MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
The projection that can be viewed as the projection that has a centre of projection at a finite distance from the plane of projection are called ________ |
| A. | parallel projection |
| B. | perspective projection |
| C. | isometric projection |
| D. | none of these |
| Answer» C. isometric projection | |
| 2. |
The orthographic projection that show more than one side of an object are called _______________. |
| A. | axonometric projection |
| B. | isometric projection |
| C. | both a & b |
| D. | none of these |
| Answer» D. none of these | |
| 3. |
In orthographic projection, engineering use ___________. |
| A. | top view of an object |
| B. | front view of an object |
| C. | side view of an object |
| D. | all of these |
| Answer» E. | |
| 4. |
The centre of projection for parallel projectors is at _____________. |
| A. | zero |
| B. | infinity |
| C. | one |
| D. | none of these |
| Answer» C. one | |
| 5. |
Projection rays(projectors) emanate from a _______________. |
| A. | cop(centre of projection ) |
| B. | intersect projection plane |
| C. | both a and b |
| D. | none of these |
| Answer» D. none of these | |
| 6. |
Parallel projection shows the ______________. |
| A. | true image of an object |
| B. | true size of an object |
| C. | true shape of an object |
| D. | all of these |
| Answer» E. | |
| 7. |
By which ,we can take a view of an object from different directions anddifferent distances ______________. |
| A. | projection |
| B. | rotation |
| C. | translation |
| D. | scaling |
| Answer» B. rotation | |
| 8. |
In which projection , the plane normal to the projection has equal angles with these three axes ____________________. |
| A. | wire frame model |
| B. | constructive solid geometry methods |
| C. | isometric projection |
| D. | back face removal |
| Answer» D. back face removal | |
| 9. |
The projection in which the projection plane is allowed to intersect the x, y and z-axes at equal distances ___________________. |
| A. | wire frame model |
| B. | constructive solid geometry methods |
| C. | isometric projection |
| D. | back face removal |
| Answer» D. back face removal | |
| 10. |
________refers to the result obtained by multiplying the matrix of the individual transformation representation sequences. |
| A. | wire frame model |
| B. | constructive solid geometry methods |
| C. | composite transformation |
| D. | none of these |
| Answer» D. none of these | |
| 11. |
_______refers to the common elements of graphics scenes ,often used in graphics |
| A. | quadric surfaces |
| B. | wire frame model |
| C. | composite transformation |
| D. | none of these |
| Answer» B. wire frame model | |
| 12. |
By __________ more complex objects can be constructed. |
| A. | quadric surfaces |
| B. | wire frame model |
| C. | composite transformation |
| D. | none of these |
| Answer» C. composite transformation | |
| 13. |
The types of parallel projection are _______________. |
| A. | orthographic projection and quadric projection |
| B. | orthographic projection and oblique projection |
| C. | oblique projection and quadric projection |
| D. | none of these |
| Answer» C. oblique projection and quadric projection | |
| 14. |
How many types of parallel projection are ______________. |
| A. | 1 |
| B. | 2 |
| C. | 3 |
| D. | 4 |
| Answer» C. 3 | |
| 15. |
The types of projection are _______________. |
| A. | parallel projection and perspective projection |
| B. | perpendicular and perspective projection |
| C. | parallel projection and perpendicular projection |
| D. | none of these |
| Answer» B. perpendicular and perspective projection | |
| 16. |
How many types of projection are ______. |
| A. | 1 |
| B. | 2 |
| C. | 3 |
| D. | 4 |
| Answer» C. 3 | |
| 17. |
In which transformation ,the mirror image of an object can be seen with respect to x-axis, y-axis ,z-axis as well as with respect to an arbitrary line ______________. |
| A. | reflection |
| B. | shearing |
| C. | translation |
| D. | none of these |
| Answer» B. shearing | |
| 18. |
In which transformation ,the shape of an object can be modified in any of direction depending upon the value assigned to them ______________ |
| A. | reflection |
| B. | shearing |
| C. | scaling |
| D. | none of these |
| Answer» C. scaling | |
| 19. |
Apart from the basic transformation ,________are also used |
| A. | shearing |
| B. | reflection |
| C. | both a & b |
| D. | none of these |
| Answer» D. none of these | |
| 20. |
The transformation in which the size of an object can be modified in x-direction ,y-direction and z-direction _____________ |
| A. | translation |
| B. | scaling |
| C. | rotation |
| D. | all of these |
| Answer» C. rotation | |
| 21. |
The transformation in which an object can be rotated about origin as well as any arbitrary pivot point are called __________________. |
| A. | translation |
| B. | scaling |
| C. | rotation |
| D. | all of these |
| Answer» D. all of these | |
| 22. |
The transformation in which an object can be shifted to any coordinate position in three dimensional plane are called _____________. |
| A. | translation |
| B. | scaling |
| C. | rotation |
| D. | all of these |
| Answer» D. all of these | |
| 23. |
The most basic transformation that are applied in three-dimensional planes are _____________ |
| A. | translation |
| B. | scaling |
| C. | rotation |
| D. | all of these |
| Answer» E. | |
| 24. |
Two consecutive scaling transformation S1 andSt2 are _______________ |
| A. | additive |
| B. | subtractive |
| C. | multiplicative |
| D. | none of these |
| Answer» D. none of these | |
| 25. |
Two consecutive rotation transformation R1 and R2 are _______________ |
| A. | additive |
| B. | subtractive |
| C. | multiplicative |
| D. | none of these |
| Answer» B. subtractive | |
| 26. |
Two consecutive translation transformation t1 and t2 are _____________ |
| A. | additive |
| B. | subtractive |
| C. | multiplicative |
| D. | none of these |
| Answer» B. subtractive | |
| 27. |
The alteration of the original shape of an object, image, sound, waveform or other form of information are called ___________. |
| A. | reflection |
| B. | distortion |
| C. | rotation |
| D. | none of these |
| Answer» C. rotation | |
| 28. |
Forming products of transformation matrices is often referred as __________. |
| A. | composition of matrix |
| B. | concatenation of matrix |
| C. | both a & b are same |
| D. | none of these |
| Answer» D. none of these | |
| 29. |
Each successive transformation matrix _________ the product of the preceding transformation |
| A. | pre-multiples |
| B. | post-multiples |
| C. | both a & b |
| D. | none of these |
| Answer» B. post-multiples | |
| 30. |
Some common form of clipping include ___________ |
| A. | curve clipping |
| B. | point clipping |
| C. | polygon clipping |
| D. | all of these |
| Answer» E. | |
| 31. |
The process of cutting off the line which are outside the window are called _____________ |
| A. | shear |
| B. | reflection |
| C. | clipping |
| D. | clipping window |
| Answer» D. clipping window | |
| 32. |
The object space in which the application model is defined _____________ |
| A. | screen coordinate system |
| B. | clipping window or world window |
| C. | world coordinate system |
| D. | none of these |
| Answer» D. none of these | |
| 33. |
The rectangle space in which the world definition of region is displayed are called ________________ |
| A. | screen coordinate system |
| B. | clipping window or world window |
| C. | world coordinate system |
| D. | none of these |
| Answer» C. world coordinate system | |
| 34. |
The space in which the image is displayed are called __________________ |
| A. | screen coordinate system |
| B. | clipping window |
| C. | world coordinate system |
| D. | none of these |
| Answer» B. clipping window | |
| 35. |
In which transformation the shape of an object can be modified in x-direction ,y-direction as well as in both the direction depending upon the value assigned to shearing variables ___________ |
| A. | reflection |
| B. | shearing |
| C. | rotation |
| D. | scaling |
| Answer» C. rotation | |
| 36. |
The process of mapping a world window in world coordinate system to viewport are called __________ |
| A. | transformation viewing |
| B. | view port |
| C. | clipping window |
| D. | screen coordinate system |
| Answer» B. view port | |
| 37. |
The transformation that disturbs the shape of an object are called __________ |
| A. | reflection |
| B. | shear |
| C. | rotation |
| D. | scaling |
| Answer» C. rotation | |
| 38. |
The transformation that produces a parallel mirror image of an object are called __________. |
| A. | reflection |
| B. | shear |
| C. | rotation |
| D. | scaling |
| Answer» B. shear | |
| 39. |
The complex graphics operations are _____________ |
| A. | selection |
| B. | separation |
| C. | clipping |
| D. | none of these |
| Answer» D. none of these | |
| 40. |
The selection and separation of a part of text or image for further operation are called ___________. |
| A. | translation |
| B. | shear |
| C. | reflection |
| D. | clipping |
| Answer» E. | |
| 41. |
The transformation in which the dimension of an object are changed relative to a specified fixed point is called |
| A. | translation |
| B. | scaling |
| C. | rotation |
| D. | reflection |
| Answer» C. rotation | |
| 42. |
The transformation in which an object is moved from one position to another in circular path around a specified pivot point is called _____________ |
| A. | translation |
| B. | scaling |
| C. | rotation |
| D. | reflection |
| Answer» D. reflection | |
| 43. |
The transformation in which an object is moved in a minimum distance path from one position to another is called |
| A. | translation |
| B. | scaling |
| C. | rotation |
| D. | reflection |
| Answer» D. reflection | |
| 44. |
Some additional transformation are __________ |
| A. | shear |
| B. | reflection |
| C. | both a & b |
| D. | none of these |
| Answer» D. none of these | |
| 45. |
Basic geometric transformation include _________. |
| A. | translation |
| B. | rotation |
| C. | scaling |
| D. | all of these |
| Answer» E. | |
| 46. |
In 3D clipping we perform logical ______ operation. |
| A. | nor |
| B. | xor |
| C. | or |
| D. | and |
| Answer» E. | |
| 47. |
Values less than of scaling factor _________ size of object |
| A. | enlarge |
| B. | elongate |
| C. | expand |
| D. | reduce |
| Answer» E. | |
| 48. |
Concept of window in 2D can be extended to ________________ a in 3D Clipping. |
| A. | mirror |
| B. | surface |
| C. | projection |
| D. | view volume |
| Answer» E. | |
| 49. |
In 3D clipping bit 6 of region code has value _________ if end point is in behind of volume |
| A. | 1 |
| B. | 0 |
| C. | -1 |
| D. | 0.5 |
| Answer» B. 0 | |
| 50. |
In 3D clipping bit s of region code has value _________ if end point is in front of volume |
| A. | 0 |
| B. | 1 |
| C. | -1 |
| D. | 10 |
| Answer» C. -1 | |