MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
…………………..is the earliest time an activity can begin |
| A. | eft |
| B. | lst |
| C. | lft |
| D. | est |
| Answer» E. | |
| 2. |
Activities that can be accomplished simultaneously are called……………activities. |
| A. | critical |
| B. | preceding |
| C. | succeeding |
| D. | concurrent |
| Answer» E. | |
| 3. |
Activities that cannot be started until one or more of other activities arecompleted but immediately follow are called………………….. |
| A. | critical |
| B. | preceding |
| C. | succeeding |
| D. | concurrent |
| Answer» D. concurrent | |
| 4. |
……………are activities that must be completed immediately prior to the start ofanother activity. |
| A. | critical |
| B. | preceding |
| C. | succeeding |
| D. | concurrent |
| Answer» C. succeeding | |
| 5. |
Activities lying on the critical path are known as……………………..activities. |
| A. | critical |
| B. | preceding |
| C. | succeeding |
| D. | concurrent |
| Answer» B. preceding | |
| 6. |
Critical path is the longest ………………………….in the network |
| A. | slack |
| B. | activity |
| C. | event |
| D. | path |
| Answer» E. | |
| 7. |
……is the unbroken chain of activities from start event to end event in thenetwork diagram. |
| A. | slack |
| B. | activity |
| C. | network |
| D. | path |
| Answer» E. | |
| 8. |
Node represents………………………… |
| A. | slack |
| B. | activity |
| C. | network |
| D. | event |
| Answer» E. | |
| 9. |
…………………….represents the start and end of an activity. |
| A. | event |
| B. | activity |
| C. | network |
| D. | slack |
| Answer» B. activity | |
| 10. |
The element of job to be completed in a specific time is known as………………………. |
| A. | event |
| B. | activity |
| C. | network |
| D. | slack |
| Answer» C. network | |
| 11. |
……………………….represents the activities and events of a project in a logicalsequence. |
| A. | network diagram |
| B. | project graph |
| C. | arrow diagram |
| D. | all of these |
| Answer» B. project graph | |
| 12. |
………………………analysis is a technique commonly used to assess expected productprofitability. |
| A. | pert |
| B. | cpm |
| C. | bep |
| D. | swot |
| Answer» D. swot | |
| 13. |
A series of related activities which result in some product or service is called…… |
| A. | event |
| B. | task |
| C. | network |
| D. | slack |
| Answer» D. slack | |
| 14. |
………………………… is a network technique of scheduling and controlling theproject where activity times cannot be precisely estimated. |
| A. | pert |
| B. | cpm |
| C. | bep |
| D. | swot |
| Answer» B. cpm | |
| 15. |
……………………….. is the difference between sales and variable cost. |
| A. | margin of safety |
| B. | fixed cost |
| C. | contribution |
| D. | profit |
| Answer» D. profit | |
| 16. |
……………………….. Analysis is one of the most popular techniques used forplanning, scheduling, monitoring and co-ordinating projects comprising a number of activities. |
| A. | network |
| B. | financial |
| C. | techno-economic |
| D. | input |
| Answer» B. financial | |
| 17. |
The term ……………………………… refers to the plan for a particular type of building,arrangement of machinery and equipment and provision of facilitation in the building. |
| A. | factory building |
| B. | factory design |
| C. | factory layout |
| D. | factory premises |
| Answer» C. factory layout | |
| 18. |
……………………………… technology refers to that technology which is suitable tolocal, economic, social and cultural conditions. |
| A. | indigenous |
| B. | imported |
| C. | advanced |
| D. | appropriate |
| Answer» E. | |
| 19. |
………………………………. Analysis is primarily concerned with the identification,quantification and evaluation of project resources. |
| A. | network |
| B. | financial |
| C. | techno-economic |
| D. | input |
| Answer» E. | |
| 20. |
………………………………analysis is done to ascertain financial viability of a project. |
| A. | network |
| B. | financial |
| C. | techno-economic |
| D. | input |
| Answer» C. techno-economic | |
| 21. |
Project formulation means ……………………………….. Study. |
| A. | profitability |
| B. | liquidity |
| C. | feasibility |
| D. | viability |
| Answer» D. viability | |
| 22. |
SWOT stands for strength, weakness, opportunity, and ……………………………….. |
| A. | treat |
| B. | threat |
| C. | tort |
| D. | none |
| Answer» C. tort | |
| 23. |
After screening the ideas, they are translated into project…………………………………. |
| A. | portfolio |
| B. | profiles |
| C. | proposal |
| D. | none |
| Answer» C. proposal | |
| 24. |
The process of evaluating the project ideas with a view to select the best and promising idea after eliminating the unprofitable ideas is called………………………..Of the project ideas. |
| A. | screening |
| B. | appraisal |
| C. | identification |
| D. | none |
| Answer» B. appraisal | |
| 25. |
………………………………. the process of collection, compilation and analysis of economic data for the purpose of finding out possible opportunities forinvestment. |
| A. | project screening |
| B. | project appraisal |
| C. | project identification |
| D. | none |
| Answer» D. none | |
| 26. |
………………refers to any investment opportunity which is to be exploited for profit. |
| A. | product |
| B. | project |
| C. | share |
| D. | none of these |
| Answer» C. share | |
| 27. |
The Head Office of KINFRA is located at……………………… |
| A. | thiruvananthapuram |
| B. | kozhikode |
| C. | ernakulum |
| D. | kannur |
| Answer» B. kozhikode | |
| 28. |
Which of these is not a state level promotional institutions |
| A. | kitco |
| B. | ksidc |
| C. | niesbud |
| D. | sidco |
| Answer» D. sidco | |
| 29. |
…………………… is an area where applied research on high tech projects isconducted |
| A. | step |
| B. | swot |
| C. | epst |
| D. | none of these |
| Answer» B. swot | |
| 30. |
…………………… provides consultancy services to small and medium enterprises atreasonable cost |
| A. | naye |
| B. | tco |
| C. | sido |
| D. | nsic |
| Answer» C. sido | |
| 31. |
KITCO was established in ……………… |
| A. | 1970 |
| B. | 1973 |
| C. | 1972 |
| D. | 1975 |
| Answer» D. 1975 | |
| 32. |
……………. Is a National level apex organization of young entrepreneurs |
| A. | naye |
| B. | tco |
| C. | sido |
| D. | nsic |
| Answer» B. tco | |
| 33. |
Techno crafts is assistance is provided by……………………….. |
| A. | kfc |
| B. | kitco |
| C. | ksidc |
| D. | kinfra |
| Answer» B. kitco | |
| 34. |
KINFRA was setup in ……………………. |
| A. | 2000 |
| B. | 1993 |
| C. | 1996 |
| D. | 1999 |
| Answer» C. 1996 | |
| 35. |
Offering single window clearance facility is the most fascinating feature of ……… |
| A. | ksidc |
| B. | kitco |
| C. | dic |
| D. | kinfra |
| Answer» D. kinfra | |
| 36. |
The advance given to cover the finance requirement during the time lag betweenthe sanctioning and disbursement of term loan by financial institutions is known as………….. |
| A. | soft loan. |
| B. | seed capital. |
| C. | capital subsidy. |
| D. | bridge loan. |
| Answer» E. | |
| 37. |
The MSME Development Act came into force in the year………………………………. |
| A. | 2005. |
| B. | 2006. |
| C. | 2007. |
| D. | none of these. |
| Answer» C. 2007. | |
| 38. |
Single window scheme is instituted through………………………… |
| A. | idbi. |
| B. | sidco. |
| C. | kfc. |
| D. | dic. |
| Answer» E. | |
| 39. |
A bonus or financial aid which is given by a govt. to an industry to help itcompete with other units in home market or in a foreign market is known as…… |
| A. | subsidy. |
| B. | concession. |
| C. | bounties. |
| D. | none of these. |
| Answer» D. none of these. | |
| 40. |
The investment in plant and machinery in ancillary units should not exceed……… |
| A. | rs.25 lakhs. |
| B. | 2 crores. |
| C. | 5 crores. |
| D. | 10 crores. |
| Answer» D. 10 crores. | |
| 41. |
A single lump sum which is given by a govt. to an entrepreneur to cover the costis known as……. |
| A. | subsidy. |
| B. | concession. |
| C. | bounties. |
| D. | none of these. |
| Answer» B. concession. | |
| 42. |
A small service enterprise is one in which the investment in plant and machinerydoes not exceed……………………. |
| A. | rs. 25 lakhs. |
| B. | 1 crore. |
| C. | 2 crores. |
| D. | none of these. |
| Answer» D. none of these. | |
| 43. |
A micro service is one in which the investment in plant and machinery does notexceed……….. |
| A. | rs. 5 lakhs. |
| B. | rs.10 lakhs. |
| C. | rs 25 lakhs. |
| D. | none of these. |
| Answer» C. rs 25 lakhs. | |
| 44. |
A micro manufacturing enterprise is one in which the investment in plant andmachinery does not exceed……………………. |
| A. | rs. 5 lakhs. |
| B. | rs. 10 lakhs. |
| C. | rs.20 lakhs. |
| D. | none of these. |
| Answer» E. | |
| 45. |
……………………… offers comprehensive consultancy services to MSMEs in Kerala. |
| A. | ksidc |
| B. | kitco |
| C. | dic |
| D. | kinfra |
| Answer» C. dic | |
| 46. |
KITCO was set up in……………………… |
| A. | 1973 |
| B. | 1971 |
| C. | 1972 |
| D. | 1970 |
| Answer» D. 1970 | |
| 47. |
Under the single roof of the ………………………all the services and support requiredby small and village entrepreneurs are provided. |
| A. | ksidc |
| B. | kitco |
| C. | dic |
| D. | kinfra |
| Answer» D. kinfra | |
| 48. |
The initial capital that is required to obtain loans from the financial institutionsis called …………… |
| A. | seed capital |
| B. | incentive |
| C. | subsidy |
| D. | none of these |
| Answer» B. incentive | |
| 49. |
………………………………….is the place where the required facilities and factoryaccommodation are provided by the government to the entrepreneurs to establish their industries there. |
| A. | industry |
| B. | industrial estate |
| C. | company |
| D. | none of these |
| Answer» C. company | |
| 50. |
………………………………. Is the financial and promotional assistance provided by the Govt. to the industries for boosting up industrial development in all regionsparticularly in backward areas. |
| A. | seed capital |
| B. | incentive |
| C. | subsidy |
| D. | none of these |
| Answer» C. subsidy | |