In _________ stage, the entry, exit and process requirements areidentified for each activity.

identify project scope and objectives.

identify the products and activities of the project.

. SSADM means ___________.

software systems analysis design method.

straight systems analysis design method.

structured systems analysis design method.

software systems analysis design method.

solutions systems analysis design method.

SSADM means ___________.

software systems analysis design method.

straight systems analysis design method.

structured systems analysis design method.

software systems analysis design method.

solutions systems analysis design method.

system size x productivity rate.

person in months x productivity rate.

____________is part of Risk Management.

risk analysis and risk estimation.

risk control and risk planning.

risk identification and monitoring.

risk control, planning, identification and monitoring.

_________ standards should be in place to ensure that changes to requirements areimplemented in a safe and orderly way.

time control and configuration management

change control and configuration management

time control and configuration management

access control and configuration management

quality control and configuration management

Who is NOT usually present in a technical review?

specialist with knowledge of the application.

the programming tools supplier.

specialist with knowledge of the application.

Defect prevention is defined as ____________.

finding and fixing errors after release.

finding and fixing errors after insertion.

finding and fixing errors before release but after insertion.

finding and fixing errors after release.

Which are the two levels of development suggested by Booch ?

internal and external processes.

176 + Mcqs in Business Policy And Project Management in Bachelor of Business Administration (BBA) Page 2 McqOptions

51.	Security (backups, firewall) will be a ________ requirement.
A.	functional.
B.	non-functional.
C.	normal.
D.	security.
Answer» C. normal.

Discussion

52.	The standard way of evaluating the economic benefits of any projects is to carryout a ________ analysis.
A.	price-benefit.
B.	cost-benefit.
C.	cash flow.
D.	fund flow.
Answer» C. cash flow.

Discussion

53.	The costs that include the salaries and other employment costs of the staff involvedin the project development and all associated costs are called____________.
A.	operational cost.
B.	development cost.
C.	setup cost.
D.	direct cost.
Answer» C. setup cost.

Discussion

54.	Diagrammatic form for Flow oriented Modelling………
A.	functional diagrams.
B.	er diagrams.
C.	data flow diagrams.
D.	system flow diagrams.
Answer» D. system flow diagrams.

Discussion

55.	Requirements engineering provides the mechanism for _________.
A.	understanding custom needs.
B.	assessing facility.
C.	analyzing need.
D.	all of the above .
Answer» E.

Discussion

56.	__________ relates to the physical resources used when the software isexecuted.
A.	functionality.
B.	maintainability.
C.	reliability.
D.	efficiency.
Answer» E.

Discussion

57.	The time by which an activity may be delayed without affecting anysubsequent activity is called _________.
A.	action float.
B.	terminal float.
C.	free float
D.	null float
Answer» D. null float

Discussion

58.	_______ is a modular building block for computer software.
A.	control.
B.	flow.
C.	process.
D.	component.
Answer» E.

Discussion

59.	The shortest time in which we could expect to complete the activity, barringoutright miracles are called ________.
A.	optimistic time.
B.	pessimistic time.
C.	most likely time.
D.	shortest time.
Answer» B. pessimistic time.

Discussion

60.	In _________ stage, the entry, exit and process requirements areidentified for each activity.
A.	review and publicize plan.
B.	identify project scope and objectives.
C.	analyse project.
D.	identify the products and activities of the project.
Answer» E.

Discussion

61.	Number of interrelated activities can be organized in different ways are called______.
A.	activity model.
B.	network model.
C.	hierarchical model.
D.	process model.
Answer» E.

Discussion

62.	The saying "Cannot see the wood for the trees" is associated with ______.
A.	information superhighway.
B.	information overload.
C.	information under load.
D.	assumption.
Answer» C. information under load.

Discussion

63.	Clean-room software development is created by _______.
A.	henry mills.
B.	henry ford.
C.	john mills.
D.	harlan mills.
Answer» E.

Discussion

64.	____ is carried out to calculate the earliest dates on which each activitymay be started and completed.
A.	backward pass.
B.	forward pass.
C.	no pass.
D.	increasing pass.
Answer» C. no pass.

Discussion

65.	. SSADM means ___________.
A.	straight systems analysis design method.
B.	structured systems analysis design method.
C.	software systems analysis design method.
D.	solutions systems analysis design method.
Answer» C. software systems analysis design method.

Discussion

66.	The statement "Putting more people on a late job makes it later" is from_________ law.
A.	brooks.
B.	peters.
C.	parkinson\s.
D.	brokers.
Answer» B. peters.

Discussion

67.	___________ is also a part of design modelling.
A.	user interface design.
B.	testing.
C.	behaviour model.
D.	analysis.
Answer» B. testing.

Discussion

68.	BS EN ISO 9001:2000 is a _____.
A.	external standard.
B.	internal standard.
C.	cmm standard.
D.	tuv standard
Answer» B. internal standard.

Discussion

69.	_________ activities on the network diagram have zero duration and useno resources.
A.	dangling.
B.	dummy.
C.	null.
D.	zero.
Answer» C. null.

Discussion

70.	________ is refined by Barry Boehm and his co-workers.
A.	cocomo iii.
B.	cocomo iv.
C.	cocomo ii.
D.	cocomo i.
Answer» C. cocomo ii.

Discussion

71.	SSADM means ___________.
A.	straight systems analysis design method.
B.	structured systems analysis design method.
C.	software systems analysis design method.
D.	solutions systems analysis design method.
Answer» C. software systems analysis design method.

Discussion

72.	The relationship between program design and program specification can beportrayed in _________.
A.	data flow diagram
B.	product flow diagram
C.	network diagram
D.	data flow diagram
Answer» C. network diagram

Discussion

73.	Sometimes redesigns of the code is often called as ________.
A.	refactoring.
B.	redesigning.
C.	recoding.
D.	rearranging.
Answer» B. redesigning.

Discussion

74.	In PRINCE 2, 2 is meant for ______.
A.	number of clients.
B.	number of standards.
C.	version.
D.	edition.
Answer» D. edition.

Discussion

75.	________ are commonly published as lists or charts.
A.	resources.
B.	work plans.
C.	study plans.
D.	budgets.
Answer» C. study plans.

Discussion

76.	_______ is a qualitative measure of the degree to which classes areconnected to one another.
A.	cohesion.
B.	coupling.
C.	control.
D.	coordination.
Answer» C. control.

Discussion

77.	Effort = __________.
A.	system size x productivity rate.
B.	system size x kloc.
C.	person in months / sloc.
D.	person in months x productivity rate.
Answer» B. system size x kloc.

Discussion

78.	In _________, the priority activities are allocated resources in ascendingorder of total. float.
A.	total free.
B.	total float.
C.	technical float.
D.	top float.
Answer» C. technical float.

Discussion

79.	When a customer does not identify a detailed input, processing or outputrequirements, _______ model is used.
A.	prototyping.
B.	rad.
C.	incremental.
D.	spiral.
Answer» B. rad.

Discussion

80.	Ensuring that all the loose ends of a project are tied up is called as___________.
A.	demanding.
B.	decomposing.
C.	determining.
D.	decommissioning.
Answer» E.

Discussion

81.	The products handed over to the clients at the end of projects are called as_____________.
A.	software.
B.	application program.
C.	deliverables.
D.	intermediate products.
Answer» D. intermediate products.

Discussion

82.	One can_______ is classified into Functional and Non-functional.
A.	project.
B.	requirements.
C.	start date. .
D.	risk
Answer» C. start date. .

Discussion

83.	Projects are __________ by definition and therefore more uncertain than normalundertakings.
A.	routine
B.	non-routine
C.	specific
D.	controllable
Answer» C. specific

Discussion

84.	____________is part of Risk Management.
A.	risk analysis and risk estimation.
B.	risk control and risk planning.
C.	risk identification and monitoring.
D.	risk control, planning, identification and monitoring.
Answer» E.

Discussion

85.	_________ indicates the connectedness of the system that can be derivedmechanically.
A.	dependency.
B.	re-occurrence.
C.	inheritance
D.	relationship.
Answer» E.

Discussion

86.	The activities have zero duration but are assumed to start at the sametime as the first and the end at the same time as the last one iscalled__________ activity.
A.	hijacked.
B.	heuristic.
C.	hammocked.
D.	hole.
Answer» D. hole.

Discussion

87.	_________ standards should be in place to ensure that changes to requirements areimplemented in a safe and orderly way.
A.	change control and configuration management
B.	time control and configuration management
C.	access control and configuration management
D.	quality control and configuration management
Answer» B. time control and configuration management

Discussion

88.	. The scope of the deliverables for an increment is rigidly constrained by anagreed deadline called as ____________.
A.	sand boxing.
B.	time boxing.
C.	time delaying.
D.	local delaying.
Answer» C. time delaying.

Discussion

89.	Who is NOT usually present in a technical review?
A.	user.
B.	quality engineer.
C.	the programming tools supplier.
D.	specialist with knowledge of the application.
Answer» D. specialist with knowledge of the application.

Discussion

90.	Which of the following is NOT part of a software quality assurance plan?
A.	reference documents.
B.	configuration action.
C.	supplier control.
D.	customer control.
Answer» D. customer control.

Discussion

91.	Recruitment and training cost falls under _______ cost.
A.	developmental.
B.	data.
C.	profit
D.	setup.
Answer» E.

Discussion

92.	The calculation of __________ is a project evaluation technique that takes intoaccount the profitability of a project and the timing of cash flows that are produced.
A.	npv.
B.	tpv.
C.	spv.
D.	lpv.
Answer» B. tpv.

Discussion

93.	Time behaviour is the sub-characteristics of _______.
A.	maintainability.
B.	efficiency.
C.	usability.
D.	reliability.
Answer» C. usability.

Discussion

94.	A ________ specification is concerned with how much is to spent on thesystem.
A.	functional.
B.	quality.
C.	resource.
D.	scope.
Answer» D. scope.

Discussion

95.	Level 0 data flow diagrams are otherwise known as _______ .
A.	functional diagrams.
B.	er diagrams.
C.	data flow diagrams.
D.	context flow diagrams.
Answer» E.

Discussion

96.	Defect prevention is defined as ____________.
A.	finding and fixing errors after insertion.
B.	finding and fixing errors before release but after insertion.
C.	finding and fixing errors after release.
D.	avoiding defect insertion.
Answer» C. finding and fixing errors after release.

Discussion

97.	he Cost Benefit Analysis is done for ___________ feasibility.
A.	social
B.	technical.
C.	programm
D.	economical.
Answer» E.

Discussion

98.	Which are the two levels of development suggested by Booch ?
A.	micro and macro processes.
B.	inter and intra processes.
C.	internal and external processes.
D.	small and large processes.
Answer» D. small and large processes.

Discussion

99.	Cost Benefit Analysis is done for ___________ feasibility.
A.	social
B.	technical.
C.	process.
D.	economical.
Answer» E.

Discussion

100.	The percentage of a particular time interval that a system is usable iscalled _____.
A.	time interval.
B.	availability.
C.	utility.
D.	mean time.
Answer» C. utility.

Discussion

Explore topic-wise MCQs in Bachelor of Business Administration (BBA).

Security (backups, firewall) will be a ________ requirement.

The standard way of evaluating the economic benefits of any projects is to carryout a ________ analysis.

The costs that include the salaries and other employment costs of the staff involvedin the project development and all associated costs are called____________.

Diagrammatic form for Flow oriented Modelling………

Requirements engineering provides the mechanism for _________.

__________ relates to the physical resources used when the software isexecuted.

The time by which an activity may be delayed without affecting anysubsequent activity is called _________.

_______ is a modular building block for computer software.

The shortest time in which we could expect to complete the activity, barringoutright miracles are called ________.

In _________ stage, the entry, exit and process requirements areidentified for each activity.

Number of interrelated activities can be organized in different ways are called______.

The saying "Cannot see the wood for the trees" is associated with ______.

Clean-room software development is created by _______.

____ is carried out to calculate the earliest dates on which each activitymay be started and completed.

. SSADM means ___________.

The statement "Putting more people on a late job makes it later" is from_________ law.

___________ is also a part of design modelling.

BS EN ISO 9001:2000 is a _____.

_________ activities on the network diagram have zero duration and useno resources.

________ is refined by Barry Boehm and his co-workers.

SSADM means ___________.

The relationship between program design and program specification can beportrayed in _________.

Sometimes redesigns of the code is often called as ________.

In PRINCE 2, 2 is meant for ______.

________ are commonly published as lists or charts.

_______ is a qualitative measure of the degree to which classes areconnected to one another.

Effort = __________.

In _________, the priority activities are allocated resources in ascendingorder of total. float.

When a customer does not identify a detailed input, processing or outputrequirements, _______ model is used.

Ensuring that all the loose ends of a project are tied up is called as___________.

The products handed over to the clients at the end of projects are called as_____________.

One can_______ is classified into Functional and Non-functional.

Projects are __________ by definition and therefore more uncertain than normalundertakings.

____________is part of Risk Management.

_________ indicates the connectedness of the system that can be derivedmechanically.

The activities have zero duration but are assumed to start at the sametime as the first and the end at the same time as the last one iscalled__________ activity.

_________ standards should be in place to ensure that changes to requirements areimplemented in a safe and orderly way.

. The scope of the deliverables for an increment is rigidly constrained by anagreed deadline called as ____________.

Who is NOT usually present in a technical review?

Which of the following is NOT part of a software quality assurance plan?

Recruitment and training cost falls under _______ cost.

The calculation of __________ is a project evaluation technique that takes intoaccount the profitability of a project and the timing of cash flows that are produced.

Time behaviour is the sub-characteristics of _______.

A ________ specification is concerned with how much is to spent on thesystem.

Level 0 data flow diagrams are otherwise known as _______ .

Defect prevention is defined as ____________.

he Cost Benefit Analysis is done for ___________ feasibility.

Which are the two levels of development suggested by Booch ?

Cost Benefit Analysis is done for ___________ feasibility.

The percentage of a particular time interval that a system is usable iscalled _____.