MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 10 Mcqs, each offering curated multiple-choice questions to sharpen your Manufacturing Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
During a honing process, reciprocating speed of honing tool was 9m/min with a cross hatch angle of 30 degree. Rotary speed in m/min is equal to |
| A. | 33.58 |
| B. | 35 |
| C. | 30 |
| D. | 25.23 |
| Answer» B. 35 | |
| 2. |
During a honing process, reciprocating speed of honing tool was 9m/min with a rotary speed of 25m/min. Cross hatch angle in degrees is equal to |
| A. | 40 |
| B. | 35 |
| C. | 30 |
| D. | 25 |
| Answer» B. 35 | |
| 3. |
For practical honing conditions, cross hatch angle in degrees is generally taken in the range of |
| A. | 20 to 40 |
| B. | 40 to 50 |
| C. | 50 to 60 |
| D. | 10 to 15 |
| Answer» B. 40 to 50 | |
| 4. |
DURING_A_HONING_PROCESS,_RECIPROCATING_SPEED_OF_HONING_TOOL_WAS_9M/MIN_WITH_A_ROTARY_SPEED_OF_25M/MIN._CROSS_HATCH_ANGLE_IN_DEGREES_IS_EQUAL_TO?$ |
| A. | 40 |
| B. | 35 |
| C. | 30 |
| D. | 25 |
| Answer» B. 35 | |
| 5. |
During a honing process, reciprocating speed of honing tool was 9m/min with a cross hatch angle of 30 degree. Rotary speed in m/min is equal to$ |
| A. | 33.58 |
| B. | 35 |
| C. | 30 |
| D. | 25.23 |
| Answer» B. 35 | |
| 6. |
For practical honing conditions, cross hatch angle in degrees is generally taken in the range o? |
| A. | 20 to 40 |
| B. | 40 to 50 |
| C. | 50 to 60 |
| D. | 10 to 15 |
| Answer» B. 40 to 50 | |
| 7. |
Which of the following is the correct grain size range of abrasive grains for honing stones? |
| A. | 800 grit to 1000 grit |
| B. | 5 grit to 10 grit |
| C. | 50 grit to 60 grit |
| D. | 80 grit to 600 grit |
| Answer» E. | |
| 8. |
Which of the following process have the lowest metal removal rate? |
| A. | Drilling |
| B. | Reaming |
| C. | Milling |
| D. | Lapping |
| Answer» C. Milling | |
| 9. |
Which of the following process has the lowest cutting speed? |
| A. | Drilling |
| B. | Honing |
| C. | Milling |
| D. | Turning |
| Answer» C. Milling | |
| 10. |
Which of the following is a surface finishing operation? |
| A. | Drilling |
| B. | Honing |
| C. | Milling |
| D. | Turning |
| Answer» C. Milling | |