Explore topic-wise MCQs in Civil Engineering.

This section includes 407 Mcqs, each offering curated multiple-choice questions to sharpen your Civil Engineering knowledge and support exam preparation. Choose a topic below to get started.

151.

A ferrous metal is

A. all the above.
B. cast iron
C. wrought iron
D. steel
Answer» E.
152.

Brittleness of cold is due to an excess of

A. none of these.
B. sulphur
C. carbon
D. phosphorus
Answer» D. phosphorus
153.

Acrylic sheets

A. turpentine.
B. possess 10 to 17 times greater breakage resistance than that of glass of equivalent thickness
C. are generally unaffected by most household detergents
D. possess the light transmission rate of 93%
Answer» E.
154.

Initial setting time of cement for asbestos cement products should be not less than

A. all the above.
B. 30 minutes
C. 50 minutes
D. 75 minutes
Answer» E.
155.

Iron ore may contain

A. all the above.
B. carbon
C. silicon
D. sulphur
Answer» E.
156.

The cement becomes unsound by the presence of excess

A. all the above.
B. sulphur
C. magnesia
D. lime
Answer» E.
157.

Second class bricks

A. yellow
B. are of dark brown colour
C. produce a metallic sound when struck
D. are well burnt
Answer» C. produce a metallic sound when struck
158.

Quick lime (or caustic lime)

A. is obtained by the calcination of pure lime stone
B. has great affinity to moisture
C. is amorphous
D. All the above.
Answer» E.
159.

The most commonly used synthetic abrasive is

A. aluminium carbide
B. boric acid
C. silicon
D. All of these.
Answer» E.
160.

Minimum required water cement ratio for a workable concrete, is

A. All of these.
B. 0.3
C. 0.4
D. 0.5
Answer» C. 0.4
161.

Plastic asphalt is

A. used as a water proofing layer over roof
B. a mixture of cement and asphalt
C. a natural asphalt
D. a refinery product.
Answer» C. a natural asphalt
162.

Lime concrete is generally used for

A. wall foundations
B. flooring at ground level
C. both (a) and (b)
D. neither (a) nor (b).
Answer» C. both (a) and (b)
163.

Plastic

A. is an organic substance
B. consists of natural or synthetic binders
C. finished products are rigid and stable at normal temperature
D. is capable of flow when necessary heat and pressure are applied
Answer» E.
164.

Red short iron cracks when bent due to the presence of

A. sulphur
B. carbon
C. phosphorus
D. silicon.
Answer» B. carbon
165.

The rocks formed by gradual deposition, are called

A. sedimentary rocks
B. igneous rocks
C. metamorphic rocks
D. none of these.
Answer» B. igneous rocks
166.

The main constituent of fly-ash, is

A. aluminium oxide
B. silica
C. ferrous oxide
D. All of these.
Answer» E.
167.

A rock contains only one mineral. It is called

A. homogeneous
B. non-homogeneous
C. monomineralic
D. polymineralic.
Answer» D. polymineralic.
168.

A good brick earth should contain :

A. about 20% to 30% of alumina
B. about 50% to 60% of silica
C. not more than 5% of lime
D. about 5 to 6% of oxide of lime
Answer» E.
169.

The property by virtue of which lime sets under water, is known as

A. slacking
B. setting
C. hydraulicity
D. calcining.
Answer» D. calcining.
170.

Brass is an alloy of

A. copper and zinc
B. zinc and lead
C. tin and silver
D. zinc and nickel
Answer» B. zinc and lead
171.

Teak wood is suitable for

A. sports articles
B. furnitures
C. railway sleepers
D. all the above.
Answer» C. railway sleepers
172.

Refractory bricks are used for

A. retaining walls
B. columns
C. piers
D. combustion chambers.
Answer» E.
173.

Wrought iron is used for

A. structural works in beams
B. small sized water pipes
C. columns and struts
D. none to these.
Answer» C. columns and struts
174.

Seasoning of timber is essential to remove

A. knots from timber
B. sap from timber
C. twisted fibre from timber
D. roughness of timber.
Answer» C. twisted fibre from timber
175.

The minimum compressive strength of Ilnd class bricks should be

A. 75 kg/cm2
B. 90 kg/cm2
C. 100 kg/cm2
D. 120 kg/cm2
Answer» B. 90 kg/cm2
176.

The type of steel used for precision levelling staff, is

A. Titanium steel
B. Carbon steel
C. Invar
D. Stainless steel.
Answer» D. Stainless steel.
177.

Asphalt is obtained from

A. petroleum distillation
B. bitumen distillation
C. plastic distillation
D. none of these.
Answer» B. bitumen distillation
178.

The softest rock is

A. marble
B. diamond
C. talc
D. quartz.
Answer» D. quartz.
179.

Wrought iron is manufactured from pig iron by

A. refining
B. pudding
C. shingling
D. rolling
Answer» E.
180.

Dextrin is

A. animal glue
B. starch glue
C. albumin glue
D. rubber based adhesive
Answer» E.
181.

The thermosetting plastic

A. becomes rigid when moulded at suitable pressure and temperature
B. at 127°C to 177°C permanently set and further application of heat does not soften it
C. charrs at 343°C
D. All the above.
Answer» E.
182.

Knots in timber are

A. defects caused by crushing fibres
B. splits radiating from the centre
C. speckled strains
D. signs of branches cut off.
Answer» E.
183.

Magnese steels

A. are non-magnetic
B. possess high electrical resistance
C. possess low coefficient of expansion
D. are used for the manufacture of rails
Answer» E.
184.

The most fire resistant paints are :

A. enamel paints
B. aluminium paints
C. asbestos paints
D. cement paints.
Answer» D. cement paints.
185.

Based on its dry weight, a freshly felled tree may contain water

A. 0.25
B. 0.5
C. 0.75
D. 100%.
Answer» E.
186.

The material generally not used as extender in paints, is

A. powdered silica
B. gypsum
C. talc
D. zinc white.
Answer» E.
187.

Slump test for concrete is carried out, to determine

A. strength
B. durability
C. workability
D. water content.
Answer» D. water content.
188.

The standard size of masonry bricks, is

A. 18 cm x 8 cm x 8 cm
B. 19 cm x 9 cm x 9 cm
C. 20 cm x 10 cm x 10 cm
D. 21 cm x 11 cm x 11 cm
Answer» C. 20 cm x 10 cm x 10 cm
189.

Based on flow quality, the sequence of pipes is

A. A.C. pipes, G.I. pipes, C.I. pipes, PVC pipes
B. C.I. pipes, G.I. pipes, A.C. pipes, PVC pipes
C. C.I. pipes, G.I. pipes, PVC pipes, A.C. pipes
D. None of these.
Answer» C. C.I. pipes, G.I. pipes, PVC pipes, A.C. pipes
190.

Bitumen felt is used for

A. water proofing
B. damp proofing
C. both (a) and (b)
D. neither (a) nor (b).
Answer» D. neither (a) nor (b).
191.

Laterite is found in

A. U.P.
B. Punjab
C. West Bengal
D. Kerala.
Answer» B. Punjab
192.

Mastic asphalt is generally used for

A. damp proof course
B. water proof layer
C. partition walls
D. both (a) and (b).
Answer» E.
193.

For light and ornamental casting, the most unsuitable pig iron, is

A. Bessemer pig
B. Grey or foundry pig
C. White or forge pig
D. Mottled pig.
Answer» E.
194.

Resins are

A. not soluble in water
B. soluble in spirit
C. used in varnishes
D. left behind on evaporation of oil
Answer» D. left behind on evaporation of oil
195.

Calcination of iron ores is done

A. to remove moisture
B. to remove carbonic acid
C. by roasting in heaps
D. after dressing
Answer» E.
196.

Sea sand used in structures causes

A. dampness
B. efflorescence
C. disintegration
D. All of these.
Answer» E.
197.

The proportions of charcoal, saltpetre and sulphur in gun powder by weight, are respectively:

A. 15, 75, 10
B. 75, 10, 15
C. 10, 15, 75
D. 10, 75, 15.
Answer» B. 75, 10, 15
198.

Asbestos is

A. corrugated sheet used for roofing
B. an incombustible fire proof material
C. an organic substance
D. a bad insulator for sound and heat
Answer» E.
199.

Duco is one of the patent forms of

A. emulsion paints
B. plastic paints
C. bituminous paints
D. aluminium paints
Answer» E.
200.

The presence of sand in brick earth prevents:

A. cracking of bricks
B. shrinkage of bricks
C. warping of bricks
D. none of these.
Answer» D. none of these.