 
			 
			MCQOPTIONS
 Saved Bookmarks
				This section includes 23 Mcqs, each offering curated multiple-choice questions to sharpen your Waste Water Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 1. | Which of these is not a grit removal equipment installed in the aerated grit chamber? | 
| A. | Screw conveyers | 
| B. | Tubular conveyers | 
| C. | Jet pumps | 
| D. | Communitors | 
| Answer» E. | |
| 2. | What is the detention time considered for aerated grit chamber? | 
| A. | 5-6 mins | 
| B. | 2-5 mins | 
| C. | 1-2 mins | 
| D. | 3-4 mins | 
| Answer» C. 1-2 mins | |
| 3. | What is the horizontal velocity considered for grit chamber? | 
| A. | 0.25-0.4m/sec | 
| B. | 0.6-0.9 m/sec | 
| C. | 1-2 m/sec | 
| D. | 3-4m/sec | 
| Answer» B. 0.6-0.9 m/sec | |
| 4. | Stoke’s law holds good for Reynolds’s number ______ | 
| A. | Less than 1 | 
| B. | Equal to 1 | 
| C. | Greater than 1 | 
| D. | Nearer to 1 | 
| Answer» B. Equal to 1 | |
| 5. | WHAT_IS_THE_HORIZONTAL_VELOCITY_CONSIDERED_FOR_GRIT_CHAMBER??$ | 
| A. | 0.25-0.4m/sec | 
| B. | 0.6-0.9 m/sec | 
| C. | 1-2 m/sec | 
| D. | 3-4m/sec | 
| Answer» B. 0.6-0.9 m/sec | |
| 6. | Which of these is not a grit removal equipment installed in the aerated grit chamber?$ | 
| A. | Screw conveyers | 
| B. | Tubular conveyers | 
| C. | Jet pumps | 
| D. | Communitors | 
| Answer» E. | |
| 7. | What is the detention time considered for aerated grit chamber?$ | 
| A. | 5-6 mins | 
| B. | 2-5 mins | 
| C. | 1-2 mins | 
| D. | 3-4 mins | 
| Answer» C. 1-2 mins | |
| 8. | Aerated grit chambers are usually designed to remove particles in which range of size? | 
| A. | 0.1mm diameter | 
| B. | 0.35 mm diameter | 
| C. | 0.21 mm diameter | 
| D. | 0.41 mm diameter | 
| Answer» D. 0.41 mm diameter | |
| 9. | Usually while designing what is the range of depth of the aerated grit chamber assumed? | 
| A. | 0.5-2 m | 
| B. | 8-10 m | 
| C. | 2-5 m | 
| D. | 12 m | 
| Answer» D. 12 m | |
| 10. | Usually while designing what is the range of length of the aerated grit chamber assumed? | 
| A. | 7.5-20 | 
| B. | 4-6 m | 
| C. | 25 m | 
| D. | 50 m | 
| Answer» B. 4-6 m | |
| 11. | Usually while designing what is the range of the width of the aerated grit chamber assumed? | 
| A. | 0.5-2 m | 
| B. | 8-10 m | 
| C. | 2.5-7.0m | 
| D. | 12m | 
| Answer» D. 12m | |
| 12. | What is the amount of grit quantities captured by the aerated grit chamber? | 
| A. | 0.004-0.20 m<sup>3</sup>/10<sup>3</sup>.m<sup>3</sup> | 
| B. | 0.25 m<sup>3</sup>/10<sup>3</sup>.m<sup>3</sup> | 
| C. | <0.004 m<sup>3</sup>/10<sup>3</sup>.m<sup>3</sup> | 
| D. | 0.5 m<sup>3</sup>/10<sup>3</sup>.m<sup>3</sup> | 
| Answer» B. 0.25 m<sup>3</sup>/10<sup>3</sup>.m<sup>3</sup> | |
| 13. | At what depth are the air diffusers placed in the grit chamber? | 
| A. | 0.6-0.9 m | 
| B. | 1-2 m | 
| C. | 0.1-0.4m | 
| D. | 0.45-0.6 m | 
| Answer» E. | |
| 14. | What is the amount of air supplied for these grit chambers? | 
| A. | 1-2 m<sup>3</sup>/m.min | 
| B. | 0.2-0.5 m<sup>3</sup>/m.min | 
| C. | 0.5-0.8 m<sup>3</sup>/m.min | 
| D. | 0.8-1 m<sup>3</sup>/m.min | 
| Answer» C. 0.5-0.8 m<sup>3</sup>/m.min | |
| 15. | Stoke’s law holds good for Reynolds’s number _____?# | 
| A. | Less than 1 | 
| B. | Equal to 1 | 
| C. | Greater than 1 | 
| D. | Nearer to 1 | 
| Answer» B. Equal to 1 | |
| 16. | What is the specific gravity of settleable particles in the grit chamber? | 
| A. | 2.98 | 
| B. | 2.56 | 
| C. | 2.65 | 
| D. | 2.89 | 
| Answer» D. 2.89 | |
| 17. | Grit chamber is similar to which of the following? | 
| A. | Screening unit | 
| B. | Sedimentation tank | 
| C. | Coagulation tank | 
| D. | Sand bed | 
| Answer» C. Coagulation tank | |
| 18. | What is the cleaning period for manual grit chambers? | 
| A. | 3 days | 
| B. | 5 days | 
| C. | 48 hours | 
| D. | 1 week | 
| Answer» E. | |
| 19. | Grit chambers are constructed to prevent their accumulation in _______ | 
| A. | Sedimentation tank | 
| B. | Sludge digesters | 
| C. | Coagulation tank | 
| D. | Sand filter | 
| Answer» C. Coagulation tank | |
| 20. | Grit chamber is constructed to protect the further mechanical equipment of the water treatment plant. | 
| A. | True | 
| B. | False | 
| Answer» B. False | |
| 21. | At what velocity will the particles settle down? | 
| A. | 0.5 m/s | 
| B. | 0.3 m/s | 
| C. | 0.1 m/s | 
| D. | 0.25 m/s | 
| Answer» C. 0.1 m/s | |
| 22. | A grit chamber is usually installed ______ primary sedimentation tanks. | 
| A. | Before | 
| B. | After | 
| C. | In between | 
| D. | In | 
| Answer» B. After | |
| 23. | In aerated grit chambers, there are no moving parts below the water surface. | 
| A. | True | 
| B. | False | 
| Answer» B. False | |