In a junction diode, an equilibrium condition occurs when ___________ – McqOptions

MCQOPTIONS

1.	In a junction diode, an equilibrium condition occurs when ____________
A.	Δngreater than Δp
B.	Δnsmaller than Δp
C.	Constant current flow
D.	Optical amplification through stimulated emission
Answer» D. Optical amplification through stimulated emission

Discussion

No Comment Found

Related MCQs

If a particular optical power is coupled from an incoherent LED into a low-NA fiber, the device must exhibit very high radiance.
Determine coupling efficiency into the fiber when GaAs LED is in close proximity to fiber core having numerical aperture of 0.3.
In a GaAs LED, compute the loss relative to internally generated optical power in the fiber when there is small air gap between LED and fiber core. (Fiber coupled = 5.5 * 10-4Pint)
For a GaAs LED, the coupling efficiency is 0.05. Compute the optical loss in decibels.
A planar LED is fabricated from GaAs is having a optical power emitted is 0.018% of optical power generated internally which is 0.018% of optical power generated internally which is 0.6 P. Determine external power efficiency.
A planar LED fabricated from GaAs has a refractive index of 2.5. Compute the optical power emitted when transmission factor is 0.68.
The Lambertian intensity distribution __________ the external power efficiency by some percent.
Compute power internally generated within a double-heterojunction LED if it has internal quantum efficiency of 64.5 % and drive current of 40 mA with a peak emission wavelength of 0.82 μm.
In a junction diode, an equilibrium condition occurs when ____________
The carrier recombination lifetime becomes majority or injected carrier lifetime.