MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 17 Mcqs, each offering curated multiple-choice questions to sharpen your Manufacturing Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Brinell Hardness Number (BHN) for soft iron is between _____________ |
| A. | 1000-2000 |
| B. | 227-857 |
| C. | 67-500 |
| D. | 0-10 |
| Answer» D. 0-10 | |
| 2. |
Vickers hardness test has a scale range of _____________ |
| A. | 0 to 10 |
| B. | 100 to 200 |
| C. | 0 to 1000 |
| D. | 0 to 3000 |
| Answer» E. | |
| 3. |
Rockwell hardness test has a scale range of _________ |
| A. | 0 to 10 |
| B. | 100 to 200 |
| C. | 0 to 1000 |
| D. | 0 to 3000 |
| Answer» D. 0 to 3000 | |
| 4. |
Brinell hardness test has a scale range of _________ |
| A. | 0 to 10 |
| B. | 100 to 200 |
| C. | 0 to 1000 |
| D. | 0 to 3000 |
| Answer» E. | |
| 5. |
Mohs hardness test has a scale range of _________ |
| A. | 1 to 10 |
| B. | 100 to 200 |
| C. | 1 to 1000 |
| D. | 1 to 3000 |
| Answer» B. 100 to 200 | |
| 6. |
According to DIN standard, which of the following relation is correct about gauge length of cross section area ‘A’? |
| A. | L = 12.51\(\sqrt{A}\) |
| B. | L = 14.51\(\sqrt{A}\) |
| C. | L = 4\(\sqrt{A}\) |
| D. | L = 11.2\(\sqrt{A}\) |
| Answer» E. | |
| 7. |
According to BS standard, which of the following relation is correct about gauge length of cross section area ‘A’? |
| A. | L = 2.51\(\sqrt{A}\) |
| B. | L = 4.51\(\sqrt{A}\) |
| C. | L = 4\(\sqrt{A}\) |
| D. | L = 3.51\(\sqrt{A}\) |
| Answer» D. L = 3.51\(\sqrt{A}\) | |
| 8. |
According to ASTM standard, which of the following relation is correct about gauge length of cross section area ‘A’? |
| A. | L = 2.51\(\sqrt{A}\) |
| B. | L = 4.51\(\sqrt{A}\) |
| C. | L = 2\(\sqrt{A}\) |
| D. | L = 3.51\(\sqrt{A}\) |
| Answer» C. L = 2\(\sqrt{A}\) | |
| 9. |
ASTM stands for __________ |
| A. | American Society for Tensile Measurement |
| B. | American Society for Testing and Materials |
| C. | American Society for Tool Measurement |
| D. | American Society for Tensile Material |
| Answer» C. American Society for Tool Measurement | |
| 10. |
Hounsfield tensometer can be used to perform __________ |
| A. | Tensile test |
| B. | Compressive test |
| C. | Hardness test |
| D. | Toughness test |
| Answer» B. Compressive test | |
| 11. |
VICKER‚ÄÖ√Ñ√∂‚ÀÖ√Ë‚ÀÖ¬•S_HARDNESS_TEST_HAS_A_SCALE_RANGE_OF?$# |
| A. | 0 to 10 |
| B. | 100 to 200 |
| C. | 0 to 1000 |
| D. | 0 to 3000 |
| Answer» E. | |
| 12. |
Brinell_Hardness_Number_for_soft_iron_is_between$ |
| A. | 1000-2000 |
| B. | 227-857 |
| C. | 67-500 |
| D. | 0-10 |
| Answer» D. 0-10 | |
| 13. |
Brinell’s hardness test has a scale range of$ |
| A. | 0 to 10 |
| B. | 100 to 200 |
| C. | 0 to 1000 |
| D. | 0 to 3000 |
| Answer» E. | |
| 14. |
Mohs hardness test has a scale range of |
| A. | 0 to 10 |
| B. | 100 to 200 |
| C. | 0 to 1000 |
| D. | 0 to 3000 |
| Answer» B. 100 to 200 | |
| 15. |
According to ASTM standard, which of the following relation is correct about gauge length of cross section area ‘A’?$ |
| A. | l=2.51‚àöA |
| B. | l=4.51‚àöA |
| C. | l=2‚àöA |
| D. | l=3.51‚àöA |
| Answer» C. l=2‚Äö√Ñ√∂‚àö‚Ć‚àö‚àÇA | |
| 16. |
ASTM stands for |
| A. | American Society for Tensile Measurement |
| B. | American Society for Testing Material |
| C. | American Society for Tool Measurement |
| D. | American Society for Tensile Material |
| Answer» C. American Society for Tool Measurement | |
| 17. |
Hounsfield Tensometer can be used to perform |
| A. | Tensile test |
| B. | Compressive test |
| C. | Hardness test |
| D. | Toughness test |
| Answer» B. Compressive test | |