MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 487 Mcqs, each offering curated multiple-choice questions to sharpen your Civil Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
The position of picture plane relative to the object is independent of a size of perspective view. |
| A. | true |
| B. | false |
| Answer» C. | |
| 2. |
The perspectives of concentric circles are not concentric |
| A. | circles |
| B. | ellipses |
| C. | spheres |
| D. | ellipsoids |
| Answer» C. spheres | |
| 3. |
Curve of any shape can be drawn in perspective by enclosing it in a |
| A. | rectangle |
| B. | cube |
| C. | cylinder |
| D. | square |
| Answer» B. cube | |
| 4. |
The perspective view of a circle in any type of typical position be |
| A. | circle |
| B. | ellipse |
| C. | oval |
| D. | lemniscate |
| Answer» C. oval | |
| 5. |
The perspective will remain same even if the station point changes. |
| A. | true |
| B. | false |
| Answer» C. | |
| 6. |
The measuring line or the line of heights is the trace or the line of intersection with the picture plane, of the                          plane containing the point or points whose heights are to be determined. |
| A. | ground plane |
| B. | picture plane |
| C. | vertical plane |
| D. | central plane |
| Answer» D. central plane | |
| 7. |
The perspectives of all horizontal lines inclined at 45 degrees to the picture plane converge to a                  points on the horizon line. |
| A. | vanishing |
| B. | far |
| C. | distance |
| D. | distant |
| Answer» D. distant | |
| 8. |
The perspectives of all horizontal lines inclined at        degrees to the picture plane converge to a distance points on the horizon line. |
| A. | 30 |
| B. | 45 |
| C. | 60 |
| D. | 90 |
| Answer» C. 60 | |
| 9. |
The perspectives of all horizontal lines inclined at 45 degrees to the picture plane converge to a distance points on the |
| A. | ground line |
| B. | perpendicular axis |
| C. | horizon line |
| D. | center of vision |
| Answer» D. center of vision | |
| 10. |
Which are equidistant from the center of vision? |
| A. | station point |
| B. | ground point |
| C. | distance point |
| D. | vanishing point |
| Answer» D. vanishing point | |
| 11. |
Vanishing points for all horizontal lines are inclined at 45 degrees to the picture plane are given special name of                    points. |
| A. | vanishing |
| B. | far |
| C. | distance |
| D. | distant |
| Answer» D. distant | |
| 12. |
When an object has its one or more faces parallel to the picture plane, its perspective is called                        perspective also called one point perspective. |
| A. | parallel |
| B. | oblique |
| C. | vanishing |
| D. | angular |
| Answer» B. oblique | |
| 13. |
Front view of circle is given and isometric view is to be drawn which of the following is correct procedure in drawing isometric view? |
| A. | turning the circle such that line on diameter is making 30 degrees with horizontal |
| B. | by increasing or decreasing angles between two perpendicular line on diameter at required proportions |
| C. | drawing line in diameter parallel to isometric axes |
| D. | enclosing circle in a square and aligning square to isometric axes and pointing four points on circle touching the square and joining by smooth curve. |
| Answer» E. | |
| 14. |
Isometric view of rhombus will become |
| A. | parallelogram |
| B. | rhombus |
| C. | rectangle |
| D. | square |
| Answer» B. rhombus | |
| 15. |
Isometric view of rectangle will become |
| A. | parallelogram |
| B. | rhombus |
| C. | rectangle |
| D. | square |
| Answer» B. rhombus | |
| 16. |
Isometric view of right angled triangle will be |
| A. | equilateral triangle |
| B. | scalene triangle |
| C. | isosceles triangle |
| D. | right angled triangle |
| Answer» C. isosceles triangle | |
| 17. |
When a rectangle is drawn to an isometric view it will give parallelogram. |
| A. | true |
| B. | false |
| Answer» B. false | |
| 18. |
When a square is drawn to an isometric view it will give rectangle. |
| A. | true |
| B. | false |
| Answer» C. | |
| 19. |
Front view of triangle is given and isometric view is to be drawn which of the following is correct procedure in drawing isometric view. |
| A. | turning the triangle such that base is making 30 degrees with horizontal |
| B. | by increasing or decreasing angles at required proportions |
| C. | drawing parallel to isometric axes |
| D. | drawing rectangle with base and height of triangle and the drawing rectangle parallel to isometric axes and pointing triangle in it |
| Answer» E. | |
| 20. |
Isometric view of equilateral triangle will be |
| A. | equilateral triangle |
| B. | scalene triangle |
| C. | isosceles triangle |
| D. | right angled triangle |
| Answer» C. isosceles triangle | |
| 21. |
Top view of a square is given and has to draw its isometric view which angle the vertical edge has to make with horizontal? |
| A. | 90 degrees |
| B. | 15 degrees |
| C. | 30 degrees |
| D. | 60 degrees |
| Answer» D. 60 degrees | |
| 22. |
Top view of a square is given and has to draw its isometric view which angle the base has to make with horizontal? |
| A. | 90 degrees |
| B. | 15 degrees |
| C. | 30 degrees |
| D. | 60 degrees |
| Answer» D. 60 degrees | |
| 23. |
Front view of the square is given and has to draw its isometric view which angle the vertical edge has to make with horizontal? |
| A. | 90 degrees |
| B. | 15 degrees |
| C. | 30 degrees |
| D. | 60 degrees |
| Answer» B. 15 degrees | |
| 24. |
Front view of the square is given and has to draw its isometric view which angle the base has to make with horizontal? |
| A. | 90 degrees |
| B. | 15 degrees |
| C. | 30 degrees |
| D. | 60 degrees |
| Answer» D. 60 degrees | |
| 25. |
If an isometric drawing is made use of isometric scale then the drawings are called |
| A. | isometric projection |
| B. | isometric view |
| C. | isometric perception |
| D. | orthographic view |
| Answer» B. isometric view | |
| 26. |
If an isometric projection is drawn with true measurements but not with isometric scale then the drawings are called |
| A. | none of the mentioned |
| B. | isometric view |
| C. | isometric perception |
| D. | orthographic view |
| Answer» C. isometric perception | |
| 27. |
Isometric view of cube is drawn and faces of cube are seen as |
| A. | square |
| B. | rectangle |
| C. | rhombus |
| D. | parallelogram |
| Answer» D. parallelogram | |
| 28. |
Isometric view of cube is drawn the angle between the adjacent edges is |
| A. | 90 degrees, 120 degrees |
| B. | 60 degrees, 120 degrees |
| C. | 120 degrees, 120 degrees |
| D. | 90 degrees, 30 degrees |
| Answer» C. 120 degrees, 120 degrees | |
| 29. |
The objects we see in nature will be in Isometric view. |
| A. | true |
| B. | false |
| Answer» C. | |
| 30. |
The true length of the line is 30 cm and isometric view is drawn. How much length is reduced? |
| A. | 24.45 cm |
| B. | 25.98 cm |
| C. | 4.01 cm |
| D. | 5.55 cm |
| Answer» E. | |
| 31. |
The true length of line is 40 cm and isometric view of it is drawn the length would decrease to |
| A. | 28.28 cm |
| B. | 32.6 cm |
| C. | 34.6 c |
| D. | 38.63 cm |
| Answer» C. 34.6 c | |
| 32. |
Isometric view of cube is drawn the angle between the edge of cube and vertical will be |
| A. | 15 degrees |
| B. | 120 degrees |
| C. | 60 degrees |
| D. | 30 degrees |
| Answer» D. 30 degrees | |
| 33. |
Isometric view of cube is drawn the angle between the edge of cube and horizontal will be |
| A. | 15 degrees |
| B. | 120 degrees |
| C. | 45 degrees |
| D. | 30 degrees |
| Answer» E. | |
| 34. |
The planes parallel to any of the two isometric lines are called                  planes. |
| A. | parallel |
| B. | auxiliary |
| C. | isometric |
| D. | oblique |
| Answer» D. oblique | |
| 35. |
The lines parallel to isometric axes are called                  lines. |
| A. | parallel |
| B. | auxiliary |
| C. | isometric |
| D. | oblique |
| Answer» D. oblique | |
| 36. |
The true length of edge of cube is 15 cm what will be the isometric length? |
| A. | 17.78 cm |
| B. | 14.48 cm |
| C. | 12.99 cm |
| D. | 12.22 cm |
| Answer» E. | |
| 37. |
The length in isometric drawing of line is 20 cm. What is the true length of it? |
| A. | 24.53 cm |
| B. | 15.46 cm |
| C. | 19.31 cm |
| D. | 23.09 cm |
| Answer» B. 15.46 cm | |
| 38. |
The value of the ratio of isometric length to true length is |
| A. | 0.141 |
| B. | 0.372 |
| C. | 0.815 |
| D. | 0.642 |
| Answer» D. 0.642 | |
| 39. |
The angle between the isometric axes is |
| A. | 180 degrees |
| B. | 60 degrees |
| C. | 90 degrees |
| D. | 120 degrees |
| Answer» E. | |
| 40. |
Drawing straight lines on both the surfaces of solids and then pointing the points where they intersect and drawing lines which forms the line of intersection this process of finding the line of intersection is termed as                method. |
| A. | assumption |
| B. | line |
| C. | removing material |
| D. | cutting- plane |
| Answer» C. removing material | |
| 41. |
The line of intersection formed is curve while two solids are intersecting the solids may be |
| A. | cylinder, sphere |
| B. | prism, prism |
| C. | cuboid, cube |
| D. | prism, pyramid |
| Answer» B. prism, prism | |
| 42. |
The surfaces of which intersect one another in lines which are called line of intersection. |
| A. | true |
| B. | false |
| Answer» B. false | |
| 43. |
The line of intersection formed is straight line while two solids are intersecting the solids may be |
| A. | cube, cylinder |
| B. | prism, cone |
| C. | pyramid, cuboid |
| D. | cube, cone |
| Answer» D. cube, cone | |
| 44. |
Which method of development is employed in case of pyramids? |
| A. | parallel-line development |
| B. | approximation method |
| C. | triangulation development |
| D. | radial-line development |
| Answer» E. | |
| 45. |
A zone is portion of the sphere enclosed between two planes parallel to the axis. |
| A. | true |
| B. | false |
| Answer» C. | |
| 46. |
The development of the curved surface of a cone is a                      of a |
| A. | sector, circle |
| B. | segment, circle |
| C. | segment, ellipse |
| D. | arc, parabola |
| Answer» B. segment, circle | |
| 47. |
The development of the lateral surface of a cylinder is a rectangle having one side equal to the                            of its base-circle and the other equal to its length. |
| A. | circumference |
| B. | area |
| C. | diameter |
| D. | radius |
| Answer» B. area | |
| 48. |
The development of the surface of a cube consists of          equal squares, the length of the side of the squares being equal to the length of the edge of the cube. |
| A. | 4 |
| B. | 6 |
| C. | 12 |
| D. | 8 |
| Answer» C. 12 | |
| 49. |
Which method is used to develop transition pieces? |
| A. | parallel-line development |
| B. | approximation method |
| C. | triangulation development |
| D. | radial-line development |
| Answer» D. radial-line development | |
| 50. |
Which method of development is employed in case of double curved objects? |
| A. | parallel-line development |
| B. | approximation method |
| C. | triangulation development |
| D. | radial-line development |
| Answer» C. triangulation development | |