MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 168 Mcqs, each offering curated multiple-choice questions to sharpen your Mechanical Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Slotting can be performed more effectively by milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | both horizontal and vertical |
| D. | none of the mentioned |
| Answer» D. none of the mentioned | |
| 2. |
Cutting T-slots can be performed more effectively by milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 3. |
Straddle milling can be performed more effectively by milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» B. vertical | |
| 4. |
Angular milling can be performed more effectively by milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» D. none of the mentioned | |
| 5. |
Dovetailing can be performed more effectively by milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 6. |
Boring can be performed more effectively by milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 7. |
Drilling can be performed more effectively by milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 8. |
Form cutting can be performed more effectively by milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» B. vertical | |
| 9. |
Slab milling can be performed more effectively by milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» B. vertical | |
| 10. |
Shaping can be performed more effectively by milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 11. |
The depth of cut is the distance measured from the machined surface to the surface of the work piece, which is uncut. |
| A. | parallel |
| B. | perpendicular |
| C. | at 45 degree |
| D. | none of the mentioned |
| Answer» C. at 45 degree | |
| 12. |
The directional properties are imparted to the castings made in foundries. |
| A. | single |
| B. | double |
| C. | spherical |
| D. | multiple |
| Answer» B. double | |
| 13. |
The energy consumption is a drawback of the foundry. |
| A. | high |
| B. | optimum |
| C. | intensive |
| D. | low |
| Answer» B. optimum | |
| 14. |
In type of manufacturing process, material is wasted. It is in the form of chips. |
| A. | machining process |
| B. | casting process |
| C. | joining process |
| D. | forming and shaping process |
| Answer» B. casting process | |
| 15. |
Expendable mold and permanent mold are the parts of manufacturing process. |
| A. | machining |
| B. | casting |
| C. | none of the mentioned |
| D. | joining |
| Answer» C. none of the mentioned | |
| 16. |
Approximate cost of sewerage project for a population of one [email protected] Rs. 10/- head works out as Rs. 10 lakh. |
| A. | true |
| B. | false |
| Answer» C. | |
| 17. |
The energy consumption is a drawback of the foundry. |
| A. | high |
| B. | optimum |
| C. | intensive |
| D. | low |
| Answer» B. optimum | |
| 18. |
A round billet made of 70-30 brass is extruded at a temperature of 675°C. The billet diameter is 125 mm, and the diameter of the extrusion is 50 mm. Calculate the extrusion force required. |
| A. | 4 mn |
| B. | 5 mn |
| C. | 5.6 mn |
| D. | none of the mentioned |
| Answer» D. none of the mentioned | |
| 19. |
Which of the following part of shaper supports the entire load of the machine? |
| A. | base |
| B. | crossrail |
| C. | frame |
| D. | none of the mentioned |
| Answer» B. crossrail | |
| 20. |
Slotting can be performed more effectively by              milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | both horizontal and vertical |
| D. | none of the mentioned |
| Answer» D. none of the mentioned | |
| 21. |
Cutting T-slots can be performed more effectively by              milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 22. |
Angular milling can be performed more effectively by              milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» D. none of the mentioned | |
| 23. |
Straddle milling can be performed more effectively by              milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» B. vertical | |
| 24. |
Dovetailing can be performed more effectively by              milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 25. |
Boring can be performed more effectively by              milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 26. |
Drilling can be performed more effectively by              milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 27. |
Slab milling can be performed more effectively by              milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» B. vertical | |
| 28. |
Form cutting can be performed more effectively by              milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» B. vertical | |
| 29. |
Shaping can be performed more effectively by              milling machine. |
| A. | horizontal |
| B. | vertical |
| C. | can’t say anything |
| D. | none of the mentioned |
| Answer» C. can’t say anything | |
| 30. |
Reaming and counter boring can be performed by |
| A. | centres |
| B. | face plates and angle plates |
| C. | special attachments |
| D. | none of the mentioned |
| Answer» C. special attachments | |
| 31. |
For lathe operations, work piece can be hold |
| A. | between centres |
| B. | on mandrel |
| C. | either between centres or on mandrel |
| D. | none of the mentioned |
| Answer» D. none of the mentioned | |
| 32. |
Which of the following represents the formula for the machining time? s=feed of the job per revolution, l=length of the job, n=rpm. |
| A. | l / (s*n) |
| B. | (s*n) / l |
| C. | (l*s) / n |
| D. | none of the mentioned |
| Answer» B. (s*n) / l | |
| 33. |
Which of the following represents the formula for the depth of cut? d1=diameter of work surface before machining and d2=diameter of the machined surface |
| A. | d1+d2 |
| B. | d1-d2 |
| C. | (d1+d2)/2 |
| D. | (d1-d2)/2 |
| Answer» E. | |
| 34. |
The depth of cut is the           distance measured from the machined surface to the surface of the work piece, which is uncut. |
| A. | parallel |
| B. | perpendicular |
| C. | at 45 degree |
| D. | none of the mentioned |
| Answer» C. at 45 degree | |
| 35. |
           is the distance the tool advances for each revolution of the work. |
| A. | feed |
| B. | depth of cut |
| C. | metal removal rate |
| D. | none of the mentioned |
| Answer» B. depth of cut | |
| 36. |
             is the speed at which the metal is removed by the tool from the work piece. |
| A. | feed |
| B. | cutting speed |
| C. | depth of cut |
| D. | none of the mentioned |
| Answer» C. depth of cut | |
| 37. |
Foundry process is used to make intricate parts. |
| A. | true |
| B. | false |
| Answer» B. false | |
| 38. |
The                directional properties are imparted to the castings made in foundries. |
| A. | single |
| B. | double |
| C. | spherical |
| D. | multiple |
| Answer» B. double | |
| 39. |
                             defects in castings cannot be identified easily. |
| A. | internal |
| B. | external |
| C. | chemical |
| D. | metallic |
| Answer» B. external | |
| 40. |
The                energy consumption is a drawback of the foundry. |
| A. | high |
| B. | optimum |
| C. | intensive |
| D. | low |
| Answer» B. optimum | |
| 41. |
In which of the following forging process poor material utilization occurs? |
| A. | open die |
| B. | closed die |
| C. | impression dies |
| D. | hold dies |
| Answer» B. closed die | |
| 42. |
In which of the forging process metal is kept in between a pair of dies and no gutter is provided in the lower die? |
| A. | open die |
| B. | closed die |
| C. | impression dies |
| D. | hold dies |
| Answer» D. hold dies | |
| 43. |
Forging is carried out at which temperature? |
| A. | below recrystallization temperature |
| B. | above recrystallization temperature |
| C. | below or above recrystallization temperature |
| D. | above melting point |
| Answer» D. above melting point | |
| 44. |
1 ESTIMATION OF DIFFERENT TYPES OF JOBS |
| A. | true |
| B. | false |
| Answer» C. | |
| 45. |
Estimating is the technique of calculating the various quantities and is needed for controlling the expenditure during the execution of the work. |
| A. | true |
| B. | false |
| Answer» B. false | |
| 46. |
Which of the following data is not required to prepare an estimate? |
| A. | amplitude |
| B. | drawings |
| C. | specifications |
| D. | rates |
| Answer» B. drawings | |
| 47. |
What is the main cause of accidents in urban areas? |
| A. | improper planning |
| B. | extra wide roads |
| C. | additional thickness of the pavement |
| D. | traffic congestion |
| Answer» B. extra wide roads | |
| 48. |
With the use of Jigs and fixture quality control expenses will |
| A. | reduce |
| B. | increases |
| C. | jigs and fixture are not used in any production process |
| D. | none of the mentioned |
| Answer» B. increases | |
| 49. |
With the use of Jigs and fixture total cost of production |
| A. | increases |
| B. | decreases |
| C. | remains same |
| D. | jigs are not used in any production process |
| Answer» C. remains same | |
| 50. |
In         type of manufacturing process, material is wasted. It is in the form of chips. |
| A. | machining process |
| B. | casting process |
| C. | joining process |
| D. | forming and shaping process |
| Answer» B. casting process | |