A steel rod of sectional area 250 sq. mm connects two parallel walls 5 – McqOptions

MCQOPTIONS

1.	A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the tensile force developed at a temperature of 50°C, is
A.	80 N/mm2
B.	100 N/mm2
C.	120 N/mm2
D.	150 N/mm2
Answer» D. 150 N/mm2

Discussion

No Comment Found

Related MCQs

For the close coil helical spring of the maximum deflection is
At yield point of a test piece, the material
The ratio of shear stress and shear strain of an elastic material, is
The ratio of moments of inertia of a triangular section about its base and about a centroidal axis parallel to its base, is
The ratio of the length and diameter of a simply supported uniform circular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span, is
The ratio of the deflections of the free end of a cantilever due to an isolated load at 1/3rd and 2/3rd of the span, is
The stiffness of the close coil helical spring is
In case of a simply supported rectangular beam of span L and loaded with a central load W, the length of elasto-plastic zone of the plastic hinge, is
In plastic analysis, the shape factor for a circular section, is
Flat spiral springs