Conventional cleaved mirror structures are difficult to fabricate wit – McqOptions

MCQOPTIONS

1.	Conventional cleaved mirror structures are difficult to fabricate with the cavity lengths below __________
A.	200 μm and greater than 150 μm
B.	100 μm and greater than 50 μm
C.	50 μm
D.	150 μm
Answer» D. 150 μm

Discussion

No Comment Found

Related MCQs

_________________ is a technique used to render the non-conducting material around the active cavity by producing permanent defects in the implanted area.
The narrow line-width obtained under the CW operation for quarter wavelength shifted DFB laser is ________________
The InGaAsP/InP double channel planar DFB-BH laser with a quarter wavelength shifted first order grating provides a single frequency operation and incorporates a phase shift of ______________
Fabry-Perot devices with BH geometries high modulation speeds than DFB-BH lasers.
DBF-BH lasers exhibit low threshold currents in the range of ________________
The semiconductor lasers employing the distributed feedback mechanism are classified in _________________ categories.
The first order grating (l=1) provide the strongest coupling within the device.
In the given equation, corrugation period is given by lλb/2Ne. If λb is the Bragg wavelength, then what does ‘l’ stand for?
Conventional cleaved mirror structures are difficult to fabricate with the cavity lengths below __________
DBF-BH_LASERS_EXHIBIT_LOW_THRESHOLD_CURRENTS_IN_THE_RANGE_OF_________________?$