MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 406 Mcqs, each offering curated multiple-choice questions to sharpen your 12th knowledge and support exam preparation. Choose a topic below to get started.
| 251. |
A point is 15 units away from the vertical plane and 12 units away from profile plane and horizontal plane in 1st quadrant then the projections are drawn on paper the distance between the front view and top view of point is |
| A. | 27 |
| B. | 15 |
| C. | 12 |
| D. | 24 |
| Answer» B. 15 | |
| 252. |
A point is 20 units away from the vertical plane and 12 units away from profile plane and 9 units away from horizontal plane in 1st quadrant then the projections are drawn on paper the distance between the side view and top view of point is |
| A. | 29 units |
| B. | 21 units |
| C. | 35.8 units |
| D. | 17.9 units |
| Answer» D. 17.9 units | |
| 253. |
A point is 2 units away from the vertical plane and 3 units away from profile plane and 7 units away from horizontal plane in 1st quadrant then the projections are drawn on paper the shortest distance from top view and side view of point is |
| A. | 10.29 |
| B. | 5.14 |
| C. | 9 |
| D. | 7 |
| Answer» D. 7 | |
| 254. |
A point is 20 units away from the vertical plane and 12 units away from profile plane and 9 units away from horizontal plane in 1st quadrant then the projections are drawn on paper the distance between the side view and front view of point is |
| A. | 29 units |
| B. | 21 units |
| C. | 32 units |
| D. | 11 units |
| Answer» D. 11 units | |
| 255. |
A point is 8 units away from the vertical plane and 2 units away from profile plane and 4 units away from horizontal plane in 1st quadrant then the projections are drawn on paper the distance between the side view and front view of point is |
| A. | 12 units |
| B. | 6 units |
| C. | 10 units |
| D. | 8 units |
| Answer» D. 8 units | |
| 256. |
A point is 5 units away from the vertical plane and 4 units away from profile plane and 3 units away from horizontal plane in 1st quadrant then the projections are drawn on paper the distance between the front view and top view of point is |
| A. | 7 units |
| B. | 8 units |
| C. | 9 units |
| D. | 5 units |
| Answer» C. 9 units | |
| 257. |
Two points are placed in 1st quadrant of projection planes such that the line joining the points is perpendicular to profile plane the side view and top view will be |
| A. | single point, two points |
| B. | two points, single point |
| C. | single point, single point |
| D. | two points, two points |
| Answer» B. two points, single point | |
| 258. |
A hexagonal nut is placed on a horizontal plane such that the axis is perpendicular to profile plane. The top view and side view will be |
| A. | rectangle, hexagon |
| B. | hexagon, rectangle |
| C. | rectangle, rectangle |
| D. | rectangle, circle |
| Answer» B. hexagon, rectangle | |
| 259. |
A pentagonal prism is placed the axis is perpendicular to horizontal plane, the top view and front view are |
| A. | pentagon, rectangle |
| B. | rectangle, rectangle |
| C. | pentagon, triangle |
| D. | rectangle, triangle |
| Answer» B. rectangle, rectangle | |
| 260. |
A triangular prism is placed in projection plane such that the square surface is parallel to horizontal plane. The top view, front view will be |
| A. | square, rectangle respectively |
| B. | rectangle, triangle respectively |
| C. | rectangle, rectangle respectively |
| D. | triangle, rectangle respectively |
| Answer» D. triangle, rectangle respectively | |
| 261. |
A Square pyramid is resting on vertical plane with base parallel to vertical plane. The side view will be |
| A. | triangle |
| B. | polygon with 4 sides |
| C. | square |
| D. | polygon with 5 sides |
| Answer» B. polygon with 4 sides | |
| 262. |
The views will change if we keep the object in different quadrants. |
| A. | true |
| B. | false |
| Answer» C. | |
| 263. |
A regular cone is placed on horizontal plane on its base the top view is |
| A. | circle |
| B. | rectangle |
| C. | square |
| D. | triangle |
| Answer» B. rectangle | |
| 264. |
A regular tetrahedron is placed on horizontal plane on one of its base, the front view, top view and side view gives triangle. |
| A. | true |
| B. | false |
| Answer» B. false | |
| 265. |
A plate of a negligible thickness of circular shape is placed parallel to horizontal plane the front view will be |
| A. | line |
| B. | circle |
| C. | rectangle |
| D. | ellipse |
| Answer» B. circle | |
| 266. |
A Cardboard is made to cut in shape of ‘A’ and as we placed in projection planes and from top view the legs of cardboard touch the profile plane and cardboard is parallel to horizontal plane. Which of the following is wrong? |
| A. | the front view gives thickness of cardboard |
| B. | the side views give width of cardboard |
| C. | the front view gives height of cardboard |
| D. | the top view gives thickness of cardboard |
| Answer» E. | |
| 267. |
An object is placed in between projection planes, the front view and side view gives the same rectangle and top view is giving square the object is |
| A. | a square cylinder, such that square base is parallel to horizontal plane |
| B. | a square cylinder, such that square base is parallel to vertical plane |
| C. | a square cylinder, such that square base is parallel to profile plane |
| D. | a square cylinder, such that axis is parallel to horizontal |
| Answer» B. a square cylinder, such that square base is parallel to vertical plane | |
| 268. |
An egg is placed vertical to horizontal plane the top view will be |
| A. | ellipse |
| B. | circle |
| C. | oval |
| D. | sphere |
| Answer» C. oval | |
| 269. |
A cylinder’s axis is perpendicular to profile plane the top view will be |
| A. | circle |
| B. | cylinder |
| C. | rectangle |
| D. | parallelogram |
| Answer» D. parallelogram | |
| 270. |
A Cube is placed on horizontal plane such that one of the space diagonal is perpendicular to horizontal plane the top view will be |
| A. | octagon |
| B. | square |
| C. | hexagon |
| D. | rectangle |
| Answer» D. rectangle | |
| 271. |
A regular cone is rested on base on horizontal plane the front view will be |
| A. | circle |
| B. | scalene triangle |
| C. | equilateral triangle |
| D. | isosceles triangle |
| Answer» E. | |
| 272. |
If an object is placed in 3rd quadrant such that one of the surfaces of object is coinciding with both vertical plane and horizontal plane, what is the correct position of views from the following? |
| A. | the top view touches the reference line |
| B. | the top view and side view touch each other |
| C. | both side views touch each other |
| D. | the top view and front touches each other at reference line |
| Answer» E. | |
| 273. |
If an object is placed in 3rd quadrant such that one of the surfaces of object is coinciding with horizontal plane, what is the correct position of views from the following? |
| A. | the front view touches the reference line |
| B. | the side view touches the reference line |
| C. | the top view touches the reference line |
| D. | the bottom view touches the reference line |
| Answer» B. the side view touches the reference line | |
| 274. |
If an object is placed in 3rd quadrant such that one of the surfaces of object is coinciding with vertical plane, what is the correct position of views from the following? |
| A. | the front view touches the reference line |
| B. | the side view touches the reference line |
| C. | the top view touches the reference line |
| D. | the bottom view touches the reference line |
| Answer» D. the bottom view touches the reference line | |
| 275. |
In 3rd angle projection the lies between and |
| A. | object, projection plane, observer |
| B. | projection plane, object, observer |
| C. | reference line, side view, front view |
| D. | reference line, left side view, right side view |
| Answer» C. reference line, side view, front view | |
| 276. |
3rd angle projection is recommended by |
| A. | usa |
| B. | isi |
| C. | bureau of indian standards |
| D. | is |
| Answer» B. isi | |
| 277. |
In 3rd angle projection the object is kept in |
| A. | 1st quadrant |
| B. | 2nd quadrant |
| C. | 3rd quadrant |
| D. | 4th quadrant |
| Answer» D. 4th quadrant | |
| 278. |
If an object is placed in 1st quadrant such that one of the surfaces of object is coinciding with both vertical plane and horizontal plane, what is the correct position of views from the following? |
| A. | the top view touches the reference line |
| B. | the top view and side view touch each other |
| C. | both side views touch each other |
| D. | the top view and front touches each other at reference line |
| Answer» E. | |
| 279. |
Where is the position of bottom view in 1st angle projection? |
| A. | left side of right hand side view |
| B. | right side of right hand side view |
| C. | above the front view |
| D. | below the top view |
| Answer» D. below the top view | |
| 280. |
If an object is placed in 1st quadrant such that one of the surfaces of object is coinciding with horizontal plane, what is the correct position of views from the following? |
| A. | the front view touches the reference line |
| B. | the side view touches the reference line |
| C. | the top view touches the reference line |
| D. | the bottom view touches the reference line |
| Answer» B. the side view touches the reference line | |
| 281. |
If an object is placed in 1st quadrant such that one of the surfaces of object is coinciding with vertical plane, what is the correct position of views from the following? |
| A. | the front view touches the reference line |
| B. | the side view touches the reference line |
| C. | the top view touches the reference line |
| D. | the bottom view touches the reference line |
| Answer» D. the bottom view touches the reference line | |
| 282. |
The positions of reference line and top view in 1st angle projection are |
| A. | reference line lies above the top view |
| B. | reference line lies below the top view |
| C. | reference line lie left side to top view |
| D. | reference line lie right side to top view |
| Answer» B. reference line lies below the top view | |
| 283. |
In 1st angle projection the positions of front and top views are |
| A. | top view lies above the front view |
| B. | front view lies above the top view |
| C. | front view lie left side to top view |
| D. | top view lie left side to front view |
| Answer» C. front view lie left side to top view | |
| 284. |
In 1st angle projection the lies between and |
| A. | object, projection plane, observer |
| B. | projection plane, object, observer |
| C. | reference line, side view, front view |
| D. | reference line, left side view, right side view |
| Answer» B. projection plane, object, observer | |
| 285. |
1st angle projection is recommended by |
| A. | usa |
| B. | isi |
| C. | bureau of indian standards |
| D. | asme |
| Answer» D. asme | |
| 286. |
The positive vertical plane and positive horizontal plane makes angle with each other in anti clockwise direction. |
| A. | 180 degrees |
| B. | 270 degrees |
| C. | 0 degrees |
| D. | 90 degrees |
| Answer» C. 0 degrees | |
| 287. |
In 1st angle projection the object is kept in |
| A. | 1st quadrant |
| B. | 2nd quadrant |
| C. | 3rd quadrant |
| D. | 4th quadrant |
| Answer» B. 2nd quadrant | |
| 288. |
The negative horizontal plane and positive horizontal makes angle with each other. |
| A. | 90 degrees |
| B. | 180 degrees |
| C. | 120 degrees |
| D. | 270 degrees |
| Answer» C. 120 degrees | |
| 289. |
The vertical plane is also called |
| A. | straight plane |
| B. | perpendicular plane |
| C. | frontal plane |
| D. | pole plane |
| Answer» D. pole plane | |
| 290. |
An object is kept in one of the quadrants of principal planes of projection, for the front view the view is first and object is next and for top view the object came first and then the view on plane (the observer is at top right side of principal planes). The object is in which quadrant? |
| A. | 1st quadrant |
| B. | 2nd quadrant |
| C. | 3rd quadrant |
| D. | 4th quadrant |
| Answer» C. 3rd quadrant | |
| 291. |
The line formed by intersection of principal planes is called |
| A. | projection line |
| B. | origin line |
| C. | line of intersection |
| D. | reference line |
| Answer» E. | |
| 292. |
The 1st quadrant is in which position? |
| A. | below h.p, behind v.p |
| B. | above h.p, behind v.p |
| C. | above h.p, in-front of v.p |
| D. | below h.p, in-front of v.p |
| Answer» D. below h.p, in-front of v.p | |
| 293. |
The 4th quadrant is in which position? |
| A. | below h.p, behind v.p |
| B. | above h.p, behind v.p |
| C. | above h.p, in-front of v.p |
| D. | below h.p, in-front of v.p |
| Answer» E. | |
| 294. |
In perspective projection and oblique projection, the projectors are not parallel to each other. |
| A. | true |
| B. | false |
| Answer» C. | |
| 295. |
What is additional 3rd view on orthographic projection in general for simple objects? |
| A. | front view |
| B. | top view |
| C. | side view |
| D. | view at 45 degrees perpendicular to horizontal plane |
| Answer» D. view at 45 degrees perpendicular to horizontal plane | |
| 296. |
Orthographic projection is the representation of two or more views on the mutual perpendicular projection planes. |
| A. | true |
| B. | false |
| Answer» B. false | |
| 297. |
In orthographic projection an object is represented by two or three views on different planes which |
| A. | gives views from different angles from different directions |
| B. | are mutually perpendicular projection planes |
| C. | are parallel along one direction but at different cross-section |
| D. | are obtained by taking prints from 2 or 3 sides of object |
| Answer» C. are parallel along one direction but at different cross-section | |
| 298. |
When the projectors are parallel to each other and also perpendicular to the plane, the projection is called |
| A. | perspective projection |
| B. | oblique projection |
| C. | isometric projection |
| D. | orthographic projection |
| Answer» E. | |
| 299. |
The straight lines which are drawn from various points on the contour of an object to meet a plane are called as |
| A. | connecting lines |
| B. | projectors |
| C. | perpendicular lines |
| D. | hidden lines. |
| Answer» C. perpendicular lines | |
| 300. |
The curve which has eccentricity zero is |
| A. | parabola |
| B. | ellipse |
| C. | hyperbola |
| D. | circle |
| Answer» E. | |