

MCQOPTIONS
Saved Bookmarks
This section includes 2374 Mcqs, each offering curated multiple-choice questions to sharpen your Embedded Systems knowledge and support exam preparation. Choose a topic below to get started.
551. |
In a four stroke engine, the working cycle is completed in __________ |
A. | one revolution of the crankshaft |
B. | two revolution of the crankshaft |
C. | three revolution of the crankshaft |
D. | four revolution of the crankshaft |
Answer» C. three revolution of the crankshaft | |
552. |
How is the temperature of slug maintained in the reactor? |
A. | Water |
B. | Sulphuric acid |
C. | Steam |
D. | Ice vapour |
Answer» B. Sulphuric acid | |
553. |
At what temperature of the feed slug is maintained(degree Celsius) ? |
A. | 500 to 600 |
B. | 880 to 930 |
C. | 750 to 780 |
D. | 1050 to 1150 |
Answer» C. 750 to 780 | |
554. |
For exothermic oxidation, which technology helps in better heat distribution in the reactor? |
A. | Fluidized bed |
B. | Spouted bed |
C. | Using air blowers in reactors |
D. | None of the mentioned |
Answer» B. Spouted bed | |
555. |
The mechanism of action of cyanide, a mitochondrial toxin, is by inhibiting ____________ |
A. | ATP synthase |
B. | Succinate dehydrogenase |
C. | Cytochrome c oxidase |
D. | NADH dehydrogenase |
Answer» D. NADH dehydrogenase | |
556. |
Mitochondrial DNA is one of the best marker tools for population biologists and evolutionary biologists because _____________ |
A. | Absence of genetic recombination in mt-DNA |
B. | Mitochondrial genes are specific to mt-DNA |
C. | It can be easily isolated |
D. | It undergoes spontaneous mutation |
Answer» B. Mitochondrial genes are specific to mt-DNA | |
557. |
What is the size of plant mitochondrial DNA? |
A. | 16kb |
B. | 200-2500kb |
C. | 100- 2550kb |
D. | 100-2500kb |
Answer» C. 100- 2550kb | |
558. |
What is the size of human mitochondrial DNA? |
A. | 16kb |
B. | 200kb |
C. | 2500kb |
D. | 100kb |
Answer» B. 200kb | |
559. |
Oxysomes or F0 – F1 particles occur on _____________ |
A. | Inner mitochondrial membrane |
B. | Chloroplast surface |
C. | Mitochondrial surface |
D. | Thylakoids |
Answer» B. Chloroplast surface | |
560. |
What is Mitochondrial DNA? |
A. | Simple, single stranded linear DNA molecule |
B. | Simple, single stranded circular DNA molecule |
C. | Simple, double stranded linear DNA molecule |
D. | Simple, double stranded circular DNA molecule |
Answer» E. | |
561. |
How many human mitochondrial proteins are encoded in the mitochondrial genome and synthesized within mitochondria? |
A. | 11 |
B. | 12 |
C. | 13 |
D. | 14 |
Answer» D. 14 | |
562. |
Schick Test is used for detection of which of the following disease? |
A. | Diphtheria |
B. | Tuberculosis |
C. | Erythrasma |
D. | Botulism |
Answer» B. Tuberculosis | |
563. |
Erythrasma is caused by which of the following microorganism? |
A. | Corynebacterium diphtheriae |
B. | Corynebacterium ulcerans |
C. | Corynebacterium minutissimum |
D. | Listeria monocytogenes |
Answer» D. Listeria monocytogenes | |
564. |
Which of the following inactivates IgA antibodies? |
A. | Cord factor |
B. | Diphthin |
C. | Neuroaminidase |
D. | K antigens |
Answer» C. Neuroaminidase | |
565. |
Toxin A involved in pseudomembranous colitis is a type of _______________ |
A. | endotoxin |
B. | enterotoxin |
C. | cytotoxin |
D. | neurotoxin |
Answer» C. cytotoxin | |
566. |
Patients with botulism are treated with monovalent antitoxin. |
A. | True |
B. | False |
Answer» C. | |
567. |
Which of the following temperature is suitable for the multiplication of clostridia spores? |
A. | 109 to116 degree F |
B. | 100 degree F |
C. | -2 to 16 degree F |
D. | 30-40 degree F |
Answer» B. 100 degree F | |
568. |
Which of the following organisms produces neurotoxin as a virulence factor? |
A. | Bacillus anthracis |
B. | Clostridium tetani |
C. | Streptococcus pneumoniae |
D. | Staphylococcus aureus |
Answer» C. Streptococcus pneumoniae | |
569. |
An increment of the current density can lead to blue shifts in the PL peak of mpSi. |
A. | True |
B. | False |
Answer» B. False | |
570. |
PL properties of mpSi and μpSi structures depend on _____ |
A. | temperature |
B. | etching conditions |
C. | light intensity |
D. | refractive index |
Answer» C. light intensity | |
571. |
The discovery of bright red-orange photoluminescence was the origin for the use of mpSi materials for optoelectronic devices. |
A. | True |
B. | False |
Answer» B. False | |
572. |
Which of the following is one of the important optical property of mpSi and μpSi structure? |
A. | Photo-conductivity |
B. | Stimulated emission |
C. | Photo-luminescence |
D. | Photo-emissivity |
Answer» D. Photo-emissivity | |
573. |
The effective refractive index of mpSi and μpSi are modulated to produce rugate filters. |
A. | True |
B. | False |
Answer» B. False | |
574. |
Microcavities based on mpSi and μpSi can be used to develop optical pass-band filters. |
A. | True |
B. | False |
Answer» B. False | |
575. |
DBR structures based on_____ can be implemented into Fabry–Pérot filters. |
A. | mpSi |
B. | pSi |
C. | SiO2 |
D. | graphite |
Answer» B. pSi | |
576. |
The structure of the mpSi- or μpSi-based DBR affects their refractive indices. |
A. | True |
B. | False |
Answer» B. False | |
577. |
mpSi and μpSi structures are used to develop distributed Bragg reflectors. |
A. | True |
B. | False |
Answer» B. False | |
578. |
Transcyte® is a non-living wound dressing produced by Advanced Tissue Sciences, Inc. |
A. | TRUE |
B. | FALSE |
Answer» B. FALSE | |
579. |
The epidermis is usually separated from a ____________ |
A. | skin biopsy |
B. | grafting |
C. | replacement |
D. | regeneration |
Answer» B. grafting | |
580. |
The epidermis is considered the outermost component of the skin and primarily comprised of ___________ a specific type of epithelial cells. |
A. | keratinocytes |
B. | collagen |
C. | stem cells |
D. | chondrocytes |
Answer» B. collagen | |
581. |
The technology for epidermal replacement (a confluent epithelial cell layer attached to a petroleum gauze carrier) was developed in the _______________ |
A. | 1970s |
B. | 1990s |
C. | 2000s |
D. | 2010s |
Answer» B. 1990s | |
582. |
The equation for vertical deflection can also be written as \(Δ=\frac{pa}{E} F\). What is the term F referred to as? |
A. | Deflection factor |
B. | Displacement factor |
C. | Deflection constant |
D. | Displacement constant |
Answer» C. Deflection constant | |
583. |
The Boussinesq’s equation can be applied when the one-layer system is assumed as a half-space. |
A. | True |
B. | False |
Answer» B. False | |
584. |
Find the vertical stress at a depth of 40 cm from the surface if the radius of the circular load is 17 cm and the contact pressure is 6.5 kg/cm2. |
A. | 0.43 kg/cm2 |
B. | 1.43 kg/cm2 |
C. | 0.45 kg/cm2 |
D. | 1.45 kg/cm2 |
Answer» C. 0.45 kg/cm2 | |
585. |
The deflection in the pavement surface is considered to be equal to deflection on top of the subgrade. |
A. | True |
B. | False |
Answer» B. False | |
586. |
What is the right equation to find the vertical deflection in the pavement? |
A. | \(Δ=\frac{3p}{2E(a^2+z^2 )^{1∕2}}\) |
B. | \(Δ=\frac{3pa^2}{2E(a^2+z^2 )^{1∕2}}\) |
C. | \(Δ=\frac{3pa^2}{2E(a^2+z^2 )^{3∕2}}\) |
D. | \(Δ=\frac{3pa^2}{E(a^2+z^2 )^{1∕2}}\) |
Answer» C. \(Δ=\frac{3pa^2}{2E(a^2+z^2 )^{3∕2}}\) | |
587. |
The design charts for computing vertical, tangential and radial stresses were first developed for a Poisson’s ratio of ______ |
A. | 0.3 |
B. | 0.4 |
C. | 0.2 |
D. | 0.5 |
Answer» E. | |
588. |
A flexible pavement of thickness 50 cm is laid over a subgrade. A circular load of radius 15 cm with a uniform contact pressure of 7 kg/cm2 is applied on the pavement. What would be the vertical stress on top of the subgrade? |
A. | 0.85 kg/cm2 |
B. | 1.58 kg/cm2 |
C. | 0.58 kg/cm2 |
D. | 1.85 kg/cm2 |
Answer» B. 1.58 kg/cm2 | |
589. |
The vertical ______ on top of the subgrade controls the subgrade rutting. |
A. | Tensile stress |
B. | Tensile strain |
C. | Compressive stress |
D. | Compressive strain |
Answer» E. | |
590. |
When does shear stress occur in the pavement? |
A. | Friction between pavement and tyre |
B. | Seepage into subgrade |
C. | Loading exceeds capacity |
D. | Weathering of the pavement surface |
Answer» D. Weathering of the pavement surface | |
591. |
Which of the below is not a type of stress that is commonly found in flexible pavements? |
A. | Normal stress |
B. | Shear stress |
C. | Vertical stress |
D. | Radial stress |
Answer» B. Shear stress | |
592. |
The HCF of two prime numbers a and b is _________ |
A. | a⁄b |
B. | ab |
C. | a + b |
D. | 1 |
Answer» E. | |
593. |
HCF(a, b) is equals to _________ |
A. | ab/(LCM(a, b))b) (a + b)/(LCM(a, b))c) (LCM(a, |
B. | is equals to _________a) ab/(LCM(a, b))b) (a + b)/(LCM(a, b)) |
C. | (LCM(a, b))/ab |
D. | None of the mentioned |
Answer» B. is equals to _________a) ab/(LCM(a, b))b) (a + b)/(LCM(a, b)) | |
594. |
State whether the given statement is True or False. |
A. | True |
B. | FalseView Answer |
Answer» B. FalseView Answer | |
595. |
If a number is 22 x 31 x 50 and b is 22 x 31 x 51 then hcf of a, b is? |
A. | 22 x 31 x 51 |
B. | 22 x 32 x 52 |
C. | 21 x 31 x 50 |
D. | 22 x 32 x 50 |
Answer» D. 22 x 32 x 50 | |
596. |
If LCM of two number is 10 and GCD is 5 then the product of two numbers is? |
A. | 45 |
B. | 50 |
C. | 7 |
D. | 49 |
Answer» C. 7 | |
597. |
The product of two numbers are 12 and there LCM is 6 then HCF is? |
A. | 12 |
B. | 2 |
C. | 6 |
D. | None of the mentioned |
Answer» C. 6 | |
598. |
HCF of 6, 10 is? |
A. | 60 |
B. | 30 |
C. | 10 |
D. | 2 |
Answer» E. | |
599. |
If a,b are integers such that a > b then hcf(a, b) lies in _________ |
A. | a> hcf(a, b)>bb) a>b> = hcf(a, b)c) hcf(a, |
B. | lies in _________a) a> hcf(a, b)>bb) a>b> = hcf(a, b) |
C. | hcf(a, b)> = a>b |
D. | None of the mentioned |
Answer» C. hcf(a, b)> = a>b | |
600. |
The HCF of two number 1, b(integer) are _________ |
A. | b + 2 |
B. | 1 |
C. | b |
D. | None of the mentioned |
Answer» C. b | |