Which of the following layout is used for “Direct- Indirect system� – McqOptions

MCQOPTIONS

1.	Which of the following layout is used for “Direct- Indirect system”.
A.	Radial system
B.	Grid system
C.	Reticulated system
D.	Interlaced system
Answer» B. Grid system

Discussion

No Comment Found

Related MCQs

Calculate the elongation of the rod if you still out of 490 mm square area and 600 M long are subjected to an axial pull of 40 kN. Take E = 2×105N/mm2.
The pipe extending from a stop cock to the storage tank is called ________
The maximum pressure in (kg/cm2) to which cast iron pipes may be subjected is _________
_____ reduces the pipe size from larger to smaller bore.
Check valve is provided on the delivery side of a pipe.
_______ valves are known as “Washout ” valves.
Scour valve in water distribution system is provided at ________
A ___ is used to prevent water from flowing back in the opposite direction.
Which of the following layout is used for “Direct- Indirect system”.
In a cantilever of span subjected to a point load of w acting at a distance of (1/3) L from free end. The deflection under load will be