MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 4320 Mcqs, each offering curated multiple-choice questions to sharpen your Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 2001. |
A teleprocessing system may consist of |
| A. | user systems |
| B. | communications systems |
| C. | computer center systems |
| D. | All of the above |
| E. | None of the above |
| Answer» E. None of the above | |
| 2002. |
How many digits of the Network User Address are known as the DNIC (Data Network Identification Code)? |
| A. | first three |
| B. | first four |
| C. | first five |
| D. | first seven |
| E. | None of the above |
| Answer» C. first five | |
| 2003. |
Which of the following is the address of the router? |
| A. | The IP address |
| B. | The TCP address |
| C. | The subnet mask |
| D. | The default gateway |
| E. | None of the above |
| Answer» E. None of the above | |
| 2004. |
Which of the following divides the high speed signal into frequency bands? |
| A. | t-switch |
| B. | modem |
| C. | frequency-division multiplexer |
| D. | time-division multiplexer |
| E. | None of the above |
| Answer» D. time-division multiplexer | |
| 2005. |
What is the first octet range for a class C IP address? |
| A. | 192 - 255 |
| B. | 192 - 223 |
| C. | 192 - 226 |
| D. | 128 - 191 |
| E. | 1 - 126 |
| Answer» C. 192 - 226 | |
| 2006. |
The dialogue techniques for terminal use do not include |
| A. | questions and answers |
| B. | open-ended questions |
| C. | form fillings |
| D. | menu display |
| E. | None of the above |
| Answer» C. form fillings | |
| 2007. |
You have a network ID of 192.168.10.0 and require at least 25 host IDs for each subnet, with the largest amount of subnets available. Which subnet mask should you assign? |
| A. | 255.255.255.192 |
| B. | 255.255.255.224 |
| C. | 255.255.255.240 |
| D. | 255.255.255.248 |
| E. | 255.255.255.255 |
| Answer» C. 255.255.255.240 | |
| 2008. |
You are working with a network that has the network ID 192.168.10.0 and require nine subsets for your company and the maximum number of hosts. What subnet mask should you use? |
| A. | 255.255.255.192 |
| B. | 255.255.255.224 |
| C. | 255.255.255.240 |
| D. | 255.255.255.248 |
| E. | 255.255.255.252 |
| Answer» D. 255.255.255.248 | |
| 2009. |
The encoding method specified in the EIA-232 standard is _____. |
| A. | NRZ-I |
| B. | NRZ-L |
| C. | Manchester |
| D. | Differential Manchester |
| Answer» C. Manchester | |
| 2010. |
Examples are packet switching using frame relay, and cell switching using ATM technologies. Select the best fit for answer: |
| A. | Bandwidth alternatives |
| B. | Switching alternating |
| C. | Inter organizational networks |
| D. | Extranets |
| Answer» C. Inter organizational networks | |
| 2011. |
TCP is: |
| A. | Operates at the Data Link layer |
| B. | Connection orientated and unreliable |
| C. | Connection orientated and reliable |
| D. | Connectionless and unreliable |
| Answer» D. Connectionless and unreliable | |
| 2012. |
Establishing a virtual connection is functionally equivalent to |
| A. | Connecting as virtual memory |
| B. | Physically connecting a DTE and DCE |
| C. | Placing a telephone call prior to a conversation |
| D. | Placing a modem prior to a conversation |
| E. | None of the above |
| Answer» D. Placing a modem prior to a conversation | |
| 2013. |
The first step in troubleshooting many problems is to verify which of the following? |
| A. | The subnet mask is valid |
| B. | TCP/IP is installed correctly on the client |
| C. | The WINS server is running |
| D. | The BDC is operable |
| E. | None of the above |
| Answer» C. The WINS server is running | |
| 2014. |
Data security threats include |
| A. | hardware failure |
| B. | privacy invasion |
| C. | fraudulent manipulation of data |
| D. | All of the above |
| E. | None of the above |
| Answer» C. fraudulent manipulation of data | |
| 2015. |
An operation that will increase the length of a list is |
| A. | Insert |
| B. | Look-up |
| C. | Modify |
| D. | All of the above |
| E. | None of the above |
| Answer» B. Look-up | |
| 2016. |
In SQL, which command(s) is(are) used to enable/disable a database trigger? |
| A. | ALTER TRIGGER |
| B. | ALTER DATABASE |
| C. | ALTER TABLE |
| D. | MODIFY TRIGGER |
| E. | All of the above |
| Answer» B. ALTER DATABASE | |
| 2017. |
In a relational schema, each tuple is divided into fields called |
| A. | Relations |
| B. | Domains |
| C. | Queries |
| D. | All of the above |
| E. | None of the above |
| Answer» C. Queries | |
| 2018. |
Communication network is |
| A. | one or more conductors that serve as a common connection for a related group of devices |
| B. | a continuous frequency capable of being modulated or impressed with a second signal |
| C. | the condition with two or more stations attempt to use the same channel at the same time |
| D. | a collection of interconnected functional units that provides a data communications service among stations attached to the network |
| E. | None of the above |
| Answer» E. None of the above | |
| 2019. |
Which of the following is an advantage to using fiber optics data transmission? |
| A. | resistance to data theft |
| B. | fast data transmission rate |
| C. | low noise level |
| D. | few transmission errors |
| E. | All of the above |
| Answer» F. | |
| 2020. |
If a sine wave has a frequency of 500 Hz, the period in seconds of the sine wave is: |
| A. | 5000 |
| B. | 0.003 |
| C. | 0.02 |
| D. | 0.002. |
| E. | None of the above |
| Answer» E. None of the above | |
| 2021. |
A Hall effect switch is usually used to: |
| A. | , measure voltage |
| B. | measure temperature |
| C. | sense a vacuum |
| D. | sense the presence of a magnetic object. |
| E. | None of the above |
| Answer» E. None of the above | |
| 2022. |
A microprocessor is: |
| A. | controlled by a program |
| B. | an integrated circuit |
| C. | relatively inexpensive |
| D. | All of the above |
| E. | None of the above |
| Answer» E. None of the above | |
| 2023. |
An up/down counter used in a TI510PC has three inputs. Which of the following is not one of them? |
| A. | Count up |
| B. | Count out |
| C. | Reset. |
| D. | Count down |
| E. | None of the above |
| Answer» C. Reset. | |
| 2024. |
The addition of _____ can reduce processing time. |
| A. | A buffer |
| B. | An EPROM |
| C. | A converter |
| D. | A co-processor |
| E. | None of the above |
| Answer» E. None of the above | |
| 2025. |
A venturi tube: |
| A. | is extremely difficult to use |
| B. | is made only of metal |
| C. | measures the presence of a liquid |
| D. | can be used to measure gas or liquid flow rates |
| E. | None of the above |
| Answer» E. None of the above | |
| 2026. |
The hardware device Jhat acts as both a switching and connecting unit is called a(n): |
| A. | concentrator |
| B. | RS-232C port |
| C. | multiplexer |
| D. | communications processor |
| E. | None of the above |
| Answer» D. communications processor | |
| 2027. |
The APT (automatically progra mmed tools) language is used with: |
| A. | large automation systems |
| B. | drafting systems |
| C. | programmable controllers |
| D. | numerical controlled machines. |
| E. | None of the above |
| Answer» E. None of the above | |
| 2028. |
The Ziegler-Nichols method: |
| A. | is a graphical solution method |
| B. | can be used to determine gain factors of a PI loop |
| C. | is a method of control |
| D. | a and b above |
| E. | None of the above |
| Answer» E. None of the above | |
| 2029. |
The heart of automation technology is. |
| A. | robots |
| B. | computers |
| C. | control |
| D. | sensors |
| E. | None of the above |
| Answer» C. control | |
| 2030. |
Which CAD display configurability allows work without any host support? |
| A. | Highly intelligent |
| B. | Medium intelligence |
| C. | Low intelligence |
| D. | One with no secondary storage capacity. |
| E. | None of the above |
| Answer» B. Medium intelligence | |
| 2031. |
Robots can increase productivity because: |
| A. | they do not take a vacation |
| B. | they do not get tired |
| C. | production quality is uniform |
| D. | All of the above |
| E. | None of the above |
| Answer» E. None of the above | |
| 2032. |
The rectangular boundary around a specific area on the display is called |
| A. | a window |
| B. | a conic section |
| C. | a view point |
| D. | a view plane |
| E. | None of the above |
| Answer» B. a conic section | |
| 2033. |
In the PROLOG language system, facts are manipulated by: |
| A. | algorithms |
| B. | rules |
| C. | memory |
| D. | simulations |
| E. | None of the above |
| Answer» C. memory | |
| 2034. |
A favourable reason for automation is to: |
| A. | decrease throughput |
| B. | raises assembly cost |
| C. | perform difficult operations |
| D. | increase number of operations |
| E. | None of the above |
| Answer» D. increase number of operations | |
| 2035. |
Advantages of robots include: |
| A. | increased productivity |
| B. | ability to withstand hazardous environments |
| C. | good return on investment and better company image |
| D. | All of the above |
| E. | None of the above |
| Answer» E. None of the above | |
| 2036. |
Light sensors: |
| A. | cannot be used a s limit switches. |
| B. | come in a wide variety of mounting styles |
| C. | work in direct sunlight |
| D. | never use infrared light as light source |
| E. | None of the above |
| Answer» C. work in direct sunlight | |
| 2037. |
What is proportional control? |
| A. | It has a discrete output for each error value |
| B. | The controller output varies continuously over a range |
| C. | The gain is independent of offset error. |
| D. | All of the above |
| E. | None of the above |
| Answer» C. The gain is independent of offset error. | |
| 2038. |
Analog and digital controllers: |
| A. | cost the same to build |
| B. | accept the same input signals |
| C. | can be changed with equal case |
| D. | All of the above |
| E. | None of the above |
| Answer» F. | |
| 2039. |
The real "brain" of an artificial intelligence system is referred to as: |
| A. | bubble memory |
| B. | the expert system |
| C. | recursive technology |
| D. | natural language interfaces |
| E. | None of the above |
| Answer» C. recursive technology | |
| 2040. |
Robot motion: |
| A. | is the same for all robots |
| B. | usually imitates human motion |
| C. | is not dependent on the robot structure |
| D. | All of the above |
| E. | None of the above |
| Answer» C. is not dependent on the robot structure | |
| 2041. |
A proportional plus integral contro ller can: |
| A. | has no transient response |
| B. | can compensate for lag |
| C. | can increase the system type |
| D. | both (b) and (c) |
| E. | None of the above |
| Answer» E. None of the above | |
| 2042. |
Which of the following method is used the results of a design analysis as a base for redesign decisions? |
| A. | The iterative design method |
| B. | The direct method |
| C. | The design selection method |
| D. | All of the above |
| E. | None of the above |
| Answer» B. The direct method | |
| 2043. |
What kind of capability is required if one plans to interface with a plotter or printer? |
| A. | A graphics cable |
| B. | RGB monitor |
| C. | A graphics board |
| D. | A co-processor |
| E. | None of the above |
| Answer» D. A co-processor | |
| 2044. |
Stepping motors: |
| A. | can run at varying speeds |
| B. | can be built to index different amounts by changing the pole configuration |
| C. | can run both clockwise and counterclockwise |
| D. | do not require commutators |
| E. | All of the above |
| Answer» F. | |
| 2045. |
Most continuous control actuators: |
| A. | are of the time proportioning type |
| B. | use a 4 to 20 mA current loop input |
| C. | are used with standard continuous control loop |
| D. | (b) and (c) above |
| E. | None of the above |
| Answer» E. None of the above | |
| 2046. |
Group technology brings together and organizes: |
| A. | automation and tool production |
| B. | parts and simulation analysis |
| C. | documentation and analysis |
| D. | common parts, problems, and tasks |
| E. | None of the above |
| Answer» E. None of the above | |
| 2047. |
The steady-state error is: |
| A. | independent of the type of input |
| B. | a function of the transient response |
| C. | zero for all inputs to type 1 systems |
| D. | decreased by increasing gain. |
| E. | None of the above |
| Answer» E. None of the above | |
| 2048. |
A flexible manufacturing system may be: |
| A. | an automated assembly line |
| B. | expensive to alter |
| C. | very difficult to change when new products are introduced |
| D. | All of the above. |
| E. | None of the above |
| Answer» B. expensive to alter | |
| 2049. |
The digitizing technology that uses an electric field radiated from the tablet and picked up by a cursor is: |
| A. | electromagnetic |
| B. | raster |
| C. | sonic |
| D. | electrostic |
| E. | None of the above |
| Answer» E. None of the above | |
| 2050. |
Which of the methods below can be used to tell a robot what it is to do? |
| A. | Walk-through |
| B. | Set mechanical stops |
| C. | Software program |
| D. | (a) and (c) |
| E. | None of the above |
| Answer» E. None of the above | |