A parallel RLC circuit with R1 = 20, L1 = ( frac{1}{100} ) and C1 = – McqOptions

MCQOPTIONS

1.	A parallel RLC circuit with R₁ = 20, L₁ = ( frac{1}{100} ) and C₁ = ( frac{1}{200} ) is scaled giving R₂ = 10⁴, L₂ = 10^-4 and C₂, the value of C₂ is ___________
A.	0.10 nF
B.	0.3 nF
C.	0.2 nF
D.	0.4 nF
Answer» D. 0.4 nF

Discussion

No Comment Found

Related MCQs

Given two voltages, 50 0 V and 75 - 60 V. The sum of these voltages is ___________
Consider a cube having resistance R on each of its sides. For this non-planar graph, the number of independent loop equations are _______________
Consider a circuit having resistances 16 and 30 is excited by a voltage V. A variable resistance R is connected across the 16 resistance. The power dissipated in 30 resistance will be maximum when value of R is __________
Consider a series RL circuit in which current 12 A is flowing through R and current 16 A is flowing through L. The current supplied by the sinusoidal current source I is ____________
A 50 Hz current has an amplitude of 25 A. The rate of change of current at t = 0.005 after i = 0 and is increasing is ____________
Two coils X and Y have self-inductances of 5 mH and 10 mH and mutual inductance of 3 mH. If the current in coils X change at a steady rate of 100 A/s, the emf induced in coil Y is ____________
A magnetic circuit has an iron length of 100 cm and air gap length 10 cm. If <sub>r</sub> = 200 then which of the following is true?
The Thevenin s equivalent of a network is a 10 V source in series with 2 resistances. If a 3 resistance is connected across the Thevenin s equivalent is _____________
Barletts Bisection Theorem is applicable to ___________
A parallel RLC circuit with R<sub>1</sub> = 20, L<sub>1</sub> = ( frac{1}{100} ) and C<sub>1</sub> = ( frac{1}{200} ) is scaled giving R<sub>2</sub> = 10<sup>4</sup>, L<sub>2</sub> = 10<sup>-4</sup> and C<sub>2</sub>, the value of C<sub>2</sub> is ___________