Which of the following is correct for a gated D-type flip-flop? – McqOptions

MCQOPTIONS

1.	Which of the following is correct for a gated D-type flip-flop?
A.	The Q output is either SET or RESET as soon as the D input goes HIGH or LOW.
B.	The output complement follows the input when enabled.
C.	Only one of the inputs can be HIGH at a time.
D.	The output toggles if one of the inputs is held HIGH.
Answer» B. The output complement follows the input when enabled.

Discussion

No Comment Found

Related MCQs

One example of the use of an S-R flip-flop is as a(n) _________.
When using master-slave flip-flops, the data is entered into the flip-flop on the leading edge of the clock, but the output does not change until the trailing edge of the clock.
For an S-R flip-flop to be SET or RESET, the respective input must be __________.
If an input is activated by a signal transition, it is _____________.
The toggle condition in a master-slave J-K flip-flop means that Q and will switch to their ________ state(s) at the _____________________.
A D-type flip-flop is constructed by connecting an inverter between the Set and Clock terminals.
When the S and the R inputs are both HIGH the output of an S-R NOR latch will be unpredictable.
An astable multivibrator is a circuit that:
Edge-triggered flip-flops must have _________.
The S-R, D-type, and J-K flip-flops are all examples of _________________.