Explore topic-wise MCQs in Engineering.

This section includes 4320 Mcqs, each offering curated multiple-choice questions to sharpen your Engineering knowledge and support exam preparation. Choose a topic below to get started.

1801.

Which of the following is not used for storage purposes with main frame computers?

A. removable disks
B. fixed disks
C. mass storage systems
D. diskettes
E. None of the above
Answer» E. None of the above
1802.

Which is true for the digital computer?

A. It is less accurate than the analog computer
B. It represents the decimal numbers through a string of binary digits
C. It is used primarily in scientific applications
D. Both (a) and (c)
E. None of the above
Answer» C. It is used primarily in scientific applications
1803.

Which of the following terminals' output most closely resembles the output produced by a plotter?

A. graphics terminal
B. POS terminal
C. hardcopy terminal
D. all the above
E. None of the above
Answer» B. POS terminal
1804.

What is the main advantage of magnetic core memory over semiconductor RAM memory?

A. more compact and smaller
B. more economical
C. a bit does not have to write after reading
D. non volatile
E. None of the above
Answer» E. None of the above
1805.

The unit of a computer system that executes program, communicates with and often controls the operation of other subsystems of the computer is known as

A. CPU
B. Control Unit
C. I/O unit
D. Peripheral unit
E. None of the above
Answer» B. Control Unit
1806.

Human beings are referred to as Homosapiens. Which device is called Silico sapiens?

A. Monitor
B. Hardware
C. Robot
D. Computer
E. None of the above
Answer» E. None of the above
1807.

Which access method is used for obtaining a record from a cassette tape

A. direct
B. sequential
C. random
D. All of the above
E. None of the above
Answer» C. random
1808.

A billionth of a second is defined as a:

A. millisecond
B. microsecond
C. nanosecond
D. picoseconds
E. None of the above
Answer» D. picoseconds
1809.

Where have the program and data to be located before the ALU and control unit of a computer can operate on it?

A. Internal memory
B. Secondary memory
C. Microprocessor
D. Magnetic tapes
E. None of the above
Answer» B. Secondary memory
1810.

The most important advantage of a video disk is

A. Compactness
B. Potential capacity
C. Durability
D. Cost effectiveness
E. None of the above
Answer» C. Durability
1811.

When was Apple Macintosh II microcomputer introduced in the market?

A. 1964
B. 1970
C. 1983
D. 1986
E. None of the above
Answer» D. 1986
1812.

Control Unit of a digital computer is often called the

A. Clock
B. Nerve center
C. ICs
D. All of the above
E. None of the above
Answer» C. ICs
1813.

The ASCII code for the character J is:

A. 1001 0001
B. 1001 1010
C. 0100 1010
D. 1010 0001
E. None of the above
Answer» D. 1010 0001
1814.

Off-line operation is the operation of devices without the control of

A. Memory
B. CPU
C. ALU
D. Control unit
E. None of the above
Answer» C. ALU
1815.

Which of the following is the user programmed semiconductor memory?

A. SRAM
B. DRAM
C. EPROM
D. All of the above
E. None of the above
Answer» D. All of the above
1816.

A multi programming system is one that can

A. run very fast
B. share hardware resources with many programs simultaneously
C. compute many programs simultaneously
D. use many operating systems
E. None of the above
Answer» C. compute many programs simultaneously
1817.

In comparison with static RAM memory, the dynamic RAM memory has

A. lower bit density and higher power consumption
B. higher bit density and higher power consumption
C. lower bit density and lower power consumption
D. higher bit density and lower power consumption
E. None of the above
Answer» E. None of the above
1818.

Which of the following holds data and processing instructions temporarily until the CPU needs it?

A. ROM
B. control unit
C. main memory
D. coprocessor chips
E. None of the above
Answer» D. coprocessor chips
1819.

The language that is an input for statement translation is called

A. Assembly language
B. Source language
C. High-level language
D. Object language
E. None of the above
Answer» C. High-level language
1820.

All the instructions and procedures needed to start up a computer, to the point it can load an operating system, are stored in ROM chips. In IBM compatible PCs this is called the _____

A. RAM BIOS
B. ROM BIOS
C. EPROM
D. POST
E. None of the above
Answer» C. EPROM
1821.

A hybrid computer uses a _____ to convert digital signals from a computer into analog signals.

A. Modulator
B. Demodulator
C. Modem
D. Decoder
E. None of the above
Answer» D. Decoder
1822.

A group of magnetic tapes, videos or terminals usually under the control of one master is

A. Cylinder
B. Cluster
C. Surface
D. Track
E. None of the above
Answer» C. Surface
1823.

Any device that performs signal conversion is

A. Modulator
B. Modem
C. Keyboard
D. Plotter
E. None of the above
Answer» B. Modem
1824.

A type of channel used to connect a central processor and peripherals which uses multipling is known as

A. Modem
B. Network
C. Multiplexer
D. All of the above
E. None of the above
Answer» D. All of the above
1825.

The first generation of computers available was based on the bit micro processors.

A. 4
B. 8
C. 16
D. 64
E. None of the above
Answer» C. 16
1826.

The complete picture of data stored in database is known as

A. Record
B. Schema
C. System flowchart
D. DBMS
E. None of the above
Answer» C. System flowchart
1827.

Which of the following is intended to be used in all applications runs on mainframe computers.

A. LOGO
B. APL
C. PL/1
D. OCCAM
E. None of the above
Answer» D. OCCAM
1828.

When was punched-card equipment used for the first time to process the British census?

A. 1910
B. 1907
C. 1911
D. 1914
E. None of the above
Answer» D. 1914
1829.

As compared to diskettes, the hard disks are

A. more expensive
B. more portable
C. less rigid
D. slowly accessed
E. None of the above
Answer» B. more portable
1830.

What is the name given to the molecular-scale computer?

A. Femtocomputer
B. Nanocomputer
C. Supercomputer
D. Microcomputer
E. None of the above
Answer» C. Supercomputer
1831.

Who is considered the 'father' of the minicomputer and one of the founder fathers of the modern computer industry world-wide?

A. George Tate
B. Kenneth H. Olsen
C. Seymour Cray
D. Basic Pascal
E. None of the above
Answer» C. Seymour Cray
1832.

The first microprocessors produced by Intel Corpn. and Texas Instruments were used primarily to control small

A. microwave ovens
B. washing machines
C. calculators
D. personal computers
E. robotics
Answer» D. personal computers
1833.

Which printer uses a combination of laser-beam & electro photographic techniques.

A. Laser printers
B. Dot-Matrix
C. Line printer
D. Daisy wheel
E. None of the above
Answer» B. Dot-Matrix
1834.

A technique used by codes to convert an analog signal into a digital bit stream is known as

A. Pulse code modulation
B. Pulse stretcher
C. Query processing
D. Queue management
E. None of the above
Answer» B. Pulse stretcher
1835.

An optical input device that interprets pencil marks on paper media is

A. O.M.R
B. Punch card reader
C. Optical scanners
D. Magnetic tape
E. None of the above
Answer» B. Punch card reader
1836.

Most important advantage of an IC is its

A. Easy replacement in case of circuit failure
B. Extremely high reliability
C. Reduced cost
D. Low power consumption
E. None of the above
Answer» C. Reduced cost
1837.

Data division is the third division of a _____ program.

A. COBOL
B. BASIC
C. PASCAL
D. FORTH
E. None of the above
Answer» B. BASIC
1838.

Which language was devised by Dr. Seymour Aubrey Papert?

A. APL
B. COBOL
C. LOGO
D. FORTRAN
E. None of the above
Answer» D. FORTRAN
1839.

If digital data rate of 9600 bps is encoded using 8-level phase shift keying (PSK) method, the modulation rate is

A. 1200 bands
B. 3200 bands
C. 4800 bands
D. 9600 bands
E. None of the above
Answer» C. 4800 bands
1840.

When the computer provides the manager with a multiple choice of possible answers, the prompting technique is

A. question and answer
B. form filling
C. open-ended question
D. menu selection
E. None of the above
Answer» E. None of the above
1841.

What are the data transmission channels available for carrying data from one location to another?

A. Narrowband
B. Voiceband
C. Broadband
D. All of the above
E. None of the above
Answer» E. None of the above
1842.

Demodulation is the process of

A. converting digital signals to analog signals
B. converting analog signals to digital signals
C. combining many low speed channels into one high speed channel
D. dividing the high-speed signals into frequency bands
E. None of the above
Answer» C. combining many low speed channels into one high speed channel
1843.

Devices interconnected by the LAN should include

A. Computers and terminals
B. mass storage device, printers and plotters
C. bridges and gateways
D. All of the above
E. None of the above
Answer» E. None of the above
1844.

Which of the following technique is used for encapsulation?

A. a technique used in best-effort delivery systems to avoid endlessly looping packets.
B. a technique used by protocols in which a lower level protocol accepts a message from a higher level protocol and places it in the data portion of the low level frame.
C. One of the pieces that results when an IP gateway divides an IP datagram into smaller pieces for transmission across a network that cannot handle the original datagram size
D. All of the above
E. None of the above
Answer» C. One of the pieces that results when an IP gateway divides an IP datagram into smaller pieces for transmission across a network that cannot handle the original datagram size
1845.

You are working with three networks that have the network IDs 192.168.5.0, 192.168.6.0, and 192.168.7.0. What subnet mask can you use to combine these addresses into one?

A. 255.255.252.0
B. 225.255.254.0
C. 255.255.255.240
D. 255.255.255.252
Answer» B. 225.255.254.0
1846.

Which of the following best illustrates the default subnet mask for a class A,B, and C Network?

A. 0.0.0.0, 0.0.0.1, 0.0.1.1
B. 255.255.255.0, 255.255.0.0, 255.0.0.0
C. 255.0.0.0, 255.255.0.0, 255.255.255.0
D. 255.255.0.0, 255.255.255.0, 255.255.255.255
E. None of the above
Answer» D. 255.255.0.0, 255.255.255.0, 255.255.255.255
1847.

HOSTS file entries are limited to how many characters?

A. 8
B. 255
C. 500
D. Unlimited
E. None of the above
Answer» C. 500
1848.

What frequency range is used for FM radio transmission?

A. Very Low Frequency : 3 kHz to 30. kHz
B. Low Frequency : 30 kHz to 300 kHz
C. High Frequency : 3 MHz to 30 MHz
D. Very High Frequency : 30 MHz to 300 MHz
E. None of the above
Answer» E. None of the above
1849.

An example of an analog communication method is

A. laser beam
B. microwave
C. voice grade telephone line
D. All of the above
E. None of the above
Answer» E. None of the above
1850.

Which of the following layer protocols are responsible for user and the application programme support such as passwords, resource sharing, file transfer and network management?

A. Layer 7 protocols
B. Layer 6 protocols
C. Layer 5 protocols
D. Layer 4 protocols
E. None of the above
Answer» B. Layer 6 protocols