What is the flux of a membrane filter if it contains 75 sq. ft. of fi – McqOptions

MCQOPTIONS

1.	What is the flux of a membrane filter if it contains 75 sq. ft. of filter area and operates for 24 hours at a flow rate of 5 gpm? Assume that the water temperature is 20℃.
A.	100 gallons per square foot per day
B.	98 gallons per square foot per day
C.	76 gallons per square foot per day
D.	59 gallons per square foot per day
Answer» C. 76 gallons per square foot per day

Discussion

No Comment Found

Related MCQs

For surface water system, the required residual disinfectant concentration may not be less than _______ mg/L for more than ___________ hours before the first customer.
Which of the following mechanisms is not used by a membrane filter to remove particulate material from the water?
Chlorines, acids, and bases are three types of chemicals used to do which of the following?
Which of the following is a valid name for a test for testing membrane integrity?
A raw water reservoir would be an example of which membrane pretreatment method (where the goal is to reduce the loading and fouling potential of the water fed to the membrane)?
Which of the following are different forms of membrane filter construction?I) Hollow filterII) TMPIII) Spiral woundIV) CeramicV) Cross flowVI) Electro dialysis
Which of the following remains the primary use of membrane filtration in water treatment?
The filtered water that has been treated by a membrane filter is called _____________
Which one of the following is the name of the process of reversing the direction of water flow through the filter using filtered water?
The flow rate through the membrane filter itself expressed as a gallon per square foot per day is called?