The pressure of a medium is changed from 1.01 ´ 105 Pa to 1.165 ´ 105 Pa and change in volume is 10% keeping temperature constant. The Bulk modulus of the medium is

The pressure of a medium is changed from 1.01 ´ 105 Pa to 1.165 ´ 10

1.	The pressure of a medium is changed from 1.01 ´ 105 Pa to 1.165 ´ 105 Pa and change in volume is 10% keeping temperature constant. The Bulk modulus of the medium is
A.	\[204.8\times {{10}^{5}}Pa\]
B.	\[102.4\times {{10}^{5}}Pa\]
C.	+ 0.04 dioptre
D.	1.55´ 105 Pa
Answer» E.

Discussion

No Comment Found

Related MCQs

The stress-strain curves for brass, steel and rubber are shown in the figure. The lines A, B and C are for
The graph shown was obtained from experimental measurements of the period of oscillations T for different masses M placed in the scale pan on the lower end of the spring balance. The most likely reason for the line not passing through the origin is that the [NCERT 1978]
An elastic material of Young's modulus Y is subjected to a stress S. The elastic energy stored per unit volume of the material is [MP PET 1991; MP PMT 1990, 96; IIT 1992; AIIMS 1997]
Two rods of different materials having coefficients of linear expansion \[{{\alpha }_{1}},\,{{\alpha }_{2}}\] and Young's moduli \[{{Y}_{1}}\] and \[{{Y}_{2}}\] respectively are fixed between two rigid massive walls. The rods are heated such that they undergo the same increase in temperature. There is no bending of rods. If \[{{\alpha }_{1}}:{{\alpha }_{2}}=2:3\], the thermal stresses developed in the two rods are equally provided \[{{Y}_{1}}:{{Y}_{2}}\] is equal to [IIT 1989]
The compressibility of water is \[4\times {{10}^{-5}}\] per unit atmospheric pressure. The decrease in volume of 100 cubic centimeter of water under a pressure of 100 atmosphere will be [MP PMT 1990]
The pressure of a medium is changed from 1.01 ´ 105 Pa to 1.165 ´ 105 Pa and change in volume is 10% keeping temperature constant. The Bulk modulus of the medium is
The adiabatic elasticity of a gas is equal to\[\] [CPMT 1982]
The bulk modulus of an ideal gas at constant temperature [MP PMT 2004]
Bulk modulus was first defined by [CPMT 1987]
Assertion : Spring balances show correct readings even after they had been used for a long time interval. Reason : On using for long time, spring balances losses its elastic strength.

The pressure of a medium is changed from 1.01 ´ 105 Pa to 1.165 ´ 105 Pa and change in volume is 10% keeping temperature constant. The Bulk modulus of the medium is

Discussion

No Comment Found

Related MCQs

Reply to Comment