Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

Cost of nuclear fuel in nuclear power plant economics is considered as

A. running cost
B. maintenance cost
C. capital cost
D. development cost
Answer» D. development cost
2.

Operating cost of nuclear power plant is less than thermal power plant.

A. true
B. false
Answer» B. false
3.

Absorption of radioactive element by human, affects their offspring’s.

A. true
B. false
Answer» B. false
4.

A spring that shoots jets of hot water and steam into the air is called as

A. mine hole
B. geyser
C. hot spring
D. mud pot
Answer» C. hot spring
5.

How many percentage of fissionable U-235

A. 0.1%
B. 0.5%
C. 0.7%
D. 1.5%
Answer» D. 1.5%
6.

The pressure at the inlet or exit of the draft tube should not be

A. less than one third of atmospheric pressure
B. greater than one third of atmospheric pressure
C. less than one atmospheric pressure
D. greater than one atmospheric pressure
Answer» B. greater than one third of atmospheric pressure
7.

GCFBR stands for

A. gas conditioned fast breeder reactor
B. gas cooled fast breeder reactor
C. gas conditioned fast boiling reactor
D. gas cooled fast breeder reactor
Answer» C. gas conditioned fast boiling reactor
8.

The land area required for installation of nuclear power plant is

A. more than thermal power plant
B. less than thermal power plant
C. equel to thermal power plant
D. depends on type of construction
Answer» D. depends on type of construction
9.

U238 will undergo fission by

A. igh energy (fast) neutrons alone
B. ow energy (slow) neutrons alone
C. ither fast or slow neutrons
D. edium energy neutrons
Answer» B. ow energy (slow) neutrons alone
10.

U235 will undergo fission by

A. igh energy (fast) neutrons alone
B. ow energy (slow) neutrons alone
C. ither fast or slow neutrons
D. edium energy neutrons
Answer» D. edium energy neutrons
11.

Plutonium is produced

A. s basic raw material
B. y neutron irradiation of Uz
C. y neutron irradiation of thorium
D. rtificially
Answer» C. y neutron irradiation of thorium
12.

Reflector in nuclear plants is used to

A. eturn the neutrons back into the core
B. hield the radioactivity completely
C. heck pollution
D. onserve energy
Answer» B. hield the radioactivity completely
13.

A nuclear fission produces energy of following order in MeV

A. 0
B. 00
C. 000
D. 0,000
Answer» C. 000
14.

The control rods in the control system of nuclear reactors are used to

A. Absorb excess neutrons
B. Control fuel consumption
C. Control temperature
D. All of these
Answer» B. Control fuel consumption
15.

Amongst the following, the fissionable materials are

A. U₂₃₃ and Pu₂₂₉
B. U₂₃₁ and Pu₂₃₃
C. U₂₃₅ and Pu₂₃₅
D. U₂₃₈ and Pu₂₃₉
Answer» B. U₂₃₁ and Pu₂₃₃
16.

Gas cooled reactor uses following materials as moderator, and coolant

A. Graphite, CO2
B. Graphite, air
C. Heavy water, CO2
D. Lead, H2
Answer» B. Graphite, air
17.

Boiling water reactor uses the following as moderator, coolant and working fluid

A. Ordinary fluid
B. Heavy water
C. Molten lead
D. Hydrogen gas
Answer» B. Heavy water
18.

Isotopes of same elements have

A. Same atomic number and different masses
B. Same chemical properties but different atomic numbers
C. Different masses and different atomic numbers
D. Different chemical properties and same atomic numbers
Answer» C. Different masses and different atomic numbers
19.

For economical operation of a nuclear plant

A. Used fuel should be reprocessed
B. Moderator should be used
C. Coolant should be employed
D. Control rods should be used
Answer» B. Moderator should be used
20.

A moderator, apart from its high neutron slowing power, and low non-productive neutron, should be

A. Stable under nuclear radiation
B. Corrosion resistant
C. Good thermal conductor
D. All of these
Answer» E.
21.

Which of the following are ferrite materials?

A. U₂₃₃ and Pu₂₃₉
B. U
C. U₂₃₈ and Pu₂₃₉
D. U₂₃₈ and Th₂₃₉
Answer» C. U₂₃₈ and Pu₂₃₉
22.

Which of the following is more appropriate for a moderator? One which

A. Does not absorb neutrons
B. Absorbs neutrons
C. Accelerates neutrons
D. Eats up neutrons
Answer» B. Absorbs neutrons
23.

Which of the following nuclear reactor does not need a heat exchanger for generation of steam?

A. Gas cooled
B. Liquid metal cooled
C. Pressurised water
D. Boiling water
Answer» E.
24.

In order to have constant chain reaction to produce a constant rate of heat output, the value of ratio of the number of neutrons in one generation to the number of neutrons in the immediately preceding generation must be

A. Greater than 1.0
B. Less than 1.0
C. Equal to zero
D. Equal to 1.0
Answer» E.
25.

Fast breeder reactor uses

A. Boiler
B. Direct cycle of coolant system
C. Double circuit system of coolant cycle
D. Multi passes system
Answer» D. Multi passes system
26.

A fast breeder reactor uses

A. 90% U₂₃₅
B. U₂₃₈
C. U₂₃₅
D. Pu₂₃₉
Answer» B. U₂₃₈
27.

A power plant giving least running cost of production of electrical power is

A. Steam power plant
B. Gas turbine power plant
C. Hydro electric power plant
D. Nuclear power plant
Answer» E.
28.

The fuel needed, with reflector in nuclear power plant, in order to generate sufficient neutrons to sustain a chain reaction, would be

A. More
B. Less
C. Same
D. Zero
Answer» C. Same
29.

Effective moderators are those materials which contain

A. Light weight atoms
B. Heavy weight atoms
C. Critical atoms
D. Zero weight atoms
Answer» B. Heavy weight atoms
30.

The efficiency of a nuclear power plant in comparison to a conventional thermal power plant is

A. Same
B. More
C. Less
D. May be less or mote depending on size
Answer» D. May be less or mote depending on size
31.

Pressurized water reactor is designed

A. For boiling pi water in the core
B. To use liquid sodium metal as coolant
C. To use intermediate coolant
D. To prevent the water coolant from boiling in the core
Answer» E.
32.

A moderator

A. Absorbs neutrons
B. Does not absorb neutrons
C. Accelerates neutrons
D. None of these
Answer» C. Accelerates neutrons
33.

The coolant used in boiling water reactor is

A. CO2
B. Pressurised water
C. Mixture of water and steam
D. Liquid metal
Answer» D. Liquid metal
34.

A nuclear reactor is said to be critical when the neutron population in the reactor core is

A. Rapidly increasing leading to the point of explosion
B. Decreasing from the specified value
C. Reduced to zero
D. Constant
Answer» E.
35.

In triggering fission, which types of neutrons are more effective?

A. Fast
B. Slow
C. In bulk
D. Static
Answer» C. In bulk
36.

Enriched uranium is required as a fuel in a nuclear reactor, if light water is used as moderator and coolant, because light water has

A. High neutron absorption cross-section
B. Low moderating efficiency
C. High neutron scatter cross-section
D. Low neutron absorption cross-section
Answer» C. High neutron scatter cross-section
37.

Each fission of U₂₃₅ produces on the average _________ fast neutrons as a product of reaction.

A. 2.46
B. 24.6
C. 246
D. 2460
Answer» B. 24.6
38.

One gram of uranium will produce energy equivalent to approximately

A. 1 tonne of high grade coal
B. 4.5 tonnes of high grade coal
C. 10 tonnes of high grade coal
D. 100 tonnes of high grade coal
Answer» C. 10 tonnes of high grade coal
39.

The unit of radioactivity is

A. Electron volt
B. Electron ampere
C. Curie
D. MV
Answer» D. MV
40.

Reflector in nuclear power plants _________ neutron leakage.

A. Increases
B. Decreases
C. Have no effect on
D. None of these
Answer» C. Have no effect on
41.

A moderator, in nuclear power plants, is a medium introduced into the fuel mass in order to

A. Slow down the speed of fast moving neutrons
B. Control the reaction
C. Reduce the temperature
D. Extracts heat from nuclear reaction
Answer» B. Control the reaction
42.

Which of the following particles is the lightest?

A. Nucleus
B. Electron
C. Proton
D. Meson
Answer» C. Proton
43.

Which of the following is the heaviest?

A. Neutron
B. Proton
C. Atom
D. Electron
Answer» D. Electron
44.

The material most commonly used for shielding is

A. Carbon
B. Lead
C. Concrete
D. All of these
Answer» D. All of these
45.

The commonly used material for shielding is

A. Lead or concrete
B. Lead and tin
C. Graphite or cadmium
D. Thick galvanized sheets
Answer» B. Lead and tin
46.

In nuclear fission each neutron that causes fission releases

A. No new neutron
B. At least one new neutron
C. One new neutron
D. More than one new neutron
Answer» E.
47.

The most practical fuel for a thermonuclear reactor, both from economical and nuclear consideration is

A. Plutonium
B. Uranium
C. Deuterium
D. Thorium
Answer» D. Thorium
48.

A nuclear fission is initiated when the critical energy as compared to neutron binding energy of the atoms is

A. Same
B. More
C. Less
D. There is no such criterion
Answer» C. Less
49.

The predominant isotope of the naturally occurring element is

A. U₂₃₅
B. U₂₃₈
C. Pu₂₃₃
D. Pu₂₃₉
Answer» C. Pu₂₃₃
50.

The process by which a heavy nucleus is spitted into two light nuclei is known as

A. Splitting
B. Fission
C. Fusion
D. Disintegration
Answer» C. Fusion