 
			 
			MCQOPTIONS
 Saved Bookmarks
				This section includes 19 Mcqs, each offering curated multiple-choice questions to sharpen your Analytical Instrumentation knowledge and support exam preparation. Choose a topic below to get started.
| 1. | Given below is the diagram of glass electrode. Identify the unmarked component. | 
| A. | Platinum leads | 
| B. | Silver wire coated with silver chloride | 
| C. | Copper wire | 
| D. | Platinum reference electrode | 
| Answer» C. Copper wire | |
| 2. | The pH response of glass electrode is limited entirely to the area of the special glass membrane bulb. | 
| A. | True | 
| B. | False | 
| Answer» B. False | |
| 3. | Which of the following cannot form the inner reference electrode in glass electrodes? | 
| A. | Silver electrode | 
| B. | Copper electrode | 
| C. | Calomel electrode | 
| D. | Silver chloride electrode | 
| Answer» C. Calomel electrode | |
| 4. | Which of the following is the purpose of added membranes in the glass membrane of the glass electrode? | 
| A. | They act as tightners | 
| B. | They act as filters | 
| C. | They act as conditioners | 
| D. | They act as collectors | 
| Answer» B. They act as filters | |
| 5. | The composition of glass membrane in glass electrode cannot have which of the following? | 
| A. | Sodium silicate | 
| B. | Calcium silicate | 
| C. | Lithium silicate | 
| D. | Barium silicate | 
| Answer» E. | |
| 6. | Given below is a diagram of hydrogen electrode. Identify the unmarked component. | 
| A. | Hydrogen at 1 atm | 
| B. | Hydrogen at 10 atm | 
| C. | Helium at 1 atm | 
| D. | Helium at 10 atm | 
| Answer» B. Hydrogen at 10 atm | |
| 7. | THE_COMPOSITION_OF_GLASS_MEMBRANE_IN_GLASS_ELECTRODE_CANNOT_HAVE_WHICH_OF_THE_FOLLOWING??$ | 
| A. | Sodium silicate | 
| B. | Calcium silicate | 
| C. | Lithium silicate | 
| D. | Barium silicate | 
| Answer» E. | |
| 8. | Which of the following cannot form the inner reference electrode in glass electrodes?$ | 
| A. | Silver electrode | 
| B. | Copper electrode | 
| C. | Calomel electrode | 
| D. | Silver chloride electrode | 
| Answer» C. Calomel electrode | |
| 9. | Which_of_the_following_is_the_purpose_of_added_membranes_in_the_glass_membrane_of_the_glass_electrode?$ | 
| A. | They act as tightners | 
| B. | They act as filters | 
| C. | They act as conditioners | 
| D. | They act as collectors | 
| Answer» B. They act as filters | |
| 10. | Which of the following is not the disadvantage of glass electrodes? | 
| A. | Poor readings are obtained in buffered or unbuffered solutions | 
| B. | The electrode must be washed thoroughly with distilled water to obtain proper results | 
| C. | Materials suspended on glass should be wiped out neatly to obtain proper results | 
| D. | It is affected by oxidation reduction potentials in the solution | 
| Answer» E. | |
| 11. | Which of the following is not the advantage of glass electrodes? | 
| A. | It gives accurate results for high as well as low pH values | 
| B. | It is simple to operate | 
| C. | It has no salt error | 
| D. | Modern electrodes can withstand severe treatment | 
| Answer» B. It is simple to operate | |
| 12. | The_pH_response_of_glass_electrode_is_limited_entirely_to_the_area_of_the_special_glass_membrane_bulb. | 
| A. | True | 
| B. | False | 
| Answer» B. False | |
| 13. | If hydrogen electrode acts as cathode, hydrogen is reduced. | 
| A. | True | 
| B. | False | 
| Answer» B. False | |
| 14. | Hydrogen electrode which is the reference electrode can be used as which of the following? | 
| A. | Anode only | 
| B. | Cathode only | 
| C. | Anode or Cathode | 
| D. | Salt bridge | 
| Answer» D. Salt bridge | |
| 15. | In Hydrogen electrode, the electrode is placed in a solution of ____ M Hcl. Fill in the blank. | 
| A. | 0.5 | 
| B. | 1 | 
| C. | 2 | 
| D. | 3 | 
| Answer» C. 2 | |
| 16. | Which of the following is not the disadvantage of hydrogen electrode? | 
| A. | Platinum can be easily poisoned | 
| B. | Presence of oxidising agents alters the potential | 
| C. | It gives salt error | 
| D. | H2 gas at 1 atmospheric pressure is difficult to set up and transport | 
| Answer» D. H2 gas at 1 atmospheric pressure is difficult to set up and transport | |
| 17. | Which of the following is the simple and most convenient hydrogen electrode? | 
| A. | Pascal Hydrogen electrode | 
| B. | Bourne Hydrogen electrode | 
| C. | Hilderbant Hydrogen electrode | 
| D. | West Hydrogen electrode | 
| Answer» D. West Hydrogen electrode | |
| 18. | Why is Standard hydrogen electrode called as the primary reference electrode? | 
| A. | It has a known output potential | 
| B. | It has a constant output potential | 
| C. | Its output potential is independent of the composition of the solution | 
| D. | Its output potential is zero volts | 
| Answer» E. | |
| 19. | Which of the following is not the characteristic of a reference electrode? | 
| A. | It must have a known output potential | 
| B. | It must have a constant output potential | 
| C. | Its output potential is dependent on the composition of the solution | 
| D. | It is employed in conjunction with the indicator or working electrode | 
| Answer» D. It is employed in conjunction with the indicator or working electrode | |