Find the Permissible stresses and range of stresses for class 1 structure fcu = 50n/mm2, fck = 35n/mm2 according to BS: 8110 recommendations for fcu = 50n/mm2 and fci = 35n/mm2,fct = 0.5fci = 17.5n/mm2?

Find the Permissible stresses and range of stresses for class 1 struc

1.	Find the Permissible stresses and range of stresses for class 1 structure fcu = 50n/mm2, fck = 35n/mm2 according to BS: 8110 recommendations for fcu = 50n/mm2 and fci = 35n/mm2,fct = 0.5fci = 17.5n/mm2?
A.	16.5n/mm2
B.	12.56n/mm2
C.	13.56n/mm2
D.	12.00n/mm2
Answer» B. 12.56n/mm2

Discussion

No Comment Found

Related MCQs

Find resultant maximum long term deflection if ϕ is 2.6, αy is 38.5mm, αg is 46mm, αp is 74.7mm?
Calculate the span section cracked in flexure (M=M0) Fcp = 23.4n/mm2, zb is 99×106 and stress induced is 1000?
Find ratio for ultimate flexural strength at the centre – span section given that Aps = 3000mm2, d = 1150mm, fcu = 50n/mm2, bw = 150mm, fpu = 1500n/mm2, b = 600mm, ht = 250mm, design ultimate moment mud = 3400knm?
Find force in cable using Freyssinet cables 12-8mm diameter and stressed to 1100n/mm2 of eccentricity 50 and the prestressing force is given as 1000n/mm2?
Find prestressing force if area is 36.75mm2 of eccentricity 580 given finf is 26.5kn/m and zb is 99×106?
Find the Permissible stresses and range of stresses for class 1 structure fcu = 50n/mm2, fck = 35n/mm2 according to BS: 8110 recommendations for fcu = 50n/mm2 and fci = 35n/mm2,fct = 0.5fci = 17.5n/mm2?
Calculate working moment if design working load is 19.8kn/m covered over a span of 30m (actual self weight of girder is 8.8kn/m)?
Find cross-sectional dimensions thickness of web if hf/d ratio is 0.23 and bw/b ratio is 0.25 and b is 0.5d?
Calculate ultimate moment and shear of effective span is 30m, live load is 9kn/m, dead load excluding self weight is 2kn/m, load factors for dead load is 1.4 for live load is 1.6 cube strength of concrete fcu is 50n/mm2 cube strength at transfer is fci is 35n/mm2, tensile strength of concrete Ec is 34kn/mm2 loss ratio ɳ is 0.85 and 8mm diameter high tensile strength fpu is 1500n/mm2 are available for use and the modulus of elasticity of high tensile wires is 200kn/mm2?
CALCULATE_THE_SPAN_SECTION_CRACKED_IN_FLEXURE_(M=M0)_FCP_=_23.4N/MM2,_ZB_IS_99‚ÄÖ√†√∂‚ÀÖ‚Â•106_AND_STRESS_INDUCED_IS_1000??$#

Find the Permissible stresses and range of stresses for class 1 structure fcu = 50n/mm2, fck = 35n/mm2 according to BS: 8110 recommendations for fcu = 50n/mm2 and fci = 35n/mm2,fct = 0.5fci = 17.5n/mm2?

Discussion

No Comment Found

Related MCQs

Reply to Comment