Explore topic-wise MCQs in Electronic Devices Circuits.

This section includes 15 Mcqs, each offering curated multiple-choice questions to sharpen your Electronic Devices Circuits knowledge and support exam preparation. Choose a topic below to get started.

1.

A shunt capacitor of value 500µF fed rectifier circuit. The dc voltage is 14.43V. The dc current flowing is 200mA. It is operating at a frequency of 50Hz. What will be the value of peak rectified voltage?

A. 18.67V
B. 16.43V
C. 15.98V
D. 11.43V
Answer» C. 15.98V
2.

The rms ripple voltage (Vrms) of a shunt filter is_________

A. IDC/2√3
B. IDC2√3
C. IDC/√3
D. IDC√3
Answer» B. IDC2√3
3.

A full wave rectifier uses a capacitor filter with 500µF capacitor and provides a load current of 200mA at 8% ripple. Calculate the dc voltage.

A. 15.56V
B. 20.43V
C. 11.98V
D. 14.43V
Answer» E.
4.

A 100µF capacitor when used as a filter has 15V ac across it with a load resistor of 2.5KΩ. If the filter is the full wave and supply frequency is 50Hz, what is the percentage of ripple frequency in the output?

A. 2.456%
B. 1.154%
C. 3.785%
D. 3.675%
Answer» C. 3.785%
5.

A half wave rectifier, operated from a 50Hz supply uses a 1000µF capacitance connected in parallel to the load of rectifier. What will be the minimum value of load resistance that can be connected across the capacitor if the ripple% not exceeds 5?

A. 114.87Ω
B. 167.98Ω
C. 115.47Ω
D. 451.35Ω
Answer» D. 451.35Ω
6.

THE_RMS_RIPPLE_VOLTAGE_(VRMS)_OF_A_SHUNT_FILTER_IS_________?$

A. I<sub>DC</sub>/2‚àö3
B. I<sub>DC</sub>2‚àö3
C. I<sub>DC</sub>/‚àö3
D. I<sub>DC</sub>‚àö3
Answer» B. I<sub>DC</sub>2‚Äö√Ñ√∂‚àö‚Ć‚àö‚àÇ3
7.

A_shunt_capacitor_of_value_500µF_fed_rectifier_circuit._The_dc_voltage_is_14.43V._The_dc_current_flowing_is_200mA._It_is_operating_at_a_frequency_of_50Hz._What_will_be_the_value_of_peak_rectified_voltage?$#

A. 18.67V
B. 16.43V
C. 15.98V
D. 11.43V
Answer» C. 15.98V
8.

Which of the following are true about capacitor filter?

A. It is also called as capacitor output filter
B. It is electrolytic
C. It is connected in parallel to load
D. It helps in storing the magnetic energy
Answer» C. It is connected in parallel to load
9.

The charge (q) lost by the capacitor during the discharge time for shunt capacitor filter.

A. I<sub>DC</sub>*T
B. I<sub>DC</sub>/T
C. I<sub>DC</sub>*2T
D. I<sub>DC</sub>/2T
Answer» B. I<sub>DC</sub>/T
10.

A full wave rectifier uses a capacitor filter with 500µF capacitor and provides a load current of 200mA at 8% ripple. Calculate the dc voltage.$

A. 15.56V
B. 20.43V
C. 11.98V
D. 14.43V
Answer» E.
11.

A 100µF capacitor when used as a filter has 15V ac across it with a load resistor of 2.5KΩ. If the filter is the full wave and supply frequency is 50Hz, what is the percentage of ripple frequency in the output?$

A. 2.456%
B. 1.154%
C. 3.785%
D. 3.675%
Answer» C. 3.785%
12.

A half wave rectifier, operated from a 50Hz supply uses a 1000µF capacitance connected in parallel to the load of rectifier. What will be the minimum value of load resistance that can be connected across the capacitor if the ripple% not exceeds 5?$

A. 114.87Ω
B. 167.98Ω
C. 115.47Ω
D. 451.35Ω
Answer» D. 451.35‚Äö√Ñ√∂‚àö√´¬¨‚àÇ
13.

The rectifier current is a short duration pulses which cause the diode to act as a_________

A. Voltage regulator
B. Mixer
C. Switch
D. Oscillator
Answer» D. Oscillator
14.

The cut-in point of a capacitor filter is_________

A. The instant at which the conduction starts
B. The instant at which the conduction stops
C. The time after which the output is not filtered
D. The time during which the output is perfectly filtered
Answer» B. The instant at which the conduction stops
15.

In a shunt capacitor filter, the mechanism that helps the removal of ripples is_________

A. The current passing through the capacitor
B. The property of capacitor to store electrical energy
C. The voltage variations produced by shunting the capacitor
D. Uniform charge flow through the rectifier
Answer» C. The voltage variations produced by shunting the capacitor