The thickness of a PCC pavement is 24 cm and the width of the lane is 3.5 m. Find the length of a tie bar system along the longitudinal joints if the allowable working stress in concrete is 1250 kg/cm2, unit weight of concrete is 2400 kg/m3, coefficient of friction is 1.5, allowable bond stress in deformed bars is 24.6 kg/cm2 and allowable tensile stress in deformed bars is 2000 kg/cm2.

The thickness of a PCC pavement is 24 cm and the width of the lane is

1.	The thickness of a PCC pavement is 24 cm and the width of the lane is 3.5 m. Find the length of a tie bar system along the longitudinal joints if the allowable working stress in concrete is 1250 kg/cm2, unit weight of concrete is 2400 kg/m3, coefficient of friction is 1.5, allowable bond stress in deformed bars is 24.6 kg/cm2 and allowable tensile stress in deformed bars is 2000 kg/cm2.
A.	50 cm
B.	48 cm
C.	55 cm
D.	45 cm
Answer» B. 48 cm

Discussion

No Comment Found

Related MCQs

The maximum diameter of tie bars may be limited to 20 mm to ______
Design the spacing for a dowel bar system for the following data:Design wheel load = 8000 kgPercentage of load transfer = 40 %Slab thickness = 30 cmJoint width = 2 cmRadius of relative stiffness = 105.45 cmCharacteristic compressive strength = 400 kg/cm2
The joint width is taken as 2.5 cm when dowel bar is used.
The thickness of a PCC pavement is 26 cm and the width of the lane is 3.5 m. Find the length of a tie bar system along the longitudinal joints if the allowable working stress in concrete is 1250 kg/cm2, unit weight of concrete is 2400 kg/m3, coefficient of friction is 1.4, allowable bond stress in deformed bars is 24.6 kg/cm2 and allowable tensile stress in deformed bars is 2000 kg/cm2.
What is the maximum spacing for a plain 12 mm diameter tie bar to be used in a 25 cm thick slab?
Dowel bars need not be provided for slabs having a thickness less than ______
The thickness of a PCC pavement is 24 cm and the width of the lane is 3.5 m. Find the length of a tie bar system along the longitudinal joints if the allowable working stress in concrete is 1250 kg/cm2, unit weight of concrete is 2400 kg/m3, coefficient of friction is 1.5, allowable bond stress in deformed bars is 24.6 kg/cm2 and allowable tensile stress in deformed bars is 2000 kg/cm2.
The load capacity of the dowel system is assumed to be ______ of the design ______ load.
Design the size of a dowel bar at the expansion joint for the following data:Thickness of slab = 25 cmWidth of joint = 2.5 cmAllowable flexural stress in bars = 1400 kg/cm2Allowable shear stress in bars = 1000 kg/cm2Allowable bearing stress in concrete = 100 kg/cm2
The thickness of a PCC pavement is 20 cm and the width of the lane is 3.5 m. Find the area of a tie bar system along the longitudinal joints if the unit weight of concrete is 2400 kg/3, coefficient of friction is 1.2 and allowable tensile stress in deformed bars is 2000 kg/cm2.

Discussion

No Comment Found

Related MCQs

Reply to Comment