The design of overlay can be done using the Benkelman beam deflection

1.	The design of overlay can be done using the Benkelman beam deflection studies result.
A.	True
B.	False
Answer» B. False

Discussion

No Comment Found

Related MCQs

If the design traffic is 20 msa and a characteristic deflection of 4.5 mm, what would be the thickness of bituminous macadam overlay if WBM binder course is to be laid?
What is the recommended thickness of bituminous concrete surface course in the overlay design?
The design traffic for a minor highway is found to be 10.55 msa. The BBD studies conducted at 30°C on sandy soil with 8% moisture content and an annual rainfall of 1300 mm gave the following results:Rebound deflection values recorded at various points = 1.40, 1.38, 1.49, 1.50, 1.55, 1.44, 1.58, 1.43, 1.33, 1.37 mm
Traffic studies were conducted on a 4-lane flexible pavement highway and the average CVPD was found to be 3000 in one direction. The growth rate is 7.5%, VDF is 4.5 and the estimated time of completion of the overlay is 2 years. The BBD studies yielded the mean rebound deflection to be 3 mm when tested at 35°C in the monsoon time and the standard deviation is found to be 0.22 mm. What would be the thickness of the overlay if it to be designed for 10 years?
The overlay can be directly laid over the existing surface after cleaning.
Traffic studies were conducted on a 4-lane divided flexible pavement highway and the average CVPD was found to be 3500 in one direction. The growth rate is 5%, VDF is 4.5 and the estimated time of completion of the overlay is 2 years. The BBD studies yielded the characteristic deflection to be 2.4 mm. What would be the thickness of the overlay if it to be designed for 10 years?
If the design traffic is 15 msa and a characteristic deflection of 3 mm, compute the thickness of overlay if DBM binder course and bituminous concrete (BC) surface course is to be adopted. What would be the thickness of the BC surface course?
The thickness of the overlay obtained from design chart is in terms of bituminous macadam construction. What is the conversion if thickness in terms of DBM is required?
The design curves relating ______ with the characteristic deflection obtained from BBD studies in the code is used for overlay thickness determination.
The design of overlay can be done using the Benkelman beam deflection studies result.

The design of overlay can be done using the Benkelman beam deflection studies result.

Discussion

No Comment Found

Related MCQs

Reply to Comment