MCQOPTIONS
Saved Bookmarks
This section includes 14 Mcqs, each offering curated multiple-choice questions to sharpen your Highway Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
The guide posts are usually of height? |
| A. | 0.6m |
| B. | 0.7m |
| C. | 0.8m |
| D. | 2.0m |
| Answer» D. 2.0m | |
| 2. |
The indicators that may be marked for visible outline of the road is called __________ |
| A. | Roadway indicator |
| B. | Roadway delineator |
| C. | Roadway line |
| D. | Roadway markings |
| Answer» C. Roadway line | |
| 3. |
On a 2 phase road, the saturation flow on road A is 1000 and normal flow is 250,whereas on road B the saturation flow is 1500 and normal flow is 500,the total red time is 10 sec, find optimum cycle length. |
| A. | 35sec |
| B. | 36sec |
| C. | 37sec |
| D. | 38sec |
| Answer» D. 38sec | |
| 4. |
Which of the traffic signal method is based on saturation flow? |
| A. | Trial cycle method |
| B. | Webster method |
| C. | IRC method |
| D. | Approximate method |
| Answer» C. IRC method | |
| 5. |
If the amber time at a signal is 3 sec and the green signal time is 25sec, find the red signal time? |
| A. | 22sec |
| B. | 21sec |
| C. | 28sec |
| D. | 29sec |
| Answer» D. 29sec | |
| 6. |
There is a traffic flow of 250 vehicles on road A and 200 vehicles on road B, if the green signal time on road A is 15 sec, then the green signal time of road B is? |
| A. | 10sec |
| B. | 11sec |
| C. | 12sec |
| D. | 13sec |
| Answer» C. 12sec | |
| 7. |
In approximate method of signals, the average time taken to cross by the pedestrian is? |
| A. | 4sec |
| B. | 5sec |
| C. | 6sec |
| D. | 7sec |
| Answer» E. | |
| 8. |
If the number of cycles in trial cycle method is 20, for traffic of 170 on one road and 160 on other road, then calculate the total green time in sec. |
| A. | 38 |
| B. | 39 |
| C. | 40 |
| D. | 41 |
| Answer» E. | |
| 9. |
The number of cycles for a trial period of 45 sec is? |
| A. | 20 |
| B. | 22 |
| C. | 25 |
| D. | 30 |
| Answer» B. 22 | |
| 10. |
In trial cycle method, the average time headway is assumed as __________ |
| A. | 2sec |
| B. | 2.5sec |
| C. | 3sec |
| D. | 3.5sec |
| Answer» C. 3sec | |
| 11. |
The clearance time for amber is usually __________ |
| A. | 0.5sec |
| B. | 1sec |
| C. | 1.5sec |
| D. | 3sec |
| Answer» E. | |
| 12. |
The traffic signals that are installed for pedestrians are called __________ |
| A. | Traffic control signals |
| B. | Pedestrian signals |
| C. | Special traffic signals |
| D. | Automatic signals |
| Answer» C. Special traffic signals | |
| 13. |
One of the disadvantages of traffic signals is? |
| A. | Provide orderly moment at intersection |
| B. | The quality of the traffic flow improves |
| C. | Traffic handling capacity increases |
| D. | The rear end collision increases |
| Answer» E. | |
| 14. |
To reduce the conflict points which method is preferable? |
| A. | Restricting the entry in one side |
| B. | Widening of the roads |
| C. | Use of traffic signals |
| D. | Diverting the traffic |
| Answer» D. Diverting the traffic | |