MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 20 Mcqs, each offering curated multiple-choice questions to sharpen your Manufacturing Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Slotting can be performed more effectively by ______ milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | both horizontal and vertical |
| D. | none of the mentioned |
| Answer» D. none of the mentioned | |
| 2. |
Cutting T-slots can be performed more effectively by ______ milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 3. |
Angular milling can be performed more effectively by ______ milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» D. none of the mentioned | |
| 4. |
Straddle milling can be performed more effectively by ______ milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» B. vertical | |
| 5. |
Dovetailing can be performed more effectively by ______ milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 6. |
Boring can be performed more effectively by ______ milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 7. |
Drilling can be performed more effectively by ______ milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 8. |
Slab milling can be performed more effectively by ______ milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» B. vertical | |
| 9. |
Form cutting can be performed more effectively by ______ milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» B. vertical | |
| 10. |
surfacing can be performed more effectively by ______ milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 11. |
Shaping can be performed more effectively by ______ milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 12. |
WHICH_OF_THE_FOLLOWING_CUTTER_CAN_BE_USED_FOR_FINISHING_OFF_PREVIOUSLY_MILLED_SLOT??$ |
| A. | Key way milling cutter |
| B. | Dovetail milling cutter |
| C. | Saw milling cutter |
| D. | Slitting milling cutter |
| Answer» C. Saw milling cutter | |
| 13. |
In which of the following milling cutters, power requirement will increase slightly? |
| A. | Negative rake angle tool |
| B. | Positive rake angle tool |
| C. | Both positive and negative rake angle tool |
| D. | None of the mentioned |
| Answer» C. Both positive and negative rake angle tool | |
| 14. |
Which of the following operation can be used for parting of work piece in two pieces? |
| A. | Key way milling |
| B. | Groove milling |
| C. | Saw milling |
| D. | Straddle milling |
| Answer» D. Straddle milling | |
| 15. |
Which of the following milling operation can be used for producing grooves in work piece? |
| A. | Key way milling |
| B. | Groove milling |
| C. | Gang milling |
| D. | Straddle milling |
| Answer» C. Gang milling | |
| 16. |
Which of the following milling process is used for machining of a number of flat horizontal and vertical surfaces simultaneously using more than two cutters at the same time mounted on common arbor? |
| A. | Key way milling |
| B. | Groove milling |
| C. | Gang milling |
| D. | Straddle milling |
| Answer» D. Straddle milling | |
| 17. |
Which of the following milling process is used for machining of two parallel vertical surface of a job simultaneously? |
| A. | Key way milling |
| B. | Groove milling |
| C. | Gang milling |
| D. | Straddle milling |
| Answer» E. | |
| 18. |
Which of the following milling process is used for machining of irregular shapes? |
| A. | Slab milling |
| B. | Face milling |
| C. | Angular milling |
| D. | Form milling |
| Answer» E. | |
| 19. |
Which of the following milling operation can be used for machining of flat surface which is the right angle to the axis of cutter? |
| A. | Slab milling |
| B. | Face milling |
| C. | Angular milling |
| D. | Form milling |
| Answer» C. Angular milling | |
| 20. |
Which of the following milling operation can be used for machining a flat surface, parallel to the axis of cutter? |
| A. | Slab milling |
| B. | Face milling |
| C. | Angular milling |
| D. | Form milling |
| Answer» B. Face milling | |