The strain energy in a member is proportional to __________ – McqOptions

MCQOPTIONS

1.	The strain energy in a member is proportional to __________
A.	Product of stress and the strain
B.	Total strain multiplied by the volume of the member
C.	The maximum strain multiplied by the length of the member
D.	Product of strain and Young’s modulus of the material
Answer» E.

Discussion

No Comment Found

Related MCQs

A tensile load of 60kN is gradually applied to a circular bar of 4cm diameter and 5m long. What is the strain energy in the rod if the load is applied suddenly (E = 2×105 N/mm2)?
A tensile load of 50kN is gradually applied to a circular bar of 5cm diameter and 5m long. What is the strain energy absorbed by the rod (E = 200GPa)?
A tensile load of 60kN is gradually applied to a circular bar of 4cm diameter and 5m long. What is the stretch in the rod if E = 2×105 N/mm2?
A bar of cross-section A and length L is subjected to an axial load W. the strain energy stored in the bar would be __________
The strain energy in a member is proportional to __________
If forces P, P and P of a system are such that the force polygon does not close, then the system will __________
A material of youngs modulus and Poissons ratio of unity is subjected to two principal stresses σ1 and σ2 at a point in two dimensional stress system. The strain energy per unit volume of the material is __________
A rectangular block of size 400mm x 50mm x 50mm is subjected to a shear stress of 500kg/cm2. If the modulus of rigidity of the material is 1×106 kg/cm2, the strain energy will be __________
PL3/3EI is the deflection under the load P of a cantilever beam. What will be the strain energy?
In a material of pure shear stress τthe strain energy stored per unit volume in the elastic, homogeneous isotropic material having elastic constants E and v will be: