The production run should be _______ the regeneration process.

1.	The production run should be _______ the regeneration process.
A.	Shorter than
B.	Longer than
C.	Equal to
D.	Nearer to
Answer» E.

Discussion

No Comment Found

Related MCQs

The treatment system includes a WAC, SAC, followed by a WBA and SBA. There is a degasser in this system. Calculate the amount of SBA resin required for the following data.M Alkalinity: 100 ppm as CaCO3P Alkalinity: 100 ppm as CaCO3Silica: 30 ppm as CaCO3CO2: 45 ppm as CaCO3EMA: 100 ppm as CaCO3Capacity: 37 Kg/m3Correction factor: 0.9Flow rate: 35 m3/hrOperation hours: 10 hrs
The treatment system includes a WAC, SAC, followed by a WBA and SBA. There is no degasser in this system. Calculate the amount of resin required for the following information.M Alkalinity: 100 ppm as CaCO3P Alkalinity: 100 ppm as CaCO3Silica: 45 ppm as CaCO3CO2: 45 ppm as CaCO3Capacity: 37 Kg/m3Correction factor: 0.9Flow rate: 35 m3/hrOperation hours: 10 hrs
The treatment system consists of a WAC, SAC which is followed by a WBA and SBA. Calculate the amount of WBA resin required for the following data.M Alkalinity: 100 ppm as CaCO3P Alkalinity: 100 ppm as CaCO3EMA: 25 ppm as CaCO3Capacity: 37 Kg/m3Correction factor: 0.9Flow rate: 135 m3/hrOperation hours: 20 hrs
Calculate the SAC resin required for the following data. It should be noted that prior to the SAC, a WAC system is present.M Alkalinity: 100 ppm as CaCO3P Alkalinity: 100 ppm as CaCO3EMA: 50 ppm as CaCO3Capacity: 57 Kg/m3Correction factor: 0.9Flow rate: 135 m3/hrOperation hours: 20 hrs
Calculate the amount of resin required for the following information.Cation Load: 100 ppm as CaCO3Capacity: 57 Kg/m3Correction factor: 0.9Flow rate: 135 m3/hrOperation hours: 20 hrs
Calculate the amount of resin required for the following information.Cation Load: 80 ppm as CaCO3Capacity: 47 Kg/m3Correction factor: 0.9Flow rate: 135 m3/hrOperation hours: 20 hrs
Calculate the amount of resin required for the following information.Cation Load: 30 ppm as CaCO3Capacity: 47 Kg/m3Correction factor: 0.9Flow rate: 135 m3/hrOperation hours: 20 hrs
Calculate the amount of resin required for the following information.Cation Load: 10 ppm as CaCO3Capacity: 47 Kg/m3Correction factor: 0.9Flow rate: 135 m3/hrOperation hours: 20 hrs
_________resins can neutralize strong bases.
Which is the year zeolite was used as ion exchange water softeners?

The production run should be _______ the regeneration process.

Discussion

No Comment Found

Related MCQs

Reply to Comment