A potentiometer has uniform potential gradient. The specific resistance of the material of the potentiometer wire is 10-9Ωm and the current passing through it is 0.5A and the cross sectional area of the wire is 10-8m2. Calculate the potential gradient along the potentiometer wire.

A potentiometer has uniform potential gradient. The specific resistan

1.	A potentiometer has uniform potential gradient. The specific resistance of the material of the potentiometer wire is 10-9Ωm and the current passing through it is 0.5A and the cross sectional area of the wire is 10-8m2. Calculate the potential gradient along the potentiometer wire.
A.	0.5 × 10-9 V/m
B.	0.5 × 10-8 V/m
C.	0.5 × 10-1 V/m
D.	0.5 × 10-15 V/m
Answer» D. 0.5 × 10-15 V/m

Discussion

No Comment Found

Related MCQs

Pick out the application of potentiometer from the following.
A potentiometer has uniform potential gradient. The specific resistance of the material of the potentiometer wire is 10-9Ωm and the current passing through it is 0.5A and the cross sectional area of the wire is 10-8m2. Calculate the potential gradient along the potentiometer wire.
The balancing length of a potentiometer is at 120 cm. On shunting the cell with a resistance of 4 ohms, the balancing point shifts to a length of 60 cm. Then, find the internal resistance of the cell.
In a potentiometer of 5 wires, the balance point is obtained on the 2nd wire. To shift the balance point to the 4th, we should decrease the current of the main circuit.
A potentiometer wire of length 20 m has a resistance of 50 ohms. It is connected in series with a resistance box and a 5 V storage cell. If the potential gradient along the wire is 0.5 mV/cm, what is the resistance unplugged in the box?
A potentiometer using cell C of emf 5V and internal resistance 0.2 ohms is connected to a wire AB in the figure below. A standard cell C0 of a constant emf of 1.10 V gives a balance point at 55 cm of the wire. When C0 is replaced by a cell of emf E, the balance point is obtained at 85 cm. What is the value of E?
A potentiometer wire of length 100 cm has a resistance of 30 ohms. It is connected in series with a resistance of 20 ohms and accumulator of emf 8V having negligible internal resistance. A source of 1.2V is balanced against a length L of the potentiometer wire. What is the value of L?

A potentiometer has uniform potential gradient. The specific resistance of the material of the potentiometer wire is 10-9Ωm and the current passing through it is 0.5A and the cross sectional area of the wire is 10-8m2. Calculate the potential gradient along the potentiometer wire.

Discussion

No Comment Found

Related MCQs

Reply to Comment