MCQOPTIONS
Bookmark
Saved Bookmarks
→
Electronics & Communication Engineering
→
Signals And Systems
→
Modulation scheme used in GSM is
1.
Modulation scheme used in GSM is
A.
DPSK
B.
QPSK
C.
GMSK
D.
BFSK
Answer» D. BFSK
Show Answer
Discussion
No Comment Found
Post Comment
Related MCQs
For a coherent FSK with 32 levels, the probability of bit error is ______ the probability of symbol error.
A satellite system employs QPSK modulation with 40% excess bandwidth per carrier including guard band. The voice channels use 64 kbps PCM coding. The no. of channels supported by 36 MHz bandwidth of the transponder in bandwidth limited case will be
For a binary FSK signal with a mask frequency of 49 kHz, a space-frequency of 51 kHz and on the input bit rate of 2 kbps, the peak frequency deviation will be
A carrier is modulated by a digital bit stream having one of the possible phases of 0°, 90°, 180°, and 270°. Then the modulation is termed as
A video camera generates data at a rate of 5 Mbps. The data is channel coded at rate 1/3 and 8 PSK modulated. Which of the following statements is correct?
Coherent orthogonal binary FSK modulation is used to transmit two equiprobable symbol waveforms
For a binary phase-shift keying modulator with a carrier frequency of 70 MHz and input bit rate of 10 Mbps, the maximum Upper Side Frequency (USF) and minimum Lower Side Frequency (LSF) are respectively
A coherent QPSK demodulator is required on the ground for receiving data from an LEO satellite. What should be the optimum order of PLL in the carrier phase tracking loop?
In a digital communication system employing Frequency Shift Keying (FSK), the 0 and 1 bit are represented by sine waves of 10 kHz and 25 kHz respectively. These waveforms will be orthogonal for a bit interval of
ASK stands for:
Reply to Comment
×
Name
*
Email
*
Comment
*
Submit Reply
Your experience on this site will be improved by allowing cookies. Read
Cookie Policy
Reject
Allow cookies
