MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 107 Mcqs, each offering curated multiple-choice questions to sharpen your Waste Water Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
While designing a mechanical screen, the clear space between the bars would be in what range? |
| A. | 15-75mm |
| B. | 25-50mm |
| C. | 20-40mm |
| D. | >75mm |
| Answer» B. 25-50mm | |
| 2. |
What is the size of openings of a coarse screen? |
| A. | 6mm-150mm |
| B. | 150-200mm |
| C. | >200mm |
| D. | < 6mm |
| Answer» B. 150-200mm | |
| 3. |
The law of ________ states that mass can neither be created nor destroyed. |
| A. | Radiation |
| B. | Wastewater |
| C. | Conversion of mass |
| D. | Water |
| Answer» D. Water | |
| 4. |
Which of the following is true for the application generator? |
| A. | Programs that take specification of other program as input |
| B. | Programs that produce specifications input of program to output |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 5. |
Architecture embodies the commonalities across which of the following versions of system? |
| A. | Prototyping |
| B. | Product variation |
| C. | Deployment |
| D. | All of the mentioned |
| Answer» E. | |
| 6. |
Which of the following describes module? |
| A. | The module is the presentation layer of a human computer interaction system |
| B. | The module is a process scheduler that hides the number of available processors and scheduling algorithms |
| C. | The module is the Physical Models that encapsulates the equations used to compute values about the physical environment |
| D. | All of the mentioned |
| Answer» E. | |
| 7. |
What is incorrect of the following? |
| A. | The impact of an organization on an architecture is less subtle but not equally strong as the impact of architecture on the organization |
| B. | The impact of an organization on an architecture is more subtle but equally strong as the impact of architecture on the organization |
| C. | The module is the presentation layer of a human computer interaction system |
| D. | None of the mentioned |
| Answer» B. The impact of an organization on an architecture is more subtle but equally strong as the impact of architecture on the organization | |
| 8. |
Which of the following is necessity for a subsystem controller? |
| A. | Initialize themselves and each of their components to a set of initial conditions in response to an event |
| B. | Route requests for malfunctions and the setting of simulations parameters to their components based on knowledge of component capabilities |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 9. |
Which of the following are the steps for FAST? |
| A. | Disagree on codification of variations |
| B. | Build the application generator |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» C. All of the mentioned | |
| 10. |
How is Testing simplified when a template is allowed in component? |
| A. | Each component has a standard structure |
| B. | Each component has a complex structure |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» B. Each component has a complex structure | |
| 11. |
Which of the following points are considered according to the con way? |
| A. | Take any two nodes x and y of the system, either they are joined by a branch or they are not |
| B. | If there is no branch between x and y they they do not communicate |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 12. |
Which of the following is true about the bottom up strategies? |
| A. | Starting at the highest level of system abstraction and recursively filling in understanding of the subparts |
| B. | Understanding the lowest level components and how these work together to accomplish the system’s goals |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» C. All of the mentioned | |
| 13. |
Which of the following is parser generator? |
| A. | YACC |
| B. | YBAC |
| C. | YAAC |
| D. | YCAA |
| Answer» B. YBAC | |
| 14. |
Which of the following is true in context to Language oriented Attributes? |
| A. | They are related to the application system derived from the architecture that was encoded in ADL |
| B. | These are attributes of ADL, independent of the system being used to develop |
| C. | They tell us how the ADL is used to create,validate and refine an architecture description |
| D. | All of the mentioned |
| Answer» C. They tell us how the ADL is used to create,validate and refine an architecture description | |
| 15. |
Which of the following is true for the teams? |
| A. | Teams within the organization works on components |
| B. | Within each team there has to be high bandwidth communications |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 16. |
Which of the following must be estimated for performance analysis? |
| A. | Reliability of each component |
| B. | Resource usage of the component |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» C. All of the mentioned | |
| 17. |
A product line affects which of the following ? |
| A. | Relationship with its customers |
| B. | Organization in its structure |
| C. | Training of staff |
| D. | All of the mentioned |
| Answer» E. | |
| 18. |
Which of the following is true for YACC? |
| A. | It accepts specification for a parser as input |
| B. | It produces parser as output |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 19. |
Which of the following is true in context to Process oriented Attributes? |
| A. | They are related to the application system derived from the architecture that was encoded in ADL |
| B. | These are attributes of ADL, independent of the system being used to develop |
| C. | They tell us how the ADL is used to create,validate and refine an architecture description |
| D. | All of the mentioned |
| Answer» D. All of the mentioned | |
| 20. |
Which of the following question describe Process oriented Attributes of ADL? |
| A. | Is there a textual editor, a tool for directly manipulating textual descriptions of the architecture? |
| B. | How Suitable is ADL for representing a particular type of application system? |
| C. | Are the ADL’s Syntax and semantics formally defined? |
| D. | All of the mentioned |
| Answer» B. How Suitable is ADL for representing a particular type of application system? | |
| 21. |
Which of the following are the problems associated within product line? |
| A. | Managing its evolution |
| B. | Managing evolution of individual products |
| C. | Managing already deployed products |
| D. | All of the mentioned |
| Answer» E. | |
| 22. |
Why is the organizational structure that is aligned only with architectural structure is not adequate? |
| A. | Any particular change may require modification to a variety of architectural components |
| B. | Individuals in the customer response team make modifications to the whole system |
| C. | Individuals must be outside of any team that has responsibility for any particular group of components |
| D. | All of the mentioned |
| Answer» E. | |
| 23. |
Which of the following describes change? |
| A. | Any particular change may not necessary require modification to a variety of architectural components |
| B. | Any particular change does not require modification to a variety of architectural components |
| C. | Any particular change may require modification to a variety of architectural components |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 24. |
Which of the following is incorrect with respect to skeletal system? |
| A. | More integration planning and development work occur earlier in the product’s life cycle |
| B. | The testing and review can be done incrementally as each sub system come on line |
| C. | It increases integration time and cost |
| D. | All of the mentioned |
| Answer» D. All of the mentioned | |
| 25. |
Which of the following are followed for creating product? |
| A. | Requirements for a system have been analyzed |
| B. | Its pattern developed |
| C. | Skeletal system created and fleshed out |
| D. | All of the mentioned |
| Answer» E. | |
| 26. |
What kind of model is Flight simulation model? |
| A. | Structural |
| B. | Visual |
| C. | Architectural |
| D. | None of the mentioned |
| Answer» B. Visual | |
| 27. |
Which of the following is true for pipe? |
| A. | From External perspective pipe has a true state |
| B. | From Internal perspective pipe is stateless |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» E. | |
| 28. |
Which of the following in context to data in pipeline is correct? |
| A. | The format conversion should be allowed as long as data that exit the pipe are semantically equivalent to the data that enter the pipe |
| B. | The format conversion should be allowed as long as data that exit the pipe are syntactically equivalent to the data that enter the pipe |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» B. The format conversion should be allowed as long as data that exit the pipe are syntactically equivalent to the data that enter the pipe | |
| 29. |
Which of the following support the difference between Architecture Language and Modelling language? |
| A. | Architecture language describes about problem spaces |
| B. | Modelling language are more concerned with the behaviors of the whole |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» C. All of the mentioned | |
| 30. |
Which of the following are minimal set of requirements for a language to be an ADL? |
| A. | An ADL must support the tasks of architecture creation and refinement |
| B. | An ADL must provide the ability to provide structures of the system |
| C. | An ADL must support either an analytical capability based on architecture description |
| D. | All of the mentioned |
| Answer» E. | |
| 31. |
What model does MVC evolves to? |
| A. | Arch Model |
| B. | Slinky Model |
| C. | PAC Model |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 32. |
What is the problem for ht developer in using unit operation? |
| A. | Understanding the requirements |
| B. | Mapping the requirements to a structural solution |
| C. | Identifying and resolving conflicting structural solution |
| D. | All of the mentioned |
| Answer» E. | |
| 33. |
What is MVC’s main guard against change? |
| A. | Part Whole Decomposition |
| B. | Layering- placing different classes of functionality into distinct layers |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» B. Layering- placing different classes of functionality into distinct layers | |
| 34. |
Which of the Entries are possible for Phase? |
| A. | Coarse, Medium and Fine |
| B. | Early, Middle and Post deployment |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» C. All of the mentioned | |
| 35. |
Which of the following are functionality related issues that are important to examine? |
| A. | Making sure that there are written requirements in all key areas |
| B. | Checking that system acceptance criteria exist |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 36. |
Which of the following is role of Timeline Synchronizer? |
| A. | It is the base scheduling mechanism for all air vehicle model |
| B. | It is used to orchestrate all a-periodic processing performed by subsystem |
| C. | It is used to conduct all periodic processing performed by the simulations subsystem |
| D. | None of the mentioned |
| Answer» B. It is used to orchestrate all a-periodic processing performed by subsystem | |
| 37. |
Which of the following are considered for the architecture on development? |
| A. | Teams are allocated once the architecture under construction has been agreed upon |
| B. | Teams are allocated after the architecture under construction has been agreed upon |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» B. Teams are allocated after the architecture under construction has been agreed upon | |
| 38. |
Which of the following can be considered as stakeholders? |
| A. | End User |
| B. | System Administrator |
| C. | The developer |
| D. | All of the mentioned |
| Answer» E. | |
| 39. |
Which of the following steps are followed for the Overview of SAAM? |
| A. | Develop Scenarios |
| B. | Describe Candidate Architecture |
| C. | Classify Scenarios |
| D. | All of the mentioned |
| Answer» E. | |
| 40. |
How does a use of template allowed in components simplify things? |
| A. | Reliability is enhanced |
| B. | Coding time is increased |
| C. | Testing is more complexed |
| D. | All of the mentioned |
| Answer» B. Coding time is increased | |
| 41. |
How is reliability enhanced when a template is allowed in component? |
| A. | Once the template is incorrect, then templatized portion of every using component is correct |
| B. | Once the template is correct, then templatized portion of every using component is correct |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» C. All of the mentioned | |
| 42. |
What does a review practice includes? |
| A. | Review team |
| B. | Organizational Expectation |
| C. | Review Preparation |
| D. | All of the mentioned |
| Answer» E. | |
| 43. |
Which of the following are the advantages for application generators? |
| A. | Generating code faster |
| B. | Cheap and more reliable code |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 44. |
Which of the following is application generator? |
| A. | Compiler |
| B. | Debugger |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» B. Debugger | |
| 45. |
Which of the following is not a part of assets of product line? |
| A. | Project planning |
| B. | Exemplar systems |
| C. | Defect elimination |
| D. | None of the mentioned |
| Answer» E. | |
| 46. |
Which of the following are considered for connectors? |
| A. | Connectors transfers data bidirectionally |
| B. | Connectors connect two component of type procedure |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 47. |
What is true for the Organizations? |
| A. | Organizations always add specialized groups that are independent of architectural structures |
| B. | Organizations sometimes add specialized groups that are independent of architectural structures |
| C. | Organizations sometimes add specialized groups that are dependent of architectural structures |
| D. | None of the mentioned |
| Answer» C. Organizations sometimes add specialized groups that are dependent of architectural structures | |
| 48. |
For what purpose Profiling is used? |
| A. | To determine the static data relationships among components |
| B. | To determine the execution behavior of the system |
| C. | To extract software relationship |
| D. | All of the mentioned |
| Answer» C. To extract software relationship | |
| 49. |
How is Flexibility enhanced when a template is allowed in the component? |
| A. | Conforming components are largely interchangeable |
| B. | Conforming components are not largely interchangeable |
| C. | All of the mentioned |
| D. | None of the mentioned |
| Answer» B. Conforming components are not largely interchangeable | |
| 50. |
What are the steps involved in Financial management system? |
| A. | choosing Scenarios And Achieving Deep understanding |
| B. | Scenario Selection Process |
| C. | Observation on the scenario selection process |
| D. | All of the mentioned |
| Answer» E. | |