MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 107 Mcqs, each offering curated multiple-choice questions to sharpen your Waste Water Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 51. |
Which of the following is the main goal for the choice of scenarios? |
| A. | There be a sufficient number to reflect the views of all the stakeholders |
| B. | They should reflect the important quality requirements |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 52. |
What are the concerns raised for the scenario selection procedure? |
| A. | Does the locality of change necessarily yield higher cost? |
| B. | How would we know if the vendor representatives were being factual? |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» C. All of the mentioned | |
| 53. |
Which of the following are scenarios for the financial management system analysis? |
| A. | Bottom Up person |
| B. | Multiple fiscal year budgets |
| C. | Degraded operation mode |
| D. | All of the mentioned |
| Answer» E. | |
| 54. |
Which of the following is the incorrect sequence Summary Steps for scenario selection process? |
| A. | Participant buy-in and expression of concerns and issues |
| B. | Method presentation |
| C. | Refinement and selection |
| D. | All of the mentioned |
| Answer» B. Method presentation | |
| 55. |
Architecture description language represent architectural structures that can be divided into which of the following? |
| A. | Static |
| B. | Dynamic |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 56. |
Which of the following are true for pattern? |
| A. | It is a small collection of atomic units |
| B. | They are ubiquitous throughout software development |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 57. |
Which of the following questions that could be answered during a review? |
| A. | The Question has to do with architecture as an artifact or product? |
| B. | The Question Looks for the process of creating and using the architecture for development |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 58. |
The behavior of the system can be communicated by which of the following? |
| A. | By using execution models |
| B. | By using Animation techniques |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 59. |
The proto scenarios recorded on flip charts as phrases as which of the following? |
| A. | Degraded Operation |
| B. | WWW client access |
| C. | Double number of user |
| D. | All of the mentioned |
| Answer» E. | |
| 60. |
What does + sign indicate in the final report for financial management system? |
| A. | System supports that the scenario directly is a part of its as-delivered capability |
| B. | System would have to be regenerated in order to achieve the desired capability |
| C. | Scenario cannot be performed by the delivered system |
| D. | None of the mentioned |
| Answer» B. System would have to be regenerated in order to achieve the desired capability | |
| 61. |
What does 0 sign indicate in the final report for financial management system? |
| A. | System supports that the scenario directly is a part of its as-delivered capability |
| B. | System would have to be regenerated in order to achieve the desired capability |
| C. | Scenario cannot be performed by the delivered system |
| D. | None of the mentioned |
| Answer» C. Scenario cannot be performed by the delivered system | |
| 62. |
Which of the following is the essential feature of ADL? |
| A. | The ability to provide structures |
| B. | The ability to declare a component and name its type |
| C. | The ability to support analytical capability |
| D. | All of the mentioned |
| Answer» C. The ability to support analytical capability | |
| 63. |
Which of the following are considered during Systems construction? |
| A. | What are the components? |
| B. | Are components modules that exist only at design time but are compiles together before run-time |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 64. |
Which of the following are the scenarios considered for an ADL used to build a system? |
| A. | The system would be initially described through a textual or graphical input |
| B. | Information that describes the behavior of the system uses use cases |
| C. | The Components are refined as necessary for each type of analysis |
| D. | All of the mentioned |
| Answer» E. | |
| 65. |
The amount of scenario interaction is related to which of the following metrics? |
| A. | Structural Complexity |
| B. | Coupling |
| C. | Cohesion |
| D. | All of the mentioned |
| Answer» E. | |
| 66. |
Which of the following is possible to design a simple language? |
| A. | Variations codified in a systematic fashion |
| B. | Variations in a non systematic fashion |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» B. Variations in a non systematic fashion | |
| 67. |
Which of the following is the lure of software product line? |
| A. | A collection of sharing a managed set of features constructed from a common set of core software assets |
| B. | Substantial benefits such as reduced cost of construction and reduced time to market |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 68. |
Where are HCI architectures used? |
| A. | Virtual reality |
| B. | Mobile computing |
| C. | CSCW systems |
| D. | All of the mentioned |
| Answer» E. | |
| 69. |
Which of the following are different form of benefits? |
| A. | Financial Benefits |
| B. | Forced Preparation for the Review |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 70. |
Which of the following is not a part of commonality? |
| A. | Data structure used |
| B. | Algorithm employed |
| C. | Architecture of the parser |
| D. | None of the mentioned |
| Answer» E. | |
| 71. |
Which of the following is true about Architecture review teams? |
| A. | Architecture review teams should normally include members of the development project |
| B. | Architecture review teams normally may or may not include members of the development project |
| C. | Architecture review teams should normally not include members of the development project |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 72. |
Which of the following are anecdotes of estimated cost savings for the customers of reviews? |
| A. | Early analysis of an electronic funds transfer system showed 50$ billion transfer capability per night |
| B. | In architecture review of a revision control system, a number of severe limitations in achieving system portability and modifiability |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 73. |
Which of the following is true for architectural review? |
| A. | Architectural review tend to increase quality,control cost and decrease budget risk |
| B. | Architectural review tend to decrease quality,control cost and decrease budget risk |
| C. | Architectural review tend to decrease quality,control cost and increase budget risk |
| D. | None of the mentioned |
| Answer» B. Architectural review tend to decrease quality,control cost and decrease budget risk | |
| 74. |
Which of the following is true about architecture? |
| A. | An architecture does guarantee high quality or low cost |
| B. | An architecture hardly points out areas of risk in a design |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» E. | |
| 75. |
Which of the following nine-early warning signs of architecture problems? |
| A. | The architecture is not forced to match the current organization |
| B. | Top Level architecture components number less than 25 |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» E. | |
| 76. |
Which of the following estimations are done for evaluation process? |
| A. | Performance |
| B. | Reliability |
| C. | Availability |
| D. | All of the mentioned |
| Answer» E. | |
| 77. |
Which of the following are different cost techniques? |
| A. | Staff Time |
| B. | Organization overhead for architecture review unit |
| C. | Consumption of senior designers for architecture review teams |
| D. | All of the mentioned |
| Answer» E. | |
| 78. |
What does – sign indicate in the final report for financial management system? |
| A. | System supports that the scenario directly is a part of its as-delivered capability |
| B. | System would have to be regenerated in order to achieve the desired capability |
| C. | Scenario cannot be performed by the delivered system |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 79. |
What are subset controllers? |
| A. | Subset controllers are used to interconnect a set of functionality related components |
| B. | They are used to achieve the simulation of a subsystem as a whole |
| C. | Mediate control and a-periodic communications |
| D. | All of the mentioned |
| Answer» E. | |
| 80. |
Which of the following is true and can be achieved? |
| A. | High performance, security, fault tolerance and low cost are difficult demands and impossible to achieve simultaneously |
| B. | High performance, security, fault tolerance and low cost are easy demands and impossible to achieve simultaneously |
| C. | High performance, security, fault tolerance and low cost are easy demands and possible to achieve simultaneously |
| D. | None of the mentioned |
| Answer» C. High performance, security, fault tolerance and low cost are easy demands and possible to achieve simultaneously | |
| 81. |
What do Creating of skeletal system mean? |
| A. | Defining of software architecture |
| B. | Using architecture in the first implementation task |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» C. All of the mentioned | |
| 82. |
What is scenario? |
| A. | It is a brief description of a single interaction of a stakeholder with a system |
| B. | It servers as a representative for an entire class of scenarios |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 83. |
Which of the following are the changes that most of the architecture follow? |
| A. | Change in the internal working of one or more component |
| B. | Change that affect an interface among the components |
| C. | Change that affect the architecture |
| D. | All of the mentioned |
| Answer» E. | |
| 84. |
Which of the following must be estimated for reliability analysis? |
| A. | Reliability of each component |
| B. | Resource usage of the component |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» B. Resource usage of the component | |
| 85. |
For what purpose Compiler technology is used? |
| A. | To determine the static data relationships among components |
| B. | To determine the execution behavior of the system |
| C. | To extract software relationship |
| D. | All of the mentioned |
| Answer» D. All of the mentioned | |
| 86. |
What of the following is considered while evaluating scenarios? |
| A. | When is architecture generated to sufficient number of scenarios to adequately test the architecture |
| B. | When should one stop generating new scenarios |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 87. |
What is compression used for? |
| A. | To improve performance |
| B. | To circumvent layering when it does not provide needed services |
| C. | To speed system development |
| D. | All of the mentioned |
| Answer» E. | |
| 88. |
What is Resource Sharing? |
| A. | It is an operation that encapsulates either data or services and shares them among multiple independent consumers |
| B. | It is the operation which places distinct piece of functionality into distinct component |
| C. | It is the operation of separating a large system component into two or more smaller ones |
| D. | None of the mentioned |
| Answer» B. It is the operation which places distinct piece of functionality into distinct component | |
| 89. |
THE_LAW_OF__________STATES_THAT_MASS_CAN_NEITHER_BE_CREATED_NOR_DESTROYED.?$ |
| A. | Radiation |
| B. | Wastewater |
| C. | Conversion of mass |
| D. | Water |
| Answer» D. Water | |
| 90. |
While designing a mechanical screen, the clear space between the bars would be in what range?$ |
| A. | 15-75mm |
| B. | 25-50mm |
| C. | 20-40mm |
| D. | >75mm |
| Answer» B. 25-50mm | |
| 91. |
What_is_the_size_of_openings_of_a_coarse_screen?$ |
| A. | 6mm-150mm |
| B. | 150-200mm |
| C. | >200mm |
| D. | < 6mm |
| Answer» B. 150-200mm | |
| 92. |
What is the detention time considered while designing a Grit chamber? |
| A. | 20-40 sec |
| B. | 10-20 sec |
| C. | 90-120 sec |
| D. | 45-90 sec |
| Answer» E. | |
| 93. |
Which of these is not a type of grit chamber |
| A. | Horizontal flow |
| B. | Vortex |
| C. | Vertical flow |
| D. | Aerated |
| Answer» D. Aerated | |
| 94. |
In order to prevent clogging what should be provided prior to tube settlers? |
| A. | Clarifiers |
| B. | Coarse screen |
| C. | Fine screen |
| D. | Grit chamber |
| Answer» D. Grit chamber | |
| 95. |
Which type of mixer is used when the flow needs to be changed often? |
| A. | Paddle mixer |
| B. | Static mixer |
| C. | Mechanical mixer |
| D. | Mechanical aerator |
| Answer» C. Mechanical mixer | |
| 96. |
Which type of mixers are used to mix coagulants like alum, ferric ammonium sulphate and coagulant aids such as polyelectrolyte and lime? |
| A. | Static mixers |
| B. | Mechanical mixers |
| C. | Mechanical aerators |
| D. | Paddle mixers |
| Answer» E. | |
| 97. |
What is the percentage of TSS removed by a rotary drum fine screen? |
| A. | 50% |
| B. | 60% |
| C. | 65-75% |
| D. | 25-45% |
| Answer» E. | |
| 98. |
What is the size of the openings for a fine screen? |
| A. | 0.1 mm |
| B. | 0.8-1mm |
| C. | 0.2-0.6mm |
| D. | 1-3mm |
| Answer» D. 1-3mm | |
| 99. |
What is the maximum approach velocity to be considered for a mechanical screen while designing it? |
| A. | 0.3-0.5m/s |
| B. | 0.6-1m/s |
| C. | 1-1.5m/s |
| D. | 2 m/s |
| Answer» C. 1-1.5m/s | |
| 100. |
How are colour and odour removed? |
| A. | Adsorption |
| B. | Sedimentation |
| C. | Filtration |
| D. | Coagulation |
| Answer» B. Sedimentation | |