For a 2 port network, the transmission parameters are given as 10, 9, 11 and 10 corresponds to A, B, C and D. The correct statement among the following is?

Network satisfies only reciprocity

Network satisfies both reciprocity and symmetry

Network satisfies only reciprocity

Network satisfies only symmetry

Network satisfies neither reciprocity nor symmetry

The relation AD – BC = 1, (where A, B, C and D are the elements of a transmission matrix of a network) is valid for ___________

Both active and passive networks

Passive but not reciprocal networks

Passive and reciprocal networks

Two networks are connected in series parallel connection. Then, the forward short-circuit current gain of the network is ____________

Product of Z-parameter matrices

Product of h-parameter matrices

14 + Mcqs in Series Series Connection Two Port Network in Network Theory Page 1 McqOptions

1.	In the circuit given below, the maximum power that can be transferred to the resistor RL is _____________
A.	1 W
B.	10 W
C.	0.25 W
D.	0.5 W
Answer» D. 0.5 W

Discussion

2.	In the figure given below, the pole-zero plot corresponds to _____________
A.	Low-pass filter
B.	High-pass filter
C.	Band-pass filter
D.	Notch filter
Answer» E.

Discussion

3.	In the circuit given below, the equivalent inductance is ____________
A.	L1 + L2 – 2M
B.	L1 + L2 + 2M
C.	L1 + L2 – M
D.	L1 + L2
Answer» B. L1 + L2 + 2M

Discussion

4.	A moving coil of a meter has 250 turns and a length and depth of 40 mm and 30 mm respectively. It is positioned in a uniform radial flux density of 450 mT. The coil carries a current of 160 mA. The torque on the coil is?
A.	0.0216 N-m
B.	0.0456 N-m
C.	0.1448 N-m
D.	1 N-m
Answer» B. 0.0456 N-m

Discussion

5.	In the circuit given below, the number of node and branches are ______________
A.	4 and 5
B.	4 and 6
C.	5 and 6
D.	6 and 4
Answer» C. 5 and 6

Discussion

6.	In the circuit given below, the 60 V source absorbs power. Then the value of the current source is ____________
A.	10 A
B.	13 A
C.	15 A
D.	18 A
Answer» B. 13 A

Discussion

7.	For a 2 port network, the transmission parameters are given as 10, 9, 11 and 10 corresponds to A, B, C and D. The correct statement among the following is?
A.	Network satisfies both reciprocity and symmetry
B.	Network satisfies only reciprocity
C.	Network satisfies only symmetry
D.	Network satisfies neither reciprocity nor symmetry
Answer» B. Network satisfies only reciprocity

Discussion

8.	The relation AD – BC = 1, (where A, B, C and D are the elements of a transmission matrix of a network) is valid for ___________
A.	Both active and passive networks
B.	Passive but not reciprocal networks
C.	Active and reciprocal networks
D.	Passive and reciprocal networks
Answer» E.

Discussion

9.	The condition for a 2port network to be reciprocal is ______________
A.	Z11 = Z22
B.	BC – AD = -1
C.	Y12 = -Y21
D.	h12 = h21
Answer» C. Y12 = -Y21

Discussion

10.	Two networks are connected in series parallel connection. Then, the forward short-circuit current gain of the network is ____________
A.	Product of Z-parameter matrices
B.	Sum of h-parameter matrices
C.	Sum of Z-parameter matrices
D.	Product of h-parameter matrices
Answer» C. Sum of Z-parameter matrices

Discussion

11.	How many incandescent lamps connected in series would consume the same total power as a single 100 W/220 V incandescent lamp. The rating of each lamp is 200 W/220 V?
A.	Not possible
B.	4
C.	3
D.	2
Answer» E.

Discussion

12.	In the circuit given below, the current through the 2 kΩ resistance is _____________
A.	Zero
B.	1 mA
C.	2 mA
D.	6 mA
Answer» B. 1 mA

Discussion

13.	In the circuit given below, the number of chords in the graph is ________________
A.	3
B.	4
C.	5
D.	6
Answer» C. 5

Discussion

14.	In the circuit given below, the value of R is ___________
A.	2.5 Ω
B.	5.0 Ω
C.	7.5 Ω
D.	10.0 Ω
Answer» D. 10.0 Ω

Discussion

Explore topic-wise MCQs in Network Theory.

In the circuit given below, the maximum power that can be transferred to the resistor RL is _____________

In the figure given below, the pole-zero plot corresponds to _____________

In the circuit given below, the equivalent inductance is ____________

A moving coil of a meter has 250 turns and a length and depth of 40 mm and 30 mm respectively. It is positioned in a uniform radial flux density of 450 mT. The coil carries a current of 160 mA. The torque on the coil is?

In the circuit given below, the number of node and branches are ______________

In the circuit given below, the 60 V source absorbs power. Then the value of the current source is ____________

For a 2 port network, the transmission parameters are given as 10, 9, 11 and 10 corresponds to A, B, C and D. The correct statement among the following is?

The relation AD – BC = 1, (where A, B, C and D are the elements of a transmission matrix of a network) is valid for ___________

The condition for a 2port network to be reciprocal is ______________

Two networks are connected in series parallel connection. Then, the forward short-circuit current gain of the network is ____________

How many incandescent lamps connected in series would consume the same total power as a single 100 W/220 V incandescent lamp. The rating of each lamp is 200 W/220 V?

In the circuit given below, the current through the 2 kΩ resistance is _____________

In the circuit given below, the number of chords in the graph is ________________

In the circuit given below, the value of R is ___________