

MCQOPTIONS
Saved Bookmarks
This section includes 1177 Mcqs, each offering curated multiple-choice questions to sharpen your Electronics knowledge and support exam preparation. Choose a topic below to get started.
351. |
Two bulbs are marked 100W/220V and 40W/220V. Which bulb will have more resistance? |
A. | 40W Bulb |
B. | 100W Bulb |
C. | both will have the same resistance |
D. | none of the suitable |
Answer» B. 100W Bulb | |
352. |
Find the direction of the magnetic field around the conductor? |
A. | by the law of cork screw |
B. | by left hand rule |
C. | by right hand rule |
D. | by Farad's law |
Answer» E. | |
353. |
When screen coils are used for central winding in a motor, the safest method is? |
A. | Kundali group number for one veshana |
B. | Soldering the End Connections of a Concentric Coil Set |
C. | first wrapping the coils and then trapping them in the grooves |
D. | Testing the suitability of size by trapping a group of concentric coils in slots |
Answer» E. | |
354. |
From the current voltage in the capacitor? |
A. | 180॰ angle forward |
B. | 90॰ angle lags behind |
C. | 90॰ angle forward |
D. | 180॰ angle lags behind |
Answer» D. 180॰ angle lags behind | |
355. |
What is an insulating dielectric used in electric heaters? |
A. | asbestos |
B. | ceramic |
C. | glass wool |
D. | asbestos |
Answer» C. glass wool | |
356. |
What is the break down potential of germanium? |
A. | 0.75 eV |
B. | 7.5 eV |
C. | 0.6 eV |
D. | 19.6 eV |
Answer» B. 7.5 eV | |
357. |
On which meter is cos written? |
A. | on watt meter |
B. | on frequency meter |
C. | on power factor meter |
D. | suitable at all |
Answer» D. suitable at all | |
358. |
In which type of washing machine the drum itself rotates to wash the loaded clothes? |
A. | Pulsator Type |
B. | stirrer type |
C. | deflection jet type |
D. | tumbler type |
Answer» E. | |
359. |
If any rectifier equipment is to be used for battery charging, then the rectifier should be selected on the following basis? |
A. | power rating |
B. | Voltage u0026 Current Rating |
C. | voltage rating |
D. | ampere-hour rating |
Answer» C. voltage rating | |
360. |
Transmission line regulation? |
A. | Inductance increases as the value of the power factor of the load decreases |
B. | The capacitance decreases when the value of the power factor of the load is reduced. |
C. | both suitable |
D. | none of the suitable |
Answer» D. none of the suitable | |
361. |
The number of slippings in a 9-phase rotary converter is |
A. | 9 |
B. | 11 |
C. | 12 |
D. | 13 |
Answer» B. 11 | |
362. |
In the transmission line, the drivers are often transferred, by doing so? |
A. | induced in the transmission line. Forces dissipate by splitting into opposing forces |
B. | Echoes and noises from the transmitted sound in the transmission line are reduced |
C. | Balanced current flow in line conductors |
D. | suitable all |
Answer» E. | |
363. |
HPMV is loaded in the lamp? |
A. | Mercury and Hydrogen |
B. | mercury and neon |
C. | mercury and argon |
D. | mercury and oxygen |
Answer» D. mercury and oxygen | |
364. |
What is the method to remove the stroboscopic effect in a fluorescent tube? |
A. | use of resistance |
B. | Use of choke |
C. | Using Capacitor With Glow Starter |
D. | low voltage operation |
Answer» D. low voltage operation | |
365. |
What is the length of a short transmission line? |
A. | up to 80 km |
B. | 80km to 250km |
C. | more than 250 km |
D. | 250 km |
Answer» B. 80km to 250km | |
366. |
What does a KVAR meter measure? |
A. | To the frequency of the AC circuit |
B. | Of the wattless component of the DC circuit |
C. | Of the wattless component of the AC circuit |
D. | To the power factor of the AC circuit |
Answer» D. To the power factor of the AC circuit | |
367. |
What is the normal length of a 40 Watt fluorescent tube? |
A. | 72 CM |
B. | 120 CM |
C. | 40 CM |
D. | 15 CM |
Answer» C. 40 CM | |
368. |
3 While winding the motor |
A. | Note the type of insulated |
B. | note the connection |
C. | note old data |
D. | suitable all |
Answer» E. | |
369. |
What is the full name of MB type lamp? |
A. | Mercury Booster Lamp |
B. | Mercury Bayonet Cap Type |
C. | mercury brake lamp |
D. | suitable all |
Answer» C. mercury brake lamp | |
370. |
What is the function of choke used in fluorescent tube? |
A. | limit the flow |
B. | improve power factor |
C. | Starting the tube |
D. | heat source |
Answer» B. improve power factor | |
371. |
In the metric system the size of super enamelled copper wire is expressed as? |
A. | resistance in ohms |
B. | diameter in mm |
C. | in number of drivers |
D. | Cross-sectional area in mm2 |
Answer» C. in number of drivers | |
372. |
In a transformer primary and secondary coils are coupled? |
A. | mechanical |
B. | Electrical |
C. | magnetic |
D. | none of these |
Answer» D. none of these | |
373. |
Which transformer is used in the spoiler? |
A. | current transformer |
B. | power transformer |
C. | distributor transformer |
D. | auto transformer |
Answer» E. | |
374. |
Digital Voltmeter (DVM) displays? |
A. | peak to peak मान |
B. | r.m.s (r.m.s. value |
C. | peak value |
D. | average value |
Answer» E. | |
375. |
Is a coating winding done? |
A. | 3ɸ in motor |
B. | 1 in motor stator |
C. | in armature |
D. | suitable in all |
Answer» D. suitable in all | |
376. |
Cheapest way to start a single clean motor? |
A. | starting resistance |
B. | inductive starting |
C. | Capacitor starting |
D. | none of these |
Answer» D. none of these | |
377. |
Electron gun is the main part of? |
A. | of cathode ray isoloscope |
B. | of transistor tester |
C. | of single generator |
D. | all these |
Answer» B. of transistor tester | |
378. |
Repulsion motor is similar to which motor in characteristics? |
A. | slip ring motor |
B. | range motor |
C. | compound motor |
D. | none of these |
Answer» C. compound motor | |
379. |
Fluorescent tubes are used for tube installation. |
A. | starter holder |
B. | tube holder |
C. | connector |
D. | none of these |
Answer» C. connector | |
380. |
Battery electrode? |
A. | must be semiconductor |
B. | must be a poor conductor of electricity |
C. | Must be a good conductor of electricity |
D. | none of these |
Answer» D. none of these | |
381. |
What is rotor speed called? |
A. | by pyrometer |
B. | by tachometer |
C. | by multimeter |
D. | by mager |
Answer» C. by multimeter | |
382. |
Metal Plate The metal used in the basket? |
A. | copper oxide and copper |
B. | zinc chloride and carbon |
C. | germanium and silicon |
D. | none of these |
Answer» B. zinc chloride and carbon | |
383. |
What is an instrument to measure electric pressure? |
A. | ampere meter |
B. | Watt meter |
C. | voltmeter |
D. | power multiplier meter |
Answer» D. power multiplier meter | |
384. |
A repulsion start induction run motor operates like an induction motor when |
A. | stator connections are reversed |
B. | Brushes shift to neutral plane |
C. | Commutator segments get short-circuited |
D. | A device used to short circuit |
Answer» D. A device used to short circuit | |
385. |
To increase the output of the alternator will increase |
A. | Speed |
B. | fuel |
C. | field excitement |
D. | number of poles |
Answer» C. field excitement | |
386. |
Suitable motor for air compressor? |
A. | repulsion motor |
B. | universal motor |
C. | Capacitor-Start, Capacitor-Run Motor |
D. | shaded pole motor |
Answer» D. shaded pole motor | |
387. |
Damper winding is done? |
A. | to increase speed |
B. | to reduce efficiency |
C. | for the motor to self start |
D. | suitable all |
Answer» D. suitable all | |
388. |
Synchronous motor is a very useful machine for industrial work because? |
A. | Power multiplier unit can be done if required |
B. | If this supply frequency is constant, then the motor runs at a constant speed on all loads. |
C. | It improves the power factor of the entire establishment |
D. | all of the above |
Answer» E. | |
389. |
How do three phase induction motors work in general? |
A. | At 0.8 Lead Power Factor |
B. | at 0.8 leg power factor |
C. | 1 (unit) |
D. | at 0.6 leg power factor |
Answer» C. 1 (unit) | |
390. |
Which motor is used for unit power factor? |
A. | charge |
B. | cage rotor induction motor |
C. | slip-ring induction motor |
D. | Hysteresis motor |
Answer» B. cage rotor induction motor | |
391. |
Can the direction of the motor of a permanent capacitor be changed? |
A. | Replacing Capacitor Wires |
B. | replacing supply wires |
C. | By changing the wires of the auxiliary winding |
D. | suitable all |
Answer» D. suitable all | |
392. |
Excited is that? |
A. | which excites the stator |
B. | which excites both rotor and stator |
C. | that excites the rotor |
D. | none of the suitable |
Answer» D. none of the suitable | |
393. |
get neutral? |
A. | by delta connection |
B. | in parallel |
C. | from star connection |
D. | none of the suitable |
Answer» D. none of the suitable | |
394. |
What is the power factor of a circuit known as? |
A. | by power factor meter |
B. | by ampere-meter |
C. | by voltmeter |
D. | by phase sequence indicator |
Answer» B. by ampere-meter | |
395. |
Air gap under Interpol compared to air gap under field poles? |
A. | less in generators and more in motors |
B. | More in generators and less in motors |
C. | in both generators and motors |
D. | Both generators and motors have less |
Answer» D. Both generators and motors have less | |
396. |
If back e in dc motor |
A. | motor will burn |
B. | motor will run at very high speed |
C. | motor won't run |
D. | motor will run at very slow speed |
Answer» B. motor will run at very high speed | |
397. |
Should wiring be done in an industrial setting? |
A. | PVC Casing-Capping Wiring |
B. | conduit wiring |
C. | cleat wiring |
D. | batten wiring |
Answer» C. cleat wiring | |
398. |
To the neutral point of the transformer? |
A. | should be associated with meaning |
B. | should not add to the meaning |
C. | both wrong |
D. | none of the suitable |
Answer» B. should not add to the meaning | |
399. |
The material used for the core of a transformer operating at high frequency will be |
A. | silicon steel |
B. | Carbon |
C. | ferrite |
D. | copper |
Answer» D. copper | |
400. |
On starting a series motor without load? |
A. | bank emf decreases |
B. | speed increases rapidly |
C. | torque increases sharply |
D. | The current drawn increases with intensity |
Answer» C. torque increases sharply | |