Explore topic-wise MCQs in Chemical Engineering.

This section includes 288 Mcqs, each offering curated multiple-choice questions to sharpen your Chemical Engineering knowledge and support exam preparation. Choose a topic below to get started.

51.

A fertiliser contains 82% N₂. It could be

A. Urea
B. Liquid NH₃
C. Ammonium nitrate
D. None of these
Answer» C. Ammonium nitrate
52.

A nitrogenous fertiliser contains 20% N₂. It could be

A. Ammonium nitrate
B. Calcium ammonium nitrate (CAN)
C. Urea
D. Ammonium chloride
Answer» C. Urea
53.

(CH₃ C₆ H₄)₃ PO₄ is the chemical formula of

A. Triple superphosphate
B. Tricresyl phosphate
C. Flourapatite
D. Superphosphate
Answer» C. Flourapatite
54.

H₃PO₄ is the chemical formula of __________ phosphoric acid.

A. Pyro
B. Ortho
C. Meta
D. None of these
Answer» C. Meta
55.

Temperature and pressure in urea autoclave is

A. 120°C and 300 atm
B. 190°C and 200 atm
C. 400°C and 550 atm
D. 200°C and 10 atm
Answer» C. 400°C and 550 atm
56.

Which fertiliser is made (using coke oven gas) in by products plant of an integrated steel plant?

A. Urea
B. CAN
C. Ammonium sulphate
D. Superphosphate
Answer» D. Superphosphate
57.

HPO₃ is the chemical formula of __________ phosphoric acid.

A. Pyro
B. Ortho
C. Meta
D. None of these
Answer» D. None of these
58.

P₂O₅ percentage in the phosphoric acid produced by wet process is about

A. 10
B. 30
C. 50
D. 70
Answer» C. 50
59.

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH₃ to NO is about __________ percent.

A. 38
B. 68
C. 82
D. 98
Answer» E.
60.

Conversion of yellow phosphorus to red phosphorous is done in retorts at 250-450°C in the

A. Presence of an inert atmosphere
B. Presence of a reducing atmosphere
C. Absence of air
D. Presence of an oxidising atmosphere
Answer» D. Presence of an oxidising atmosphere
61.

Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N₂ & H₂ is high. The presence of promoter along with the catalyst helps in __________ of the catalyst.

A. Stabilisation
B. Increasing the effectiveness
C. Improving the strength & heat resistance
D. All of the above
Answer» E.
62.

H₄P₂O₇ is the chemical formula of __________ phosphoric acid.

A. Pyro
B. Ortho
C. Meta
D. None of these
Answer» B. Ortho
63.

Which nutrient in fertiliser makes the plant stems stronger and increases branching?

A. Nitrogen
B. Phosphorous
C. Potassium
D. Calcium
Answer» C. Potassium
64.

Which of the following is not a mixed fertiliser?

A. Nitrophosphate
B. Calcium ammonium nitrate (CAN)
C. Ammonium phosphate
D. None of these
Answer» C. Ammonium phosphate
65.

Which of the following solvents is used for the extraction of H₃PO₄ from CaCl₂ solution during manufacture of ortho-phosphoric acid by wet process employing hydrochloric acid leaching?

A. Iso propyl alcohol
B. Butyl alcohol
C. Toluene
D. Hexane
Answer» C. Toluene
66.

Which of the following is a natural inorganic fertiliser?

A. Chile salt petre
B. Oilcake
C. Gobar mannure
D. None of these
Answer» B. Oilcake
67.

In the manufacture of orthophosphoric acid by strong H₂SO₄ leaching wet process, keeping the reactor temperature above 100°C, results in the formation of undesriable

A. CaSO₄ .½H₂O and CaSO₄ crystals
B. Pyrophosphoric acid
C. Metaphosphoric acid
D. All of the above
Answer» B. Pyrophosphoric acid
68.

Raw materials required for the production of CAN (Calcium ammonium nitrate) is NH₃

A. HNO₃ & limestone
B. CO₂ & H₂SO₄
C. HNO₃ & NH₄Cl
D. CO₂ & KNO₃
Answer» B. CO₂ & H₂SO₄
69.

An increase in the NH₃/CO₂ ratio in urea manufacture results in

A. Increased degree of conversion of CO₂ to urea
B. Decreased degree of conversion of NH₃ to urea
C. Decreased yield of urea
D. Decreased specific volume of molten mass
Answer» B. Decreased degree of conversion of NH₃ to urea
70.

Conversion achieved in HNO₃ synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by

A. Decreasing the pressure
B. Decreasing the temperature
C. Increasing the temperature
D. None of these
Answer» D. None of these
71.

Which is the best fertiliser for paddy?

A. Ammonium sulphate
B. Nitro-phosphate
C. Superphosphate
D. Potassium nitrate
Answer» B. Nitro-phosphate
72.

CO₂ present in reformed gas (obtained by steam reforming of naphtha) is removed by absorbing in

A. Mono-ethanolamine (MEA)
B. Slaked lime
C. Ammoniacal liquor
D. Methyl-Ethyl Ketone (MEK)
Answer» B. Slaked lime
73.

Which of the following nitrogenous fertilisers has the highest percentage of nitrogen?

A. Calcium nitrate
B. Calcium ammonium nitrate (CAN)
C. Urea
D. Ammonium sulphate
Answer» D. Ammonium sulphate
74.

Optimum reaction temperature in steam reforming of naphtha is __________ °C.

A. 700 - 1000
B. 300 - 450
C. 1500-1700
D. 100-200
Answer» B. 300 - 450
75.

Catalyst used in the manufacture of NH₃ by Haber's process is finely divided

A. Nickel
B. Iron
C. Vanadium pentoxide
D. Alumina
Answer» C. Vanadium pentoxide
76.

In the manufacture of H₃ PO₄ (ortho), ; strong H₂ SO₄ leaching wet process as compared to electric furnace process

A. Uses lower grade phosphate rock
B. Requires lower capital investment in the plant
C. Produces lower purity acid
D. Is very costly
Answer» D. Is very costly
77.

Reaction of phosphate rock with 98% H₂SO₄ produces

A. Orthophosphoric acid
B. Superphosphate
C. White phosphorous
D. None of these
Answer» B. Superphosphate
78.

P₂O₅ content in superphosphate is about __________ percent.

A. 30-35
B. 15-20
C. 65-70
D. 85-90
Answer» C. 65-70
79.

P₂O₅ content in triple superphosphate is about __________ percent.

A. 42-50
B. 15-20
C. 85-90
D. 70-75
Answer» B. 15-20
80.

Triple superphosphate which contains about 46% P₂O₅ is produced by the reaction of phosphate rock with ortho phosphoric acid of____percent concentration.

A. 25-28
B. 52-54
C. 75-80
D. > 98
Answer» C. 75-80
81.

Promoter used in NH₃ synthesis catalyst is

A. K₂O
B. SiO₃
C. V₂O₅
D. U₂O₃
Answer» D. U₂O₃
82.

In ammonia synthesis (N₂ + 3H₂ = 2NH₃), there is a decrease in total volume, hence to get high equilibrium conversion, the reaction should be carried out at

A. Low pressure
B. High pressure
C. Very high temperature
D. Atmospheric pressure; as the pressure has no effect on conversion
Answer» C. Very high temperature
83.

A phosphatic fertiliser contains 16% P₂O₅. It could be

A. Dicalcium phosphate
B. Superphosphate
C. Triple superphosphate
D. None of these
Answer» C. Triple superphosphate
84.

Which of the following gasifiers can be attached to coal based fertiliser plants?

A. Lurgi (high pressure) gasifier
B. Kopper-Totzek gasifier
C. Gasifier working at 20 atm
D. Gasifier working at 40 atm
Answer» C. Gasifier working at 20 atm
85.

Multistage operation (as in the case of catalytic oxidation of SO₂) is not carried out for NH₃ synthesis, because of

A. Comparatively higher pressure drop
B. High cost of the high pressure vessel used for the reactor
C. Higher pumping cost
D. Chances of entrainment and disturbance of catalyst bed
Answer» C. Higher pumping cost
86.

A potassic fertiliser contains 50% K₂O. It could be

A. Potassium sulphate
B. Potassium chloride
C. A mixture of NaCl+ KCl
D. None of these
Answer» B. Potassium chloride
87.

Heating of orthophosphoric acid to about 900°C, produces

A. Metaphosphoric acid
B. Pyrophosphoric acid
C. No change in it
D. None of these
Answer» B. Pyrophosphoric acid
88.

Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature$

A. rate of reaction is very low.
B. very high pressure is required resulting in costly pressure vessel.
C. space velocity of gas is very low resulting in decreased conversion.
D. none of these
Answer» B. very high pressure is required resulting in costly pressure vessel.
89.

Biuret formation in urea is kept at minimum (< 1 %), because it is

A. corrosive in nature.
B. toxic and harmful to some crops.
C. helpful in decomposition of urea.
D. explosive in nature.
Answer» C. helpful in decomposition of urea.
90.

Optimum reaction temperature in steam reforming of naphtha is __________ °C.$

A. 700 - 1000
B. 300 - 450
C. 1500-1700
D. 100-200
Answer» B. 300 - 450
91.

Effectiveness of a fertiliser is independent of the

A. nature of soil
B. type of crop
C. pH of soil
D. none of these
Answer» E.
92.

Hydrogen is recovered from coke oven gas on commercial scale (as practised in fertiliser plant at Rourkela) by

A. adsorption on palladium.
B. cryogenic operations (low temperature cooling).
C. absorption (using ethanolamine or pyragalloll solution).
D. none of these.
Answer» C. absorption (using ethanolamine or pyragalloll solution).
93.

Temperature and pressure in ammonia converter is

A. 200 atm, 1000°C
B. 450 atm, 200°C
C. 450 atm, 550°C
D. 450 atm, 1000°C
Answer» D. 450 atm, 1000¬∞C
94.

In ammonia synthesis (N2 + 3H2 = 2NH3), there is a decrease in total volume, hence to get high equilibrium conversion, the reaction should be carried out at

A. low pressure.
B. high pressure.
C. very high temperature.
D. atmospheric pressure; as the pressure has no effect on conversion.
Answer» C. very high temperature.
95.

In natural gas, the C/H ratio (by weight) varies in the range of

A. 43558
B. 43746
C. 15-17
D. 20-25
Answer» B. 43746
96.

Nitrogen content of urea is about __________ percent.

A. 10
B. 46
C. 80
D. 94
Answer» C. 80
97.

Reaction of __________ acid with phosphate rock produces superphosphates.

A. hydrochloric
B. sulphuric
C. nitric
D. phosphoric
Answer» C. nitric
98.

Raw materials for urea production are

A. CO2 and N2
B. CO2, H2 and N2
C. NH3 and CO
D. HNO3 and CaCO3
Answer» C. NH3 and CO
99.

Which of the following fertilisers is required for the development of fibrous materials of the plants and of the sugar of vegetable & fruits ?

A. Nitrogenous fertilisers
B. Phosphatic fertilisers
C. Potassic fertiliser
D. None of these
Answer» D. None of these
100.

Which nutrient in fertiliser makes the plant stems stronger and increases branching ?

A. Nitrogen
B. Phosphorous
C. Potassium
D. Calcium
Answer» C. Potassium