The time for which the data is to be on the BUS is affected by

Propagation delay of the circuit

Propagation delay of the circuit & Setup time of the device

In synchronous BUS, the devices get the timing signals from

Timing signals are not used at all

The primary function of the BUS is

To provide a path for communication between the processor and other devices

To connect the various devices to the cpu

To provide a path for communication between the processor and other devices

To facilitate data transfer between various devices

Explore topic-wise MCQs in Computer Organization.

This section includes 10 Mcqs, each offering curated multiple-choice questions to sharpen your Computer Organization knowledge and support exam preparation. Choose a topic below to get started.

1.	WHICH_IS_FED_INTO_THE_BUS_FIRST_BY_THE_INITIATOR..???$
A.	Data
B.	Address
C.	Commands or controls
D.	Address, Commands or controls
Answer» E.

Discussion

2.	______________signal_is_used_as_an_acknowledgement_signal_by_the_slave_in_Multiple_cycle_transfers.$
A.	Ack signal
B.	Slave ready signal
C.	Master ready signal
D.	Slave received signal
Answer» C. Master ready signal

Discussion

3.	The Master strobes the slave at the end of each clock cycle in Synchronous BUS?
A.	True
B.	False
Answer» B. False

Discussion

4.	The time for which the data is to be on the BUS is affected by
A.	Propagation delay of the circuit
B.	Setup time of the device
C.	Memory access time
D.	Propagation delay of the circuit & Setup time of the device
Answer» E.

Discussion

5.	The delays caused in the switching of the timing signals is due to
A.	Memory access time
B.	WMFC
C.	Propagation delay
D.	Processor delay
Answer» D. Processor delay

Discussion

6.	In synchronous BUS, the devices get the timing signals from
A.	Timing generator in the device
B.	A common clock line
C.	Timing signals are not used at all
D.	None of the mentioned
Answer» C. Timing signals are not used at all

Discussion

7.	The device which interacts with the initiator is
A.	Slave
B.	Master
C.	Responder
D.	Friend
Answer» B. Master

Discussion

8.	The device which starts data transfer is called
A.	Master
B.	Transactor
C.	Distributor
D.	Initiator
Answer» E.

Discussion

9.	The classification of BUSes into synchronous and asynchronous is based on
A.	The devices connected to them
B.	The type of data transfer
C.	The Timing of data transfers
D.	None of the mentioned
Answer» D. None of the mentioned

Discussion

10.	The primary function of the BUS is
A.	To connect the various devices to the cpu
B.	To provide a path for communication between the processor and other devices
C.	To facilitate data transfer between various devices
D.	All of the mentioned
Answer» B. To provide a path for communication between the processor and other devices

Discussion

Explore topic-wise MCQs in Computer Organization.

WHICH_IS_FED_INTO_THE_BUS_FIRST_BY_THE_INITIATOR..???$

______________signal_is_used_as_an_acknowledgement_signal_by_the_slave_in_Multiple_cycle_transfers.$

The Master strobes the slave at the end of each clock cycle in Synchronous BUS?

The time for which the data is to be on the BUS is affected by

The delays caused in the switching of the timing signals is due to

In synchronous BUS, the devices get the timing signals from

The device which interacts with the initiator is

The device which starts data transfer is called

The classification of BUSes into synchronous and asynchronous is based on

The primary function of the BUS is