The FIP-1984 limits for deflection that occurs after addition of part – McqOptions

MCQOPTIONS

1.	The FIP-1984 limits for deflection that occurs after addition of partitions up to __________
A.	Span/200 to Span/300
B.	Span/250 to Span/350
C.	Span/500 to Span/1000
D.	Span/170 to Span/320
Answer» D. Span/170 to Span/320

Discussion

No Comment Found

Related MCQs

The French code limits the deflection of members carrying masonry and partition walls up to __________
The FIP-1984 limits for deflection that occurs after addition of partitions up to __________
The FIP-1984 limits for total deflection below the level of supports up to __________
The floors not supporting and not attached to non structural elements are damaged by __________
The type of deflection of not supporting and non structural elements of flat roofs is?
The British code specifies a maximum deflection limit of span which the sag in the member usually become noticeable is?
If the finishes are to be applied to the prestressed concrete members, the total upward deflection should not exceed __________
The deflection including the effects of temperature, creep and shrinkage occurring after the erection should not normally exceed __________
The final deflection due to all loads including the efforts of temperature, creep and shrinkage should normally exceed span up to __________
Which one of the following is the Indian standard regarded to the limit state of deflection?