MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 4320 Mcqs, each offering curated multiple-choice questions to sharpen your Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 4301. |
A relocate program form is the one which |
| A. | cannot be made to execute in any area of storage other than the one designated for it at the time of its coding or translation |
| B. | consists of a program and relevant information for its relocation |
| C. | can itself perform the relocation of its address-sensitive portions |
| D. | All of the above |
| Answer» C. can itself perform the relocation of its address-sensitive portions | |
| 4302. |
Multiprogramming was made possible by |
| A. | input/output units that operate independently of the CPU |
| B. | operating systems |
| C. | both (a) and (b) |
| D. | neither (a) nor (b) |
| Answer» D. neither (a) nor (b) | |
| 4303. |
The total inductance of a series inductor circuit is: |
| A. | equal to the sum of the individual inductance values |
| B. | equal to the sum of the individual inductive-reactance values |
| C. | less than the value of the smallest inductor |
| D. | equal to the source voltage divided by total current |
| E. | None of the above |
| Answer» B. equal to the sum of the individual inductive-reactance values | |
| 4304. |
What is the capacitive reactance of a 0.1 micro F capacitor that is operating at 1000 Hz? |
| A. | less than 1 Ohm |
| B. | 1590 Ohm |
| C. | 312 Ohm |
| D. | 690 Ohm |
| E. | None of the above |
| Answer» C. 312 Ohm | |
| 4305. |
Assembler is |
| A. | a program that automate the translation of assembly language into machine language |
| B. | a program that accepts a program written in a high level language and produces an object program |
| C. | a program that places programs into memory and prepares them for execution |
| D. | is a program that appears to execute a source program as if it were machine language |
| Answer» B. a program that accepts a program written in a high level language and produces an object program | |
| 4306. |
An Interpreter is |
| A. | is a program that appears to execute a source program as if it were machine language |
| B. | a program that automate the translation of assembly language into machine language |
| C. | program that accepts a program written in a high level language and produces an object program |
| D. | a program that places programs into memory and prepares them for execution |
| Answer» B. a program that automate the translation of assembly language into machine language | |
| 4307. |
Systems software is a program that directs the overall operation of the computer, facilitates its use and interacts with the users. What are the different types of this software? |
| A. | Operating system |
| B. | Languages |
| C. | Utilities |
| D. | All of the above |
| Answer» E. | |
| 4308. |
Which one of the following statements is true for current flowing in a series circuit? |
| A. | The amount of current flow through each part of a series circuit can be different, depending on the resistance of each part and the amount of voltage applied to it |
| B. | The total current in a series circuit is equal to the sum of the currents flowing through the individual components in the circuit |
| C. | The same current flows through every part of a series circuit |
| D. | The total current in a series circuit is equal to the total voltage multiplied by the total resistance |
| E. | None of the above |
| Answer» D. The total current in a series circuit is equal to the total voltage multiplied by the total resistance | |
| 4309. |
When the graph of current versus voltage is a straight line, the device is referred to as |
| A. | Active |
| B. | Linear |
| C. | Nonlinear |
| D. | Bipolar |
| E. | None of the above |
| Answer» C. Nonlinear | |
| 4310. |
A translator which reads an entire programme written in a high level language and converts it into machine language code is: |
| A. | assembler |
| B. | translator |
| C. | compiler |
| D. | system software |
| Answer» D. system software | |
| 4311. |
Which of the following might be used to convert high-level language instructions into machine language? |
| A. | system software |
| B. | applications software |
| C. | an operating environment |
| D. | an interpreter |
| Answer» E. | |
| 4312. |
The system/370 assembler language |
| A. | is a term that refers to the control programs of an operating system |
| B. | is used to remember which of the general-purpose registers are currently available as base registers, and what base addresses they contain |
| C. | allows multiple programs to reside in separate areas of core at the same time |
| D. | allows the programmer to write base registers and displacements explicitly in the source program |
| Answer» E. | |
| 4313. |
Convert the ASLA assembly language instructions into hexadecimal machine language: |
| A. | 0111EF |
| B. | 9001E6 |
| C. | DA000F |
| D. | 40 |
| Answer» E. | |
| 4314. |
The advantage(s) inherent to using high level languages is/are: |
| A. | Fewer people, less management and shorter transition in learning time |
| B. | Improved debugging capability, and superior documentation |
| C. | A greater degree of machine independence |
| D. | All of the above |
| Answer» E. | |
| 4315. |
Convert the ASCII/BEAR/assembly language pseudo-ops into hexadecimal machine language |
| A. | 0111EF |
| B. | 03 16 |
| C. | F8 |
| D. | 42 65 61 72 |
| Answer» E. | |
| 4316. |
A development stategy whereby the executive control modules of a system are coded and tested first, is known as |
| A. | Bottom-up development |
| B. | Top-down development |
| C. | Left-Right development |
| D. | All of the above |
| Answer» C. Left-Right development | |
| 4317. |
A non-relocatable program is one which |
| A. | cannot be made to execute in any area of storage other than the one designated for it at the time of its coding or translation |
| B. | consists of a program and relevant information for its relocation |
| C. | can itself perform the relocation of its address-sensitive portions |
| D. | All Of the above |
| Answer» B. consists of a program and relevant information for its relocation | |
| 4318. |
The task(s) of the Lexial analysis phase is/are: |
| A. | to parse the source program into the basic elements or tokens of the language |
| B. | to build a literal table and an identifier table |
| C. | to build a uniform symbol table |
| D. | All of the above |
| Answer» E. | |
| 4319. |
Which of the following functions is/ are performed by the loader? |
| A. | Allocate space in memory for the programs and resolve symbolic references between object decks |
| B. | Physically place the machine instructions and data into memory |
| C. | Adjust all address dependent locations, such as address constants, to correspond to the allocated space |
| D. | All of the above |
| Answer» E. | |
| 4320. |
Convert the 11014B machine language instructions into assembly language, assuming that they were not generated by pseudo-ops: |
| A. | ASRA |
| B. | LOADA h#OD4E, i |
| C. | STOREA h#014B, d |
| D. | ADDA h#01FE, i |
| Answer» D. ADDA h#01FE, i | |