The condition for a 2port network to be reciprocal is ______________ – McqOptions

MCQOPTIONS

1.	The condition for a 2port network to be reciprocal is ______________
A.	Z11 = Z22
B.	BC – AD = -1
C.	Y12 = -Y21
D.	h12 = h21
Answer» C. Y12 = -Y21

Discussion

No Comment Found

Related MCQs

In the circuit given below, the maximum power that can be transferred to the resistor RL is _____________
In the figure given below, the pole-zero plot corresponds to _____________
In the circuit given below, the equivalent inductance is ____________
A moving coil of a meter has 250 turns and a length and depth of 40 mm and 30 mm respectively. It is positioned in a uniform radial flux density of 450 mT. The coil carries a current of 160 mA. The torque on the coil is?
In the circuit given below, the number of node and branches are ______________
In the circuit given below, the 60 V source absorbs power. Then the value of the current source is ____________
For a 2 port network, the transmission parameters are given as 10, 9, 11 and 10 corresponds to A, B, C and D. The correct statement among the following is?
The relation AD – BC = 1, (where A, B, C and D are the elements of a transmission matrix of a network) is valid for ___________
The condition for a 2port network to be reciprocal is ______________
Two networks are connected in series parallel connection. Then, the forward short-circuit current gain of the network is ____________