. can be master in another piconet
Answer» C. can be slave in the same piconet
20.

Bluetooth is the wireless technology for __________

A. local area network
B. personal area network
C. metropolitan area network
D. wide area network
Answer» C. metropolitan area network
21.

In a piconet, there can be up to ________ parked nodes in the network.

A. 63
B. 127
C. 255
D. 511
Answer» D. 511
22.

An interconnected collection of piconet is called ___________

A. scatternet
B. micronet
C. mininet
D. multinet
Answer» B. micronet
23.

Which protocol assigns IP address to the client connected in the internet?

A. dhcp
B. ip
C. rpc
D. rsvp
Answer» B. ip
24.

Internet works on _______

A. packet switching
B. circuit switching
C. both packet switching and circuit switching
D. data switching
Answer» B. circuit switching
25.

Which of the following protocols is used in the internet?

A. http
B. dhcp
C. dns
D. dns, http and dns
Answer» E.
26.

ISP exchanges internet traffic between their networks by __________

A. internet exchange point
B. subscriber end point
C. isp end point
D. internet end point
Answer» B. subscriber end point
27.

To join the internet, the computer has to be connected to a _________

A. internet architecture board
B. internet society
C. internet service provider
D. different computer
Answer» D. different computer
28.

What is internet?

A. a single network
B. a vast collection of different networks
C. interconnection of local area networks
D. interconnection of wide area networks
Answer» C. interconnection of local area networks
29.

What is WPA?

A. wi-fi protected access
B. wired protected access
C. wired process access
D. wi-fi process access
Answer» B. wired protected access
30.

What is Wired Equivalent Privacy (WEP)?

A. security algorithm for ethernet
B. security algorithm for wireless networks
C. security algorithm for usb communication
D. security algorithm for emails
Answer» C. security algorithm for usb communication
31.

Mostly ________ is used in wireless LAN.

A. time division multiplexing
B. orthogonal frequency division multiplexing
C. space division multiplexing
D. channel division multiplexing
Answer» C. space division multiplexing
32.

In wireless network an extended service set is a set of ________

A. connected basic service sets
B. all stations
C. all access points
D. connected access points
Answer» B. all stations
33.

Which one of the following event is not possible in wireless LAN?

A. collision detection
B. acknowledgement of data frames
C. multi-mode data transmission
D. connection to wired networks
Answer» B. acknowledgement of data frames
34.

A wireless network interface controller can work in _______

A. infrastructure mode
B. ad-hoc mode
C. both infrastructure mode and ad-hoc mode
D. wds mode
Answer» D. wds mode
35.

In wireless distribution system __________

A. multiple access point are inter-connected with each other
B. there is no access point
C. only one access point exists
D. access points are not required
Answer» B. there is no access point
36.

In wireless ad-hoc network _________

A. access point is not required
B. access point is must
C. nodes are not required
D. all nodes are access points
Answer» B. access point is must
37.

What is interframe gap?

A. idle time between frames
B. idle time between frame bits
C. idle time between packets
D. idle time between networks
Answer» B. idle time between frame bits
38.

The maximum size of payload field in ethernet frame is __________

A. 1000 bytes
B. 1200 bytes
C. 1300 bytes
D. 1500 bytes
Answer» E.
39.

A point-to-point protocol over ethernet is a network protocol for __________

A. encapsulating ppp frames inside ethernet frames
B. encapsulating ehternet framse inside ppp frames
C. for security of ethernet frames
D. for security of ppp frames
Answer» B. encapsulating ehternet framse inside ppp frames
40.

High speed ethernet works on _________

A. coaxial cable
B. twisted pair cable
C. optical fiber
D. unshielded twisted pair cable
Answer» D. unshielded twisted pair cable
41.

Ethernet in metropolitan area network (MAN) can be used as ___________

A. pure ethernet
B. ethernet over sdh
C. ethernet over mpls
D. all of the mentioned
Answer» E.
42.

MAC address is of ___________

A. 24 bits
B. 36 bits
C. 42 bits
D. 48 bits
Answer» E.
43.

What is start frame delimeter (SFD) in ethernet frame?

A. 10101010
B. 10101011
C. 00000000
D. 11111111
Answer» C. 00000000
44.

Choose the wrong statement from the following.

A. nslookup is used to query a dns server for dns data
B. ping is used to check connectivity
C. pathping combines the functionality of ping with that of route
D. ifconfig can configure tcp/ip network interface parameters
Answer» D. ifconfig can configure tcp/ip network interface parameters
45.

Ethernet frame consists of ____________

A. mac address
B. ip address
C. default mask
D. network address
Answer» B. ip address
46.

__________ allows checking if a domain is available for registration.

A. domain check
B. domain dossier
C. domain lookup
D. domain registers
Answer» B. domain dossier
47.

Which of the following is not related to ipconfig in Microsoft Windows?

A. display all current tcp/ip network configuration values
B. modify dhcp settings
C. modify dns settings
D. trace the routers in the path to destination
Answer» E.
48.

ICMP is used in _________

A. ping
B. traceroute
C. ifconfig
D. both ping & traceroute
Answer» E.
49.

Ping sweep is a part of _________

A. traceroute
B. nmap
C. route
D. ipconfig
Answer» C. route
50.

Ping can _________

A. measure round-trip time
B. report packet loss
C. report latency
D. all of the mentioned
Answer» E.