MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 29 Mcqs, each offering curated multiple-choice questions to sharpen your Optical Communication knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
The active layer of E-LED is heavily doped with ____________ |
| A. | Zn |
| B. | Eu |
| C. | Cu |
| D. | Sn |
| Answer» B. Eu | |
| 2. |
The InGaAsP is emitting LEDs are realized in terms of restricted are ____________ |
| A. | Length strip geometry |
| B. | Radiance |
| C. | Current spreading |
| D. | Coupled optical power |
| Answer» B. Radiance | |
| 3. |
Mesa structured SLEDs are used ____________ |
| A. | To reduce radiance |
| B. | To increase radiance |
| C. | To reduce current spreading |
| D. | To increase current spreading |
| Answer» D. To increase current spreading | |
| 4. |
The overall power conversion efficiency of electrical lens coupled LED is 0.8% and power applied 0.0375 V. Determine optical power launched into fiber. |
| A. | 0.03 |
| B. | 0.05 |
| C. | 0.3 |
| D. | 0.01 |
| Answer» B. 0.05 | |
| 5. |
Determine the overall power conversion efficiency of lens coupled SLED having forward current of 20 mA and forward voltage of 2 V with 170 μWof optical power launched into multimode step index fiber. |
| A. | 1.256*10-5 |
| B. | 4.417*102 |
| C. | 4.25*10-3 |
| D. | 2.14*10-3 |
| Answer» D. 2.14*10-3 | |
| 6. |
In a multimode fiber, much of light coupled in the fiber from an LED is ____________ |
| A. | Increased |
| B. | Reduced |
| C. | Lost |
| D. | Unaffected |
| Answer» D. Unaffected | |
| 7. |
Estimate optical power coupled into fiber of DH SLED having emission area of 1.96*10-5, radiance of 40 W/rcm2, numerical aperture of 0.2 and Fresnel reflection coefficient of 0.03 at index matched fiber surface. |
| A. | 5.459*10-5 |
| B. | 1.784*10-3 |
| C. | 3.478*102 |
| D. | 9.551*10-5 |
| Answer» E. | |
| 8. |
A DH surface emitter LED has an emission area diameter of 60μm. Determine emission area of source. |
| A. | 1.534*10-6 |
| B. | 5.423*10-3 |
| C. | 3.564*10-2 |
| D. | 2.826*10-9 |
| Answer» E. | |
| 9. |
DH surface emitter generally give ____________ |
| A. | More coupled optical power |
| B. | Less coupled optical power |
| C. | Low current densities |
| D. | Low radiance emission into-fiber |
| Answer» B. Less coupled optical power | |
| 10. |
Internal absorption in DH surface emitter Burros type LEDs is ____________ |
| A. | Cannot be determined |
| B. | Negligible |
| C. | High |
| D. | Very low |
| Answer» E. | |
| 11. |
In surface emitter LEDs, more advantage can be obtained by using ____________ |
| A. | BH structures |
| B. | QC structures |
| C. | DH structures |
| D. | Gain-guided structure |
| Answer» D. Gain-guided structure | |
| 12. |
As compared to planar LED structure, Dome LEDs have ______________ External power efficiency ___________ effective emission area and _____________ radiance. |
| A. | Greater, lesser, reduced |
| B. | Higher, greater, reduced |
| C. | Higher, lesser, increased |
| D. | Greater, greater, increased |
| Answer» C. Higher, lesser, increased | |
| 13. |
In optical fiber communication _____________ major types of LED structures are used. |
| A. | 2 |
| B. | 4 |
| C. | 6 |
| D. | 3 |
| Answer» D. 3 | |
| 14. |
The amount of radiance in planer type of LED structures is ____________ |
| A. | Low |
| B. | High |
| C. | Zero |
| D. | Negligible |
| Answer» B. High | |
| 15. |
ESTIMATE_OPTICAL_POWER_COUPLED_INTO_FIBER_OF_DH_SLED_HAVING_EMISSION_AREA_OF_1.96*10-5,_RADIANCE_OF_40_W/RCM2,_NUMERICAL_APERTURE_OF_0.2_AND_FRESNEL_REFLECTION_COEFFICIENT_OF_0.03_AT_INDEX_MATCHED_FIBER_SURFACE.?$ |
| A. | 5.459*10<sup>-5</sup> |
| B. | 1.784*10<sup>-3</sup> |
| C. | 3.478*10<sup>2</sup> |
| D. | 9.551*10<sup>-5</sup> |
| Answer» E. | |
| 16. |
Determine the overall power conversion efficiency of lens coupled SLED having forward current of 20 mA and forward voltage of 2 V with 170 μWof optical power launched into multimode step index fiber.$# |
| A. | 1.256*10<sup>-5</sup> |
| B. | 4.417*10<sup>2</sup> |
| C. | 4.25*10<sup>-3</sup> |
| D. | 2.14*10<sup>-3</sup> |
| Answer» D. 2.14*10<sup>-3</sup> | |
| 17. |
In_a_multimode_fiber,_much_of_light_coupled_in_the_fiber_from_an_LED_is$ |
| A. | Increased |
| B. | Reduced |
| C. | Lost |
| D. | Unaffected |
| Answer» D. Unaffected | |
| 18. |
The active layer of E-LED is heavily doped with |
| A. | Zn |
| B. | Eu |
| C. | Cu |
| D. | Sn |
| Answer» B. Eu | |
| 19. |
The InGaAsP is emitting LEDs are realized in terms of restricted |
| A. | Length strip geometry |
| B. | Radiance |
| C. | Current spreading |
| D. | Coupled optical power |
| Answer» B. Radiance | |
| 20. |
Mesa structured SLEDs are used |
| A. | To reduce radiance |
| B. | To increase radiance |
| C. | To reduce current spreading |
| D. | To increase current spreading |
| Answer» D. To increase current spreading | |
| 21. |
The_overall_power_conversion_efficiency_of_electrical_lens_coupled_LED_is_0.8%_and_power_applied_0.0375_V._Determine_optical_power_launched_into_fiber |
| A. | 0.03 |
| B. | 0.05 |
| C. | 0.3 |
| D. | 0.01 |
| Answer» B. 0.05 | |
| 22. |
A DH surface emitter LED has an emission area diameter of 60μm. Determine emission area of sourc?# |
| A. | 1.534*10<sup>-6</sup> |
| B. | 5.423*10<sup>-3</sup> |
| C. | 3.564*10<sup>-2</sup> |
| D. | 2.826*10<sup>-9</sup> |
| Answer» E. | |
| 23. |
DH surface emitter generally give |
| A. | More coupled optical power |
| B. | Less coupled optical power |
| C. | Low current densities |
| D. | Low radiance emission into-fiber |
| Answer» B. Less coupled optical power | |
| 24. |
Internal absorption in DH surface emitter Burros type LEDs is |
| A. | Cannot be determined |
| B. | Negligible |
| C. | High |
| D. | Very low |
| Answer» E. | |
| 25. |
In surface emitter LEDs, more advantage can be obtained by using |
| A. | BH structures |
| B. | QC structures |
| C. | DH structures |
| D. | Gain-guided structure |
| Answer» D. Gain-guided structure | |
| 26. |
The techniques by Burros and Dawson in reference to homo structure device is to use an etched well in GaAs structure. Determine the given statement is True or false. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 27. |
As compared to planar LED structure, Dome LEDs have ______________ External power efficiency, ____________ effective emission area and _____________ radiance. |
| A. | Greater, lesser, reduced |
| B. | Higher, greater, reduced |
| C. | Higher, lesser, increased |
| D. | Greater, greater, increased |
| Answer» C. Higher, lesser, increased | |
| 28. |
In optical fiber communication, ______________ major types of LED structures are used |
| A. | 2 |
| B. | 4 |
| C. | 6 |
| D. | 3 |
| Answer» D. 3 | |
| 29. |
The amount of radiance in planer type of LED structures is |
| A. | Low |
| B. | High |
| C. | Zero |
| D. | Negligible |
| Answer» B. High | |