Explore topic-wise MCQs in Chemical Engineering.

This section includes 595 Mcqs, each offering curated multiple-choice questions to sharpen your Chemical Engineering knowledge and support exam preparation. Choose a topic below to get started.

301.

Aryl benzene sulphonate (ABS) is a

A. detergent.
B. plasticiser for unsaturated polyester.
C. starting material for the synthesis of glycerine.
D. coating ingredient for photographic film.
Answer» B. plasticiser for unsaturated polyester.
302.

Main constituents of cotton fiber is

A. lignin
B. cellulose
C. starch
D. gelatine
Answer» C. starch
303.

Starting raw material for the manufacture of maleic anhydride is

A. n-butene
B. benzene
C. either (a) or (b)
D. neither (a) nor (b)
Answer» D. neither (a) nor (b)
304.

Stereospecific agents are exemplified by

A. radiation
B. supported metal oxide catalysts
C. ziegler catalysts
D. all (a), (b) & (c)
Answer» E.
305.

Hydrogenation of oil takes place in a/an __________ reactor.

A. autothermal
B. trickle bed
C. plug flow
D. none of these
Answer» C. plug flow
306.

White phosphorous is stored under water, because

A. it does not react with water.
B. it is poisonous.
C. its kindling temperature in dry air is very low.
D. it is unstable.
Answer» D. it is unstable.
307.

Oleum produces fumes of

A. SO2
B. H2SO4
C. SO3
D. SO2 + H2SO4
Answer» D. SO2 + H2SO4
308.

Gun powder uses

A. sulphur
B. charcoal
C. potassium nitrate
D. all (a), (b), & (c)
Answer» E.
309.

Dry ice (solidified CO2) is used for the

A. storage & shipment of frozen foods and ice-creams.
B. liquefaction of permanent gases.
C. liquefaction of natural gas.
D. none of these.
Answer» B. liquefaction of permanent gases.
310.

Which of the following is the second major component of cement ?

A. Al2O3
B. SiO2
C. CaO
D. Fe2O3
Answer» C. CaO
311.

Solvay process as compared to dual process (i.e. modified Solvay process)

A. can use low grade brine.
B. has less corrosion problems.
C. involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl.
D. both (b) and (c).
Answer» E.
312.

Varnish does not contain

A. thinner
B. pigment
C. both (a) & (b)
D. neither (a) nor (b)
Answer» C. both (a) & (b)
313.

The main use of activated carbon in water treatment is to control

A. bacterial growth
B. taste and odour
C. turbidity
D. none of these
Answer» C. turbidity
314.

__________ iron is the purest form of iron.

A. Cast
B. Wrought
C. Pig
D. High silicon
Answer» C. Pig
315.

Which of the following is not produced on commercial scale from sea water?

A. Bromine.
B. Magnesium compounds.
C. Potassium compounds.
D. Sodium sulphate.
Answer» E.
316.

Thermal pyrolysis of ethylene dichloride produces

A. trichloroethylene
B. vinyl chloride
C. ethanol amine
D. ethylene oxide
Answer» C. ethanol amine
317.

During the absorption of HCl gas in water (to produce liquid HCl), the gas is kept above dew point to

A. increase the rate of absorption.
B. avoid corrosion.
C. reduce the cooling water circulation rate.
D. none of these.
Answer» C. reduce the cooling water circulation rate.
318.

Glycerine is a by-product of the __________ industry.

A. soap
B. detergent
C. oil hydrogenation
D. paint
Answer» B. detergent
319.

Cumene (isopropyl benzene) is made by

A. oxidation of napthalene.
B. propylene alkylation of benzene.
C. polymerisation of a mixture of benzene & propylene.
D. none of these.
Answer» C. polymerisation of a mixture of benzene & propylene.
320.

Adipic acid is an intermediate in the manufacture of

A. perspex
B. nylon-66
C. polystyrene
D. bakelite
Answer» C. polystyrene
321.

Chemical name of soda ash is

A. sodium bicarbonate
B. sodium thiosulphate
C. potassium carbonate
D. none of these
Answer» E.
322.

High magnesia lime is added to hot sugar cane juice (during the manufacture of sugar) to

A. flocculate the impurities.
B. facilitate fast filtration.
C. both (a) and (b).
D. neither (a) nor (b).
Answer» D. neither (a) nor (b).
323.

CaO is called

A. quick lime
B. slaked lime
C. limestone
D. calcite
Answer» B. slaked lime
324.

Lurgi coal gasifier is a pressurised __________ bed reactor.

A. moving
B. fixed
C. fluidised
D. entrained
Answer» B. fixed
325.

Zeolite is a/an

A. naturally occuring clay which is capable of exchanging cations.
B. abrasive material.
C. catalyst used in shift conversion.
D. none of these.
Answer» B. abrasive material.
326.

Mercury cells for caustic soda manufacture, compared to diaphragm cells

A. require lower initial investment.
B. require more power.
C. produce lower concentration NaOH.
D. none of these.
Answer» E.
327.

Brackish water which contains mostly dissolved salt, can be purified by the __________ process.

A. reverse osmosis
B. sand filter
C. lime soda
D. permutit
Answer» B. sand filter
328.

Exothermic neutralisation reaction between caustic soda and dodecylbenzene sulphonic acid produces sodium dodecylbenzene sulphate, which is a/an

A. explosive
B. soap
C. detergent
D. analgesic drug
Answer» D. analgesic drug
329.

Most commonly used rubber vulcanising agent is

A. sulphur
B. bromine
C. platinum
D. alumina
Answer» B. bromine
330.

The manufacture of Kraft pulp is done by a/an __________ process.

A. alkaline
B. acidic
C. neutral
D. none of these
Answer» B. acidic
331.

Which of the following is not a pyrite ore?

A. Celestite
B. Galena
C. Gypsum
D. Siderite
Answer» E.
332.

In industrial nomenclature, alcohol means

A. butyl alcohol
B. propyl alcohol
C. ethanol
D. methyl alcohol
Answer» D. methyl alcohol
333.

Cation exchanger is regenerated usually with

A. NaOH
B. H2SO4
C. hydrazine
D. alum solution
Answer» C. hydrazine
334.

P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as

A. bakelite
B. neoprene
C. teflon
D. nylon-66
Answer» D. nylon-66
335.

Glycerine is recovered from lye by

A. evaporation followed by vacuum distillation.
B. liquid extraction technique.
C. extractive distillation technique.
D. none of these.
Answer» B. liquid extraction technique.
336.

Vanillin is a type of

A. anti-pyretic drug
B. food preservative
C. flavour
D. dye
Answer» D. dye
337.

__________ is used as a catalyst in fat splitting.

A. ZnO
B. Ni
C. V2O5
D. FeO
Answer» B. Ni
338.

Pick out the true statement pertaining to water treatment.

A. Slow sand filters can remove colour completely.
B. Activated carbon can be used for taste & odour control without subsequent filtration.
C. Application of activated carbon reduces the temporary hardness of water.
D. Normally, the turbidity is removed by adding a coagulent prior to sedimentation.
Answer» E.
339.

The most stable allotropic form of phosphorous is the __________ phosphorous.

A. white
B. black
C. yellow
D. red
Answer» C. yellow
340.

Sand and __________ is fused at 1300°C, to produce sodium silicate.$

A. limestone
B. soda ash
C. coke
D. sodium sulphate
Answer» C. coke
341.

Carboxymethyl cellulose (CMC) is added in detergents to act as a/an

A. surfactant
B. builder
C. optical brightening agent
D. anti soil redeposition agent
Answer» E.
342.

BHC (Benzene hexachloride) is made by the chlorination of benzene

A. which is an addition reaction.
B. which is a substitution reaction.
C. in absolute dark.
D. in presence of sunlight.
Answer» B. which is a substitution reaction.
343.

Use of water having dissolved oxygen in boilers promotes

A. corrosion
B. sequestration
C. scale formation
D. none of these
Answer» B. sequestration
344.

Oil produced by solvent extraction

A. has low free fatty acid content.
B. is odourless.
C. both (a) &(b).
D. neither (a) nor (b).
Answer» E.
345.

Zeolite used in water softening process (cation exchange) is regenerated by washing with

A. brine
B. chloramines
C. sodium bisulphite
D. liquid chlorines
Answer» B. chloramines
346.

High acid value of an oil or fat is an indication of

A. storage under improper conditions.
B. absence of unsaturation.
C. its smaller molecular weight.
D. none of these.
Answer» B. absence of unsaturation.
347.

__________ is not a constituent of gun powder.

A. Carbon
B. Charcoal
C. Sulphur
D. Potassium nitrate
Answer» B. Charcoal
348.

Which of the following is the purest form of water out of the following ?

A. Underground water
B. Rain water
C. Well water
D. Lake water
Answer» C. Well water
349.

High temperature carbonisation of coal takes place at __________ °C.$

A. 2000
B. 700
C. 1100
D. < 500
Answer» D. < 500
350.

During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as$

A. it is very corrosive at elevated temperature.
B. its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be further reduced).
C. it decomposes on further increasing the temperature.
D. none of these.
Answer» C. it decomposes on further increasing the temperature.