Explore topic-wise MCQs in Networking.

This section includes 310 Mcqs, each offering curated multiple-choice questions to sharpen your Networking knowledge and support exam preparation. Choose a topic below to get started.

51.

When the Cable TV is used for data transfer then the downstream band has

A. 11 channels
B. 22 channels
C. 33 channels
D. 44 channels
Answer» D. 44 channels
52.

The bandwidth is proportional to the

A. baud rate
B. data rate
C. delay rate
D. bit rate
Answer» B. data rate
53.

Quadrature amplitude modulation is a combination of

A. BPSK and PSK
B. ASK and BPSK
C. ASK and PSK
D. BPSK and QPSK
Answer» D. BPSK and QPSK
54.

Line coding, block coding and scrambling are three techniques of

A. Digital to digital conversion
B. Digital to analog conversion
C. Analog to analog conversion
D. Analog to digital conversion
Answer» B. Digital to analog conversion
55.

MLT-3 schemes uses three levels

A. 0, V,-V
B. 0,1,2
C. M,L,T
D. 0,-1,-2
Answer» B. 0,1,2
56.

AM stations are allowed carrier frequencies anywhere between

A. 5-10KHz
B. 50-100KHz
C. 250-1000KHz
D. 530- 1700 kHz
Answer» E.
57.

The minimum time required to download one million bytes of information for V32 modem would be

A. 800 s
B. 834 s
C. 900 s
D. 1000 s
Answer» C. 900 s
58.

How many modes are currently in used for propagating light along optical channels

A. one mode
B. two modes
C. three modes
D. five modes
Answer» C. three modes
59.

Cable TV networks started to distribute broadcast video signals to locations in the late

A. 1940s
B. 1950s
C. 1960s
D. 1970s
Answer» B. 1950s
60.

The local loop has a bandwidth of

A. 400Hz
B. 4Hz
C. 40Hz
D. 4000Hz
Answer» E.
61.

In NRZ-I the inversion or the lack of inversion determines the

A. Value of the bytes
B. value of the bits
C. Status of Frame
D. None of the above
Answer» C. Status of Frame
62.

Tele is a word in

A. French
B. Egyptian
C. German
D. Greek
Answer» E.
63.

In the adaptive delta modulation, for better performance, the value of delta is

A. fixed
B. not fixed
C. infinity
D. zero
Answer» C. infinity
64.

The range of middle frequency is

A. 3-30 kHz
B. 900KHz-300 kHz
C. 3khz-30 MHz
D. 300 kHz-3 MHz
Answer» E.
65.

Both station can transmit and receive data simultaneously in

A. simplex mode
B. Half duplex mode
C. Full duplex mode
D. None of Above
Answer» D. None of Above
66.

In star topology if the central hub goes down, it effects

A. One node
B. No node
C. whole system
D. Don't know
Answer» D. Don't know
67.

Downstream data are modulated using the

A. 64-QAM modulation
B. 68-QAM modulation
C. 70-QAM modulation
D. 100-QAM modulation
Answer» B. 68-QAM modulation
68.

The total bandwidth required for AM can be determined from the bandwidth of the audio signal

A. BAM = 2B
B. BAM = 4B
C. BAM = 6B
D. BAM = 10B
Answer» B. BAM = 4B
69.

Analog-to-analog conversion can be accomplished in

A. one way
B. two ways
C. three ways
D. four ways
Answer» D. four ways
70.

The technique that is most common to change an analog signal to digital data is

A. delta modulation
B. pulse code modulation
C. sampling
D. Quantizing
Answer» C. sampling
71.

The ray of light refracts and moves closer to the surface then the angle of the incidence is

A. equal to the critical angle
B. not equal to the critical angel
C. less than the critical angle
D. greater than the critical angle
Answer» D. greater than the critical angle
72.

In Discrete Multitone Technique (DMT), Channel 0 is reserved for

A. data communication
B. audio communication
C. Both a and b
D. voice communication
Answer» E.
73.

The Nyquist sampling rate is

A. f
B. 2f
C. 4f
D. 6f
Answer» C. 4f
74.

In Binary Phase Shift Keying (BPSK), there are two values of phase i.e. 0 degree and

A. 180 degree
B. 90 degree
C. 360 degree
D. 720 degree
Answer» B. 90 degree
75.

The bit rate for 1000 baud, FSK, baud rate would be

A. 1000 bps
B. 1500 bps
C. 2000 bps
D. 100 bps
Answer» B. 1500 bps
76.

In Coaxial Cable, the whole cable is protected by a

A. shield
B. plastic cover
C. insulator
D. conductor
Answer» C. insulator
77.

The most efficient and commonly used digital to analog conversion mechanism is

A. ASK
B. FSK
C. PSK
D. QAM
Answer» E.
78.

The coaxial cable has a bandwidth that ranges from

A. 5- 750MHz
B. 10-300 MHz
C. 5-550 MHz
D. 10-3000MHz
Answer» B. 10-300 MHz
79.

Infrared signals can be used for

A. long-range communication
B. short-range communication
C. both
D. none
Answer» C. both
80.

Digital information in which the carrier signal is modified by one or more of its characteristics is called

A. Demodulation
B. Modulation
C. Decoding
D. Encoding
Answer» C. Decoding
81.

Switched/56 service is the digital version of an

A. analog leased service
B. Digital data service
C. analog switched service
D. 900 service
Answer» D. 900 service
82.

The inverse of the sampling interval is called the

A. sampling rate
B. delta rate
C. baud rate.
D. bit rate
Answer» B. delta rate
83.

The services of WorldCom, Sprint and Verizon are provided by

A. inter-LATA
B. intra-LATA
C. LATA
D. local exchange carrier
Answer» B. intra-LATA
84.

The V.34bis modem provides a bit rate of 28,800 with a

A. 960-point constellation
B. 1250-point constellation
C. 1460-point constellation
D. 1664-point constellation
Answer» B. 1250-point constellation
85.

The value of r in analog transmission is

A. log2L
B. 2log L
C. log L/2
D. Log L
Answer» B. 2log L
86.

In BPSK, we use a polar Non Return to Zero (NRZ) signal for

A. Decoding
B. Encoding
C. Modulation
D. Demodulation
Answer» D. Demodulation
87.

Which of the following statement is correct ?

A. Satellite transponders contain a device that echos the radiation without change from one point on earth to another
B. satellite transponders us lower frequency reception of radiation from earth stations and higher frequency for transmission to earth station
C. Satellite transponders use a higher frequency for reception of radiation from earth stations and lower frequency for transmission to earth stations
D. Satellite transponder contain devices that transform the message sent from one location on earth to a different code for transmission to another location
Answer» D. Satellite transponder contain devices that transform the message sent from one location on earth to a different code for transmission to another location
88.

The Very high-bit-rate Digital Subscriber Line's (VDSAL) downstream rate is

A. 768 kbps
B. 1.5 Mbps
C. 1.5-6.1 Mbps
D. 25-55 Mbps
Answer» E.
89.

The Asymmetric Digital Subscriber Line (ADSL), Very high-bit-rate Digital Subscriber Line (VDSL), High-bit-rate Digital Subscriber Line (HDSL) and Symmetric Digital Subscriber Line (SDSL) is referred to as

A. All DSL
B. yDSL
C. nDSL
D. xDSL
Answer» E.
90.

A signal cannot be sampled with an

A. infinite frequency
B. finite frequency
C. infinite bandwidth
D. finite bandwidth
Answer» D. finite bandwidth
91.

Optical fibers use reflection to guide light through a

A. channel
B. metal wire
C. light
D. plastic
Answer» B. metal wire
92.

For Pulse Code Modulation (PCM), the quantization error is much greater than

A. decoding
B. Encoding
C. delta modulation
D. multiplexing
Answer» D. multiplexing
93.

The designers of ADSL have divided the available bandwidth in to

A. local loop evenly
B. local loop unevenly
C. unidirectional
D. both a and c
Answer» D. both a and c
94.

The term that refers to a strong material used in the fabrication of bulletproof vests is called

A. Kevlar
B. outer jacket
C. cladding
D. None of the above
Answer» B. outer jacket
95.

The effectiveness of a data communications system depends on four fundamental characteristics

A. delivery, accuracy
B. timeliness and jitter
C. jitter and delivery
D. both a and b
Answer» E.
96.

When the system delivers data accurately then it is called

A. Accuracy
B. Delivery
C. Jitter
D. Timelessness
Answer» B. Delivery
97.

Two computers connected by an Ethernet hub are of

A. LAN topology
B. MAN topology
C. WAN topology
D. None of the above
Answer» B. MAN topology
98.

Unguided communication media is

A. coaxial cable
B. fiber optic cable
C. twisted pair cable
D. satellite
Answer» E.
99.

A term that refers to a code that is generated to detect some or all of errors occurred during transmission is

A. Baseline Wandering
B. Built in error detection
C. Self-detect error code
D. Bug resolver
Answer» C. Self-detect error code
100.

The five components that make up a data communications system are the message, sender, receiver, medium and

A. protocol
B. Code
C. connecting device
D. both a and b
Answer» B. Code