For the same triggering angle and ratings – McqOptions

MCQOPTIONS

1.	For the same triggering angle and ratings
A.	a semi-converter operates at lower output voltage than a full converter
B.	a semi-converter operates at higher output voltage than a full converter
C.	a semi-converter has lower values of input p.f as compared to a full converter
D.	a semi-converter has more THD as compared to a full converter
Answer» C. a semi-converter has lower values of input p.f as compared to a full converter

Discussion

No Comment Found

Related MCQs

For the same triggering angle and ratings
A single-phase semi-converter circuit is supplying power to a motor load. The average value of load voltage is 176.72 V and the rms value is 219.3 V. Find the VRF (voltage ripple factor).
A single-phase semi-converter is connected to a 230 V source and is feeding a load R = 10 Ω in series with a large inductance that makes the load current ripple free. For α = 45°, find the rectification efficiency. The RMS value of output voltage is 219.3 V
A single-phase semi-converter is connected to a 230 V source and is feeding a load R = 10 Ω in series with a large inductance that makes the load current ripple free. Find the average output current for α = 45°.
In any AC-DC circuit, the freewheeling action
For the circuit shown below, T1 and T2 (from top T1 and T2) are both fired at an angle α. Then from ωt = π to ωt = π+α
Find the circuit turn-off time (Tc) for the below given semi-converter configuration. Take α = 30° and Vs = 230√2 sin100t
In the below given circuit, from ωt = π to α+π and continuous load current configuration
A single-phase asymmetrical semi-converter employs
A single-phase symmetrical semi-converter employs