Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

Divergence Theorem relates ________ integral to __________ integral.

A. surface, volume
B. line, surface
C. volume, line
D. all of these
Answer» B. line, surface
2.

________ are very efficient in a frequency range of 3-300 GHz.

A. Transmission line
B. Wave guides
C. Both (a) and (b)
D. None of these
Answer» C. Both (a) and (b)
3.

Ampere's Circuital Law can be applied __________ the conductor.

A. Inside
B. Outside
C. Both (a) and (b)
D. None of these
Answer» D. None of these
4.

If the rate at which field lines enter into a small volume and alsoleave, then divergence is ________.

A.
B. 1
C. −1
Answer» D.
5.

Conduction current through a wire is __________ displacementcurrent in capacitor.

A. Same as
B. Different from
C. Twice of
D. None of these
Answer» B. Different from
6.

In a microstrip line, there is _________metal strip over the substrate.

A. A thin
B. A thick
C. No
D. None of these
Answer» B. A thick
7.

Voltage applied across a ceramic dielectric produces an electrolytic field 100 times greater than air. What will be the value of dielectric constant?

A. 50
B. 100
C. 150
D. 200
Answer» C. 150
8.

Transmission lines facilitate _________propagation of energy.

A. Guided
B. Unguided
C. None of these
D. Cannot say
Answer» B. Unguided
9.

Spherical coordinates are represented in terms of ___________.

A. (r, φ, z)
B. (r, θ, φ)
C. (x, y, z)
D. all of these
Answer» C. (x, y, z)
10.

Electric dipole is a pair of __________ and __________ point charges.

A. Equal and same
B. Unequal and same
C. Equal and opposite
D. Unequal and opposite
Answer» D. Unequal and opposite
11.

The capacity of capacitor bank used in power factor correction isexpressed in terms of

A. kW
B. kVA
C. kVAR
D. volts
Answer» D. volts
12.

For which of the following parameter variation, the capacitance of the capacitor remains unaffected?

A. Distance between plates
B. Area of the plates
C. Nature of dielectric
D. Thickness of the plates
Answer» E.
13.

________ of two vectors uses the Law of Parallelogram.

A. multiplication
B. division
C. addition
D. all of these
Answer» D. all of these
14.

Cylindrical coordinate 'z' is related to the Cartesian coordinate as__________.

A. tan−1(y/x)
B. z
C. xy/z
D. cot z
Answer» C. xy/z
15.

The electric field intensity at a point situated at 4 meters away from a point charge 200 N/C. if the distance is reduced to 2 meters, the field intensity will be.

A. 400 N/C
B. 600 N/C
C. 800 N/C
D. 1200 N/C
Answer» D. 1200 N/C
16.

A capacitor stored 0.24 coulombs at 10 volts ,its capacitance is

A. 0.024F
B. 0.12 F
C. 0.6 F
D. 0.8 F
Answer» B. 0.12 F
17.

Potential is _________ a perfect conductor.

A. same inside
B. infinite inside
C. zero inside
D. none of these
Answer» B. infinite inside
18.

Dipole moment is _________ a right-hand screw, when it is moved inthe current's direction in a current loop.

A. orthogonal to the direction of
B. opposite to the direction of
C. in the direction of
D. none of these
Answer» D. none of these
19.

"The total electric flux through any closed surface surrounding charges is equal to the amount oflcharge enclosed". The above statement is associated with

A. Coulomb's square law
B. Gauss's law
C. Maxwell's first law
D. Maxwell's second law
Answer» C. Maxwell's first law
20.

Charge distribution symmetry can be of _______ type.

A. Spherical
B. Cylindrical
C. Planar
D. All of these
Answer» E.
21.

A hole of radius b (b < a) is now drilled along the length of the wire at a distance d from the center of the wire as shown below. The magnetic field inside the hole is

A. uniform and depends only on d
B. uniform and depends only on b
C. uniform and depends on both b and d
D. non uniform
Answer» D. non uniform
22.

Resonator cavities are used in _______.

A. Klystron tubes
B. Band-pass filters
C. Wave meters
D. All of these
Answer» E.
23.

_______velocity is that whose resultant repeated reflected wavestravel down the guide.

A. Medium
B. Phase
C. Group
D. None of these
Answer» D. None of these
24.

___________ product is governed by the Right-Hand Screw Rule.

A. vector
B. scalar
C. simple mathematical
D. none of these
Answer» B. scalar
25.

If antenna array elemental spacing is large, then directivity willbe__________.

A. Small
B. More
C. None of these
D. Cannot say
Answer» C. None of these
26.

The line of force due to charged particles are always

A. Always straight
B. Always curve
C. Always circle
D. None of the above
Answer» C. Always circle
27.

If A.C. voltage is applied to capacititve circuit , th alternating currentcan flow in the circuit because

A. Varying voltage produces the charging and discharging currents
B. Of high peak value
C. Discharge current can flow
D. Charging current can flow
Answer» B. Of high peak value
28.

Line integral involves _________ product.

A. scalar
B. vector
C. both (a) an (b)
D. none of these
Answer» B. vector
29.

According to __________ Law, induced current acts to produce anopposing flux.

A. Bio–Savart's
B. Lenz's
C. Ampere's
D. Faraday's
Answer» C. Ampere's
30.

Displacement current density ____________ current passingthrough a capacitor.

A. Represents
B. Does not represent
C. Is the same as
D. None of these
Answer» C. Is the same as
31.

Magnetization volume current density in magnetic materials is due to__________.

A. Applied non-uniform magnetic field
B. Non-uniform magnetic susceptibility of material
C. Both (a) and (b)
D. None of these
Answer» D. None of these
32.

Wave speed in terms of frequency f and wavelength λ is expressed as _________.

A. f/λ
B. λ/f
C. λ f
D. (λ + f)
Answer» D. (λ + f)
33.

Phase velocity is given as _________.

A. ωβ
B. βω
C. β/ω
D. None of these
Answer» D. None of these
34.

Voltage reflection coefficient is the ratio of _________ wave to_______ wave.

A. Incident, reflected
B. Reflected, incident
C. Incident, absorbed
D. Absorbed, incident
Answer» C. Incident, absorbed
35.

In good conductors, rate of attenuation is __________.

A. Small
B. Large
C. Infinity
D. Zero
Answer» D. Zero
36.

In Cylindrical coordinate systems, unit vector ar is __________.

A. directed outwards radially
B. normal to cylindrical surface at a point
C. both (a) and (b)
D. none of these
Answer» D. none of these
37.

Electric flux density________medium.

A. Depends on
B. Independent of
C. Both (a) and (b)
D. None of these
Answer» C. Both (a) and (b)
38.

Cylindrical coordinates are represented in terms of ____________.

A. (r, φ, z)
B. (r, θ, φ)
C. (x, y, z)
D. all of these
Answer» B. (r, θ, φ)
39.

Which of the following is not a vector?

A. Linear momentum
B. Angular momentum
C. Electric field
D. Electric potential
Answer» B. Angular momentum
40.

Lorentz force equation comprises __________ and __________ forces.

A. Electric, magnetic
B. Mechanical, chemical
C. Both (a) and (b)
D. None of these
Answer» B. Mechanical, chemical
41.

Wave guides ________ in DC applications.

A. Can also be used
B. Cannot be used
C. None of these
D. Cannot say
Answer» C. None of these
42.

A distortion less line has _________.

A. Non-vanishing attenuation constant
B. Constant velocity
C. Constant real characteristic impedance
D. All of these
Answer» E.
43.

Cut-off wavelength λc in the TE10 mode is ____________.

A. a
B. 2a
C. 4a
D. 8a
Answer» C. 4a
44.

In the Cylindrical coordinate system, z ranges between____________.

A. 0 and 1
B. −∞ and 0
C. 0 and −∞
D. −∞ and ∞
Answer» E.
45.

In the case of a linear material medium, _________ equation can bederived easily from Gauss' law.

A. Poisson
B. Laplace
C. Both (a) and (b)
D. None of these
Answer» D. None of these
46.

__________ gradient of magnetic scalar potential gives magnetic fieldintensity.

A. Positive
B. Negative
C. Double
D. Integral
Answer» C. Double
47.

Metals have their conductivity "σ" _________.

A. >>1
B. <<1
C. none of these
Answer» B. <<1
48.

Loss tangent is given as _________.

A. σ/ωε
B. ω/σε
C. ωε/σ
D. σε/ω
Answer» B. ω/σε
49.

In a Cartesian coordinate system, axes x, y and z are at __________to each other.

A. 45°
B. 90°
C. 120°
D. 180°
Answer» C. 120°
50.

A scalar field is harmonic in a given region, if its Laplacian is__________.

A.
B. −1
C. 1
Answer» E.