Explore topic-wise MCQs in Engineering.

In a ventilated disc brake,

The effect of having excess camber is

The co-efficient of rolling resistance for a truck weighing 63 500 N is 0.018. The rolling resistance to the truck is

The advantage of double-wishbone suspension design is that a large amount of freedom is available for setting geometry and precise settings can be made for driving comfort and steerability,

If the level of tension in the belt is too high, it can result in a loss of power or in bending of the rotating shaft or crankshaft.

If the air-fuel mixture ignites before the spark takes place at spark plug, the condition is called

The oil pump is driven by the

In a spark plug, when the temperature of the central electrode exceeds a certain temperature, any carbon that has adhered will be burnt off, and the temperature at which this burning off carbon starts is referred to as the self cleaning temperature.

Incorrect steering axis inclination (S.A.I.) causes

In a unit type body (frameless body) design, the sheet metal parts are welded together, forming a frame work to which outer skin is attached.

The torque available at the contact between driving wheels and road is known as

A traction control system (TCS) in automobiles controls the

In radial tyres

If the engine coolant leaks into the engine oil, then engine oil

The function of an alternator in an automobile is to

A clutch is usually designed to transmit maximum torque which is

What type of bearing is used for main bearings and connecting rod bearings ?

It is necessary to maintain the valve clearances as they

The vehicle ride will be comfortable if

The flywheel and the pressure plate bind the clutch disc between them so that the engine and the transmission can be engaged.

The main function of intake manifold is that it

The difference between DOT 3 and DOT 4 brake fluids is

The battery is an electrochemical device, which means battery

The operation of removing trapped air from the hydraulic braking system is known as

Positive camber is used to compensate for wheels tilting inward due to the weight of the vehicle.

If the air-fuel mixture in a spark ignition engine is too rich, then air-fuel ratio is about

The draft or taper allowance on casting is generally

Which of the following welding process uses non-consumable electrodes?

In a bilateral system of tolerance, the tolerance is allowed on

The blank diameter used in thread rolling will be

The cross-section of a chisel is usually

A plug gauge is used to check the diameter of shafts and studs.

In back-hand welding, the angle between the welding torch and the work is kept as

The centrifugal casting method, is used for casting articles of

The cold chisels are made by

The fullers are used

The property of sand due to which it evolves a great amount of steam and other gases is called

A baffle plate is fitted inside the oil pan to prevent the oil from splashing when it is subjected to vibration and other movement during vehicle operation.

The motion of the cam is transferred to the valves through

Which of the following symptom is caused as a result of brake disc run out ?

A taper provided on the pattern for its easy and clean withdrawl from the mould is known as